Skip to content

Gloster Meteor 700mm (twin 30mm EDF)

WhatsApp-Image-2024-04-23-at-20.13.14_8d38314e1.jpg Gloster Meteor 700mm (twin 30mm EDF)
WhatsApp-Image-2024-04-23-at-20.13.15_4e7d9017.jpg Gloster Meteor 700mm (twin 30mm EDF)
WhatsApp-Image-2024-04-23-at-20.13.14_e6104715.jpg Gloster Meteor 700mm (twin 30mm EDF)
WhatsApp-Image-2024-04-23-at-20.13.14_f005eb29.jpg Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-10042024-112815-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
1.jpg Gloster Meteor 700mm (twin 30mm EDF)
4.jpg Gloster Meteor 700mm (twin 30mm EDF)
7.png Gloster Meteor 700mm (twin 30mm EDF)
8.png Gloster Meteor 700mm (twin 30mm EDF)
9.png Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-4062024-105409-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-4062024-105046-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-4062024-105355-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-4062024-105359-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
Fullscreen-capture-4062024-105404-PM.jpg Gloster Meteor 700mm (twin 30mm EDF)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
6 files (PDF and ZIP) Close
  • Gloster Meteor 700mm assembly manual.pdf
  • Gloster Meteor 700mm print settings.pdf
  • Meteor part files (fff-stl-gcode).zip
    • fff/fuselage/canopy front.factory
    • fff/fuselage/canopy rear.factory
    • fff/fuselage/fuse 1.factory
    • fff/fuselage/fuse 2.factory
    • fff/fuselage/fuse 3.factory
    • fff/fuselage/fuse 4.factory
    • fff/fuselage/fuse 5.factory
    • fff/nacelles/edf cover front left.factory
    • fff/nacelles/edf cover front right.factory
    • fff/nacelles/edf cover rear left.factory
    • fff/nacelles/edf cover rear right.factory
    • fff/nacelles/edf ring (PLA).factory
    • fff/nacelles/nacelle front left.factory
    • fff/nacelles/nacelle front right.factory
    • fff/nacelles/nacelle rear left.factory
    • fff/nacelles/nacelle rear right.factory
    • fff/tail/elevator left.factory
    • fff/tail/elevator right.factory
    • fff/tail/horzontal stabilizer left.factory
    • fff/tail/horzontal stabilizer right.factory
    • fff/tail/rudder lower.factory
    • fff/tail/rudder upper.factory
    • fff/tail/tail central connection front.factory
    • fff/tail/tail central connection rear.factory
    • fff/tail/vertical stabilizer lower.factory
    • fff/tail/vertical stabilizer upper.factory
    • fff/wings/aileron left.factory
    • fff/wings/aileron right.factory
    • fff/wings/wing inner left.factory
    • fff/wings/wing inner right.factory
    • fff/wings/wing outer left.factory
    • fff/wings/wing outer right.factory
    • fff/wings/wingtips.factory
    • gcode/fuselage/canopy front (CLEAR PLA).gcode
    • gcode/fuselage/canopy rear.gcode
    • gcode/fuselage/fuse 1.gcode
    • gcode/fuselage/fuse 2.gcode
    • gcode/fuselage/fuse 3.gcode
    • gcode/fuselage/fuse 4.gcode
    • gcode/fuselage/fuse 5 v1.1.gcode
    • gcode/nacelles/edf cover front left.gcode
    • gcode/nacelles/edf cover front right.gcode
    • gcode/nacelles/edf cover rear left.gcode
    • gcode/nacelles/edf cover rear right.gcode
    • gcode/nacelles/edf ring (pla).gcode
    • gcode/nacelles/front left.gcode
    • gcode/nacelles/front right.gcode
    • gcode/nacelles/rear left.gcode
    • gcode/nacelles/rear right.gcode
    • gcode/tail/elevator left.gcode
    • gcode/tail/elevator right.gcode
    • gcode/tail/horizontal stabilizer left.gcode
    • gcode/tail/horizontal stabilizer right.gcode
    • gcode/tail/rudder lower.gcode
    • gcode/tail/rudder upper.gcode
    • gcode/tail/tail central connection front.gcode
    • gcode/tail/tail central connection rear.gcode
    • gcode/tail/vertical stabilizer lower.gcode
    • gcode/tail/vertical stabilizer upper v1.1.gcode
    • gcode/wings/aileron left.gcode
    • gcode/wings/aileron right.gcode
    • gcode/wings/inner left.gcode
    • gcode/wings/inner right.gcode
    • gcode/wings/outer left.gcode
    • gcode/wings/outer right.gcode
    • gcode/wings/wingtip left.gcode
    • stl/fuselage/canopy front.stl
    • stl/fuselage/canopy rear.stl
    • stl/fuselage/fuse 1.stl
    • stl/fuselage/fuse 2.stl
    • stl/fuselage/fuse 3.stl
    • stl/fuselage/fuse 4.stl
    • stl/fuselage/fuse 5 v1.1.stl
    • stl/fuselage/fuse 5.stl
    • stl/nacelles/edf cover front left.stl
    • stl/nacelles/edf cover front right.stl
    • stl/nacelles/edf cover rear left.stl
    • stl/nacelles/edf cover rear right.stl
    • stl/nacelles/edf ring.stl
    • stl/nacelles/front left.stl
    • stl/nacelles/front right.stl
    • stl/nacelles/rear left v1.1.stl
    • stl/nacelles/rear left.stl
    • stl/nacelles/rear right v1.1.stl
    • stl/nacelles/rear right.stl
    • stl/tail/elevator inner left.stl
    • stl/tail/elevator outer left.stl
    • stl/tail/elevator right.stl
    • stl/tail/horizontal stabilizer left v1.1.stl
    • stl/tail/horizontal stabilizer right v1.1.stl
    • stl/tail/rudder lower.stl
    • stl/tail/rudder upper.stl
    • stl/tail/tail central connection front.stl
    • stl/tail/tail central connection rear.stl
    • stl/tail/vertical stabilizer lower.stl
    • stl/tail/vertical stabilizer upper.stl
    • stl/wings/aileron left.stl
    • stl/wings/aileron right.stl
    • stl/wings/inner left.stl
    • stl/wings/inner right.stl
    • stl/wings/outer left.stl
    • stl/wings/outer right.stl
    • stl/wings/wingtip left.stl
    • stl/wings/wingtip right.stl
  • Part orientation images (POI).zip
  • bonus extra items.zip
    • 1mm wire lock/fff/push rod lock 1mm.factory
    • 1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode
    • 1mm wire lock/stl/1mm wire stop clamp A .stl
    • 1mm wire lock/stl/1mm wire stop clamp B.stl
    • CoG balancer/FFF/balancer long arm version.factory
    • CoG balancer/FFF/balancer shot arm (600mm model) version.factory
    • CoG balancer/G-CODE/balancer long arm version.gcode
    • CoG balancer/G-CODE/balancer shot arm (600mm model) version.gcode
    • CoG balancer/STL/arm.stl
    • CoG balancer/STL/base plate.stl
    • CoG balancer/STL/long arm.stl
    • QX30mm 7000kv EDF upgrades/30mm impeller/fff/70mm pitch 4 blade.factory
    • QX30mm 7000kv EDF upgrades/30mm impeller/fff/70mm pitch 5 blade.factory
    • QX30mm 7000kv EDF upgrades/30mm impeller/fff/70mm pitch 6 blade.factory
    • QX30mm 7000kv EDF upgrades/30mm impeller/fff/70mm pitch 7 blade.factory
    • QX30mm 7000kv EDF upgrades/30mm impeller/gcode/70mm pitch 4 blade.gcode
    • QX30mm 7000kv EDF upgrades/30mm impeller/gcode/70mm pitch 5 blade.gcode
    • QX30mm 7000kv EDF upgrades/30mm impeller/gcode/70mm pitch 6 blade.gcode
    • QX30mm 7000kv EDF upgrades/30mm impeller/gcode/70mm pitch 7 blade.gcode
    • QX30mm 7000kv EDF upgrades/30mm impeller/REE - Print settings and fan (thrust-amp) test results.txt
    • QX30mm 7000kv EDF upgrades/30mm impeller/stl/70p 4b v1.2.stl
    • QX30mm 7000kv EDF upgrades/30mm impeller/stl/70p 5b v1.2 265g.stl
    • QX30mm 7000kv EDF upgrades/30mm impeller/stl/70p 6b v1.2.stl
    • QX30mm 7000kv EDF upgrades/30mm impeller/stl/70p 7b v1.2.stl
    • QX30mm 7000kv EDF upgrades/shaft centering tool/FFF/shaft centering tool.factory
    • QX30mm 7000kv EDF upgrades/shaft centering tool/g-code/housing mount.gcode
    • QX30mm 7000kv EDF upgrades/shaft centering tool/read me.txt
    • QX30mm 7000kv EDF upgrades/shaft centering tool/stl/housing mount.stl
    • QX30mm 7000kv EDF upgrades/shaft centering tool/stl/shaft mount.stl
  • profiles, templates and more.zip
    • bambu studio template.3mf
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/PLA_direct_drive.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • how to adjust settings at different z-heights (READ ME).txt
    • prusa slicer template.3mf

Learn more about the formats
Last update 2024-07-04 at 15:53
Publication date 2024-06-05 at 12:07
Design number 2045876
3D_Aeroworks

3D_Aeroworks

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

OVERVIEW:

This replica of the Gloster is designed for quick and easy construction and printed using lightweight PLA (LW-PLA). Designed to suit the QX 30mm EDF 7000kv. Utilizing 4 channel controls; Aileron, Elevator, Rudder and Throttle along with the powerful combination of twin EDFs, this model is fully capable of scale aerobatics maneuvers such as; Loops, Barrel-rolls and J-turns.. Links to components used can be found on the last page of the guide.

Official flight video:

https://www.youtube.com/watch?v=s35RM-Uqa0Y&t

TEST FILES:

https://cults3d.sitegames.net/en/3d-model/various/gloster-meteor-700mm-twin-30mm-edf-aeroworks3d

GENERAL SPECIFICATIONS:

WINGSPAN: 700mm
PRINT WEIGHT: 290g

FLYING WEIGHT: 520g

ELECTRICS:

MOTOR: QX 30mm edf 7000kv

ESC: 15amp

SERVOS: 3.7g MICRO

BATTERY: 1400mah 3s

INCLUDED:

Factory files for Simplify 3d
G-code files
STL files for all components
Detailed assembly manual and guide
Print settings guide

MINIMUM BUILD VOLUME: 200mm x 200mm x 200mm

REQUIRED TOOLS:

KNIFE
LIGHTER

SANDPAPER (MEDIUM GRIT 320 recommended)
PLIERS
CA GLUE (super glue)
SCREW DRIVERS
FILE OR RASP
SOLDERING IRON (led version)
DRILL

REQUIRED COMPONENTS:

X2 QX 30mm EDF 7000kv
X2 15 AMP ESC
X1 1400mah 3s

X4 3.7g Micro servo
X2 10x10x2mm MAGNET (ROUND)
X1 Y-lead servo wire lead
X12 Micro nylon hinges
1mm piano wire (460mm min)
VELCRO
M2 x 6mm screws
3mm BAMBOO FOOD SKEWERS

3D printing settings

Print settings document, templates for cura, bambu studio and prusa slicer included

Categories

Various

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.