CORVETTE C4 ZR1 LT5 - 32V - ENGINE

Engine designed by LOTUS for Chevrolet, it equipped the Corvette ZR1 (1990 - 1995), equipped with 32 valve heads (5.7L), the performance for the time was exciting (over 400 HP) the performance of this Corvette was incredible, the 32 valve project was then abandoned to return to the classic 2 valve per cylinder distribution. This engine was complex to design and as usual we paid a lot of attention to making the details, even the most hidden ones, the engine is made of many parts to be assembled by gluing and could equip your new build.
Most of the pieces are skeletonized internally to obtain great realism and to simplify 3d printing.

ZF S6-40 FOR CORVETTE C4 ZR1 - GEARBOX https://cults3d.sitegames.net/en/3d-model/various/zf-s6-40-for-corvette-c4-zr1-gearbox

Disclaimer:
- The resale of my files is NOT allowed
- Printing for commercial use is NOT allowed
For authorizations and concessions please me here on Cults.

The photos represent the engine made with a resin printer, some photos are renderings of the project I made.
It is possible to print with FDM printer at moderate speed but obviously the level of detail will be lower and in some cases the s will be necessary.
These are my printing parameters using Elegoo printers and YAJO standard resin.

PRINTER............BASE EXPO....NORMAL EXPO....RES

JUPITER............37sec.............2,0sec.................0,050mm

MARS 2 PRO.......45sec.............4,5sec.................0,050mm

SATURN.............35sec.............3,5sec.................0,050mm

Change scale:

1/10 > 1/25 -40,00 %

1/10 > 1/24 -41,66 %

1/10 > 1/18 -55,55 %

1/10 > 1/16 -62,50 %

1/10 > 1/12 -83,33 %

1/10 > 1/8 -125 %