Sooner or later, vector calculus will be a topic in math lessons. To better visualize vectors, the function of straight lines, etc., it is useful to display them in a three-dimensional coordinate system. This set offers pupils a haptic option for this, which should provide a longer-lasting learning effect than a purely digital version.
Recommendation for the contents of a set:
- 1x x-y plane
- 1x half y-z plane
- 2x stand for the levels
- 12x (15 cm x 0.5 cm) wooden rods with scale
- 18x cone clamp for attaching to the rods to fix them in the planes
- 21x arrows/vectors (3 each in lengths of 2-9 cm; 4 different colors)
- 8x rubber cord for hanging the arrows or for representing straight lines (1.5 mm; 4 different colors)
- 6x t heads with holder for the arrows
- 6x t socket for inserting into the levels
- 6x t socket for attaching to the clamps (see next point)
- 12x clamp for attaching to the wooden stands to represent points (3 in each color)
- 8x plugs for inserting into the plane to represent points (2 in each color)
- 1x tip for the z-axis for attaching to a wooden rod
Instructions for use: If the x-y plane is in the feet and a wooden rod is inserted through the plane so that it touches the table top under the feet, a scale line is exactly at the height of the x-y plane.
Printing instructions:
Before you print the actual coordinate system, print the test part â3dKS_testpiece.stlâ to check whether the individual parts snap into the holes correctly.If not, adjust the hole size in the slicer (Cura: horizontal expansion)
German description / Deutsche Beschreibung:
Frßher oder später ist im Mathematikunterricht Vektorrechnung Thema. Zur besseren Veranschaulichung von Vektoren, der Funktionsterme von Geraden etc. ist es nßtzlich diese in einem dreidimensionalen Koordinatensystem darzustellen. Dieses Set bietet den Schßlern hierfßr eine haptische MÜglichkeit, was einen länger anhaltenden Lerneffekt bieten sollte als eine rein digitale Variante.
Empfehlung fĂźr den Inhalt eines Sets:
⢠1x x-y-Ebene
⢠1x halbe y-z-Ebene
⢠2x Standfuà fßr die Ebenen
⢠12x (15 cm x 0,5 cm) Holzstangen mit Skala
⢠18x Kegelklemme zum Aufstecken auf die Stangen zur Fixierung derselben in den Ebenen
⢠21x Pfeile/Vektoren (Je 3 in den Längen von 2-9 cm; 4 verschiedene Farben)
⢠8x Gummischnur zur Aufhängung der Pfeile oder zur Darstellung von Geraden (1,5 mm; 4 verschiedene Farben)
⢠6x GelenkkÜpfe mit Aufnahme fßr die Pfeile
⢠6x Gelenkpfanne zum Einstecken in die Ebenen
⢠6x Gelenkpfanne zum Aufstecken auf die Klemmen (siehe nächsten Punkt)
⢠12x Klemme zum Aufstecken auf die Holzstanden zur Darstellung von Punkten (3 in jeder Farbe)
⢠8x Stecker zum Einsetzen in die Ebene zur Darstellung von Punkten (2 in jeder Farbe)
⢠1x Spitze fßr die z-Achse zum Aufstecken auf eine Holzstange
Gebrauchshinweis: Steht die x-y-Ebene in den FĂźĂen und steckt man eine Holzstange soweit durch die Ebene, dass diese die Tischplatte unter den FĂźĂen berĂźhrt, liegt ein Skalenstrich genau auf HĂśhe der x-y-Ebene.
Druckhinweis:
Bevor ihr das eigentliche Koordinatensystem druckt, druckt das Testteil "3dKS_testpiece.stl", um zu prĂźfen, ob die einzelnen Teile richtig in die LĂścher einrasten. Wenn nicht t im Slicer die LochgrĂśĂe an (Cura: horizontal expansion)