PET plastic PullStruder

/////Updates/////
10.02.2022 Added an input spool. It's almost all the way to the bottom so that prevents the plastic on it from unraveling completely. It can also be taken out of the holder for ease of putting new plastic on it.

06.02.2022 Added print instructions and plastic usage.
Happy to find out that this whole project only uses 437g of plastic. Also added Ender 3 controller board mount. Its meant to go under the main fan so it gets a lot of airflow.

03.02.2022 Added the Ender 3 LCD mount. Thanks to @jckz82 for the original design.
Also added bearings to the top guide spacers. Make the filament move easy and does not grind against the plastic.

31.01.2022 Upcycled my Monoprice select mini V2. reused its LCD and control board.
Made an LCD bracket that screws into the fan mount. It's printed without s on its side. It droops a little bit at the top but that part is not visible when the MPSM LCD is screwed on. If you need a different type of LCD bracket and control board mounting write in the comments and il design it if you are willing to test print it.

19.01.2022 Added Fan mount to the front of the machine. Planing on adding more extensions to make this a real filament extrusion line.
///////////////////////

Thanks to @Sapienz for the original design. I remixed it to use more common hardware in the 3d printing world and also lowered the part count. Made some improvements to lower filament usage and the time it takes to print everything.

Also working on a custom UI for marlin and custom code for the whole process.
Will be here soon. My stepper driver died last night so I can't test out. Will order new ones soon. Video on the way soon.

Hardware needed:
1x NEMA 17 Stepper
3x 110mm M5 Threaded rods
6x M5 Nuts and washers
3x 130mm M8 Threaded rods
6x M8 Nuts and washers
7x 608 Ball bearings
8x 4mm wood screws (for the base)
2x M3 11mm bolts (for the stepper gear)
2x M3 nuts(also for the stepper gear)

For the additional fan mount you need:
1x 608 Ball bearing
2x 120mm M5 Threaded rods
4x M5 Nuts and washers
8x M3 10mm bolts
8x M3 Nuts and washers
1x 80mm case fan

Sideplate 1.stl - 20% infill - 43g usage
Sideplate 2.stl - 20% infill - 37g usage
Spool Main.stl - 20% infill - 105g usage
Spool Side.stl - 20% infill - 19g usage
Spool spacer.stl - 20% infill - 2g usage
Top Spacer Winder 1 of 2.stl - 20% infill - 5g usage
Top Spacer Winder 2 of 2.stl - 20% infill - 5g usage
GearNo1.stl - 100% infill - 29g usage
GearNo1 Spacer.stl - 20% infill - 1g usage
GearNo2.stl - 100% infill - 31g usage
GearNo2 Spacer.stl - 20% infill - 1g usage
Stepper Gear.stl - 100% infill - 5g usage
Mount Bottom 1.stl - 20% infill - 9g usage
Mount Bottom 2.stl - 20% infill - 9g usage
Mount Bottom Fan.stl - 20% infill - 9g usage
Fan Mount 1.stl - 20% infill - 18g usage
Fan Mount 2.stl - 20% infill - 18g usage
Top Spacer Fan 1 of 2.stl - 20% infill - 5g usage
Top Spacer Fan 2 of 2.stl - 20% infill - 5g usage
MPSM LCD mount.stl - 20% infill - 36g usage
MPSM Controller box.stl - 20% infill -29g usage
MPSM Controler box lid.stl - 20% infill - 16g usage
Ender 3 Controller Mount.stl - 20% infill - 19g usage
Ender_3_LCD_Mount.stl - 20% infill - 29g usage
Ender_3_LCD_Mount_Backplate.stl - 20% infill - 22g usage
Input_Spool_Mount_1.stl - 20% infill - 9g usage
Input_Spool_Mount_2.stl - 20% infill - 9g usage
Input_Spool_1_of_2.stl - 20% infill - 12g usage
Input_Spool_2_of_2.stl - 20% infill - 13g usage