OrbiTable12 – The Ultimate Rotating Platform for Creators

🚀 Your 3D prints deserve the spotlight! 🚀

Tired of static shots that don’t do your work justice? OrbiTable12 is here to elevate your content game! This motorized, 3D-printable turntable is designed for makers, photographers, and 3D printing enthusiasts who want to showcase their models in cinematic, smooth rotation. Whether you’re creating epic product shots, mesmerizing timelapses, or simply flexing your latest print, this is the ultimate tool to bring your designs to life!

For the showcase, I had the honor of using incredible 3D-printed Star Wars figurines, generously provided by UTSAV_GENESIS. If you love highly detailed 3D models, go check out his work at and give him a follow! 🔥

🌀 Features:
• Direct gear drive for smooth and stable rotation.
• USB-powered (5V) with an optional switch for forward/reverse motion.
• Compact 20 cm diameter – ideal for small to medium-sized objects.
• PETG, ASA, or ABS recommended for best durability.
• Snap-in assembly for printed parts, with minor soldering required for the motor (switch optional).

🏗️ Assembly Instructions:
1️⃣ Print all parts according to the recommended settings.
2️⃣ Insert one 623ZZ bearing tightly into the center hole of the base (press-fit).
3️⃣ Attach four additional 623ZZ bearings as wheels, using M3x10 or longer screws.
4️⃣ Solder the power wires to the Mini N20 motor (switch optional).
5️⃣ Press-fit the motor into the holder (tight fit).
6️⃣ Press-fit the gear onto the motor shaft.
7️⃣ Use a recycled USB cable for power (ideally, but a new one can be used if necessary – we upcycling! ♻️).
8️⃣ Snap-in the legs, then glue the cable cover (hot glue or CA glue recommended) for secure attachment.
9️⃣ Plug it in and enjoy seamless rotation!

📂 Included STL Files:
orbitable12-platform-by-ondrahaa.stl → Rotating platform
orbitable12-base-by-ondrahaa.stl → Main base
orbitable12-motor-mount-by-ondrahaa.stl → Motor and cable holder
orbitable12-gear-motor-by-ondrahaa.stl → Gear for direct drive
orbitable12-legs-by-ondrahaa.stl → Snap-in legs
orbitable12-switch-cover-by-ondrahaa.stl → Cover for the micro switch
orbitable12-cable-cover-by-ondrahaa.stl → Cover for the USB cable exit

📌 Ideal For:
✅ 3D printing hobbyists & makers
✅ Product photography & videography
✅ Showcasing figurines, collectibles, and small models

🔽 now and upgrade your content game with smooth, automated rotation!

Notes:
• This model is designed for the Mini N20 DC motor with USB 5V power.
• Switch is optional – the motor runs fine without it.
• Requires 4× 623ZZ bearings + 1× press-fit 623ZZ bearing in the center.
• Ensure all parts fit snugly before running the motor.
• USB power cable must be salvaged from an old device (ideally, but new cables can be used if needed).
• Cable cover should be glued in place for best results (hot glue or CA glue recommended).
• I personally scavenged the switch from a child’s old Star Wars projector. 💀✨

✔ Filament: PETG (recommended), ASA, or ABS (PLA not recommended due to gear wear).
✔ Layer height: 0.2 mm
✔ Infill: 20-30%
✔ s: Tree/Grid combination recommended for precision.
✔ Nozzle size: 0.4 mm
✔ Bed adhesion: Mouse ears instead of full brim for easier removal.