Kobra S1 Riser DUAL ACE PRO

This model is a riser for the Anycubic Kobra S1 that can hold two ACE-PROS.

The riser features (some of the add-on features are available as free to models on Makeronline):

• Rugged design to safely hold dual Ace-pros with filament
• Can hold two Ace-pros
• Two large storage drawers with customizable compartments.
• Side mounted external spool and mount;
• Corner filament guide. It helps prevents jams and tangles by routing the filament around corner and connects to the rear Bowden tube;
• Integrated build plate holder that can hold multiple build plates;
• Tool tray add on
• Lid riser;
• LED mounting bars and LED rear housing;
• Customizable sign (a blank sign STL is included)
• Much more.

UPGRADING FROM SINGLE TO DUAL S1 RISER

If you printed my regular S1 riser (not the LITE) you can re-use many of the parts as they are the same. However, you will need to reprint the rear (left and right) and middle (left and right) as these are different. You will need to print the wing extensions and brackets as well.

Specifications:

The riser adds 15 cm (6 inches) of height to the Kobra S1 and Ace pro combo.

Total height with Ace pro opened is approximately 107 cm (42 inches).
The Kobra S1 riser requires about 2.5 kg of filament for the base unit including drawers and inlays.
The width of the riser is approximately 80 cm (31 inches)

Instructions

All parts are snap fit and require no external hardware or glue.

See the instruction gif in the model's description photos. I also ed a zip file with all the instruction photos.

Add-ons and external model links - available for free on Makeronline:

NEW: - Modular tool tray: https://www.makeronline.com/en/model/MODULAR%20TOOL%20TRAY%20FOR%20KOBRA%20S1%20RISER/175361.html

• Side mounted external spool holder.
  Link: https://www.makeronline.com/en/model/EXTERNAL%20SPOOL%20HOLDER%20FOR%20KOBRA%20S1%20RISER/162262.html

• Corner filament guide
  
  Link: https://www.makeronline.com/en/model/Filament%20guide%20for%20Kobra%20S1%20riser/157315.html

• Lid holder:
  Link:https://www.makeronline.com/en/model/Lid%20holder%20for%20Kobra%20S1%20riser/157317.html

• LED housing:
  Link:https://www.makeronline.com/en/model/LED%20housing%20for%20Kobra%20S1%20riser/157316.html

• Tool tray:
  Link: https://www.makeronline.com/en/model/Tool%20tray%20for%20Kobra%20S1%20DUAL%20ACE%20PRO%20RISER/162256.html

• Drawer comparments
  Link: https://www.makeronline.com/en/model/Drawer%20compartments%20for%20Kobra%20S1%20riser/157319.html

Hot end tray (design by aeromedic7 on MO) https://www.makeronline.com/en/model/Noozle%20and%20hot%20end%20tray%20for%20Kobra%20S1%20Riser%20(Kobra%20S!%20Riser%20by%20Darren%203D%20Prints)/172411.html

Nozzle and hot end compartment (by Brody Richardson): https://www.makeronline.com/en/model/Gridfinity%20Nozzle%20and%20hotend%20compartment%20for%20S1%20Riser/180020.html?fbclid=IwY2xjawKF1ElleHRuA2FlbQIxMABicmlkETFMNmdBd1Bia1NOM2prZlZsAR7auQOcwW2oU3aHYwKsY49Vxl2yY-848MtM7ZOxXPqHeE6gdu08sQR4-sdSfA_aem_PIkve61tzVdUrS1dSXmNdw

3d printing

A print profile is included for the S1. I highly recommend you use the print profile as all the is painted and the parts are correctly positioned.

I HAVE PAINTED ON ALL PARTS ON THE INCLUDED PRINT PROFILE. SLICE IT USING TREE MANUAL.

I have printed each part and tested everything. Tolerances are tight where they have to be. If you are having issues with your printer, your filament or adhesion I suggest you ask for help on Facebook or a forum as I cannot help you there.

I use dovetail ts. If it is a tight fit push the ed parts together as this will give more clearance.

Sample text for notification purposes