Skip to content

Feather Edge Guide for fencing/siding

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
21 files (STL) Close
  • Feather Edge Guide 100 30.stl
  • Feather Edge Guide 100 40.stl
  • Feather Edge Guide 100 50.stl
  • Feather Edge Guide 125 20.stl
  • Feather Edge Guide 125 30.stl
  • Feather Edge Guide 125 40.stl
  • Feather Edge Guide 125 50.stl
  • Feather Edge Guide 150 20.stl
  • Feather Edge Guide 150 30.stl
  • Feather Edge Guide 150 40.stl
  • Feather Edge Guide 150 50.stl
  • Feather Edge Guide 175 20.stl
  • Feather Edge Guide 175 30.stl
  • Feather Edge Guide 175 40.stl
  • Feather Edge Guide 175 50.stl
  • Feather Edge Guide 200 20.stl
  • Feather Edge Guide 200 30.stl
  • Feather Edge Guide 200 40.stl
  • Feather Edge Guide 200 50.stl
  • Feather Edge Guide 75 20.stl
  • Feather Edge Guide 75 30.stl

Learn more about the formats
Publication date 2025-02-15 at 19:19
Design number 2740165
Kahnindustries

Kahnindustries

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

This is a small tool to assist you in spacing feather edge boards

You can either nail through the central hole (for example on one end of the board so that you can rest the next board far end on top)

Or you can use the side notch to line the nail up off to the side allowing you to quickly nail through to the batton or Arris rail below

I have generated different reveal leangths from 75mm to 200mm, but am happy to create any odd sizes that you would like

I have also created variations with the nail holes at 20-50mm in 10mm increments, happy to create any other odd sizes that you need

You push up against the triangle lip just below the size text to pull it tight to the bottom lip of the board that is in place

You should overlap feather edge boards by 40-50mm depending on the width of the board. with the options generated you should be able to choose one that gives you the desired reveal on each board and choose whether you put the nail through the board underneath or over the top

3D printing settings

Print on its side as generated

Categories

DIY

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.