Browning M1919A4 to M1919A6 Conversion Kit

This is a 1:1 conversion kit/addition so that builders can create a M1919A6 version. You will need to acquire "M8 Wing Bolts" also called "Butterfly Screws" with a 25mm grip length if you want to make the bipod fold away. In addition 1/2" Copper Plumbing pipe (North American standard) will be required to make the bipod and well as to reinforce the buttstock.

This is designed to convert my M1919A4 to the A6 style Other versions of M1919s may not be compatible.

There are 2 versions of Bipod Assemblies and 2 versions of Flash Hiders I have designed based on my research.

A new version of the Bolt and Barrel Extension are included if you want to reinforce the entire length of the prop, although this will affect the realistic appearance of the internal components.

Due to the nature of 3D printed materials, the Carry Handle was not designed to actually carry the prop, merely to resemble an actual carry handle, by folding down.

This is a conversion kit only. My Browning M1919A4 is not included and must be purchased separately.

This is only a prop and cannot be made into a weapon.

0.2mm layer height
4 wall thicknesses
Ironing enabled for flat faced parts
Some parts will have to have more wall thicknesses if you want to make this prop more durable.