AutoSwap BambuLab A1 Plate Changer Upgrade Kit V1.3 Final

Automatic license plate change kit for Bambu Lab A1 and Combo model.
full 3mf file

When you run out of prints you send through the Bambu Lab app, the plate is automatically replaced with a new one.
You can easily send your prints through the Bambu Lab app.
If you are doing 3d Farm, it will make your job easier.
I prepared it in the easiest way to use.
extra necessary materials:

3x30 M3 Bolt : 2 pieces
3x20 M3 Bolt : 14 pieces
3x15 M3 Bolt : 8 pieces
3x6 M3 Bolt : 4 pieces for each plate
10x20x2 mm Neodymium magnet : 14 pieces
2 mt length of thick braided fishing line (15Lbs)
1 mt 3D Printer PFTE Teflon Pipe

AutoSwapAPP web:
https://evrenot3d.github.io/autoswap/
AutoSwap :
https://github.com/evrenot3d/autoswap/tree/main

Installation video link:
https://youtu.be/Z8j-sDm8pRI

Multiple Plate Exchange Application:
https://youtu.be/Eo9ns7AqAuk

19_05_2025 Update Notes
Important Note:
If your BambuLab printer does not have the required holes in the Z column.
You do not need to install the screws that attach to the Z-pillar.
1. I found out that some BambuLab A1 models do not have screw holes in the Z-column. I prepared a model update for this.
2. I have provided for bar operation on the build plate holders. This is not a mandatory update.
3. I made a small model change to the plate catcher under the heater bed. The build plates exchange better. If your magnets are giving you trouble, I made a small tire bracket.
4. I organized the PFTE pipe path.
5. I made a reinforcement on the front module.
6. I published the web version of the AutoSwap app on github:
https://evrenot3d.github.io/autoswap/
7. You can the AutoSwap app from github. You can the AutoSwap app on github. You can the Autoswap application from github:
https://github.com/evrenot3d/autoswap/tree/main
8. I updated the assembly and usage videos.
9. The module that holds the build plate needs a lot of , so I made an edit and now you can print without .
10.I organized it so that much less is used.

Note: The web version does not your files to the internet in any way. It processes the files offline on your computer.

11.05.2025 Update notes
1. I increased the number of screws in the plate holder parts for safety reasons, now it has a better holder.
2. Plate holder prints may get stuck due to layer traces, so please do sanding. now it will make a smoother and quieter transition.
3. If you print the plate holder part ABS, it will be much safer.
4. I separated the print files into 2 parts. I separated the ones that need to be printed in ABS as different 3MF files.
5. If you sand the Rear Bottom 2 part, it will make a much smoother transition.
6. You can add your files sequentially in AutoSwapp application.
7. I added the print details into the project.
8. I found out that some A1 models do not have holes on the z-pillar. please do not drill holes on your a1 model. we will release an update as soon as possible and you will not need to drill holes on the z-pillar.

10.05.2025 Update notes:
1. AutoSwap application has been added. Yotube video has been added. the application works offline on your local pc and your files are not ed to the internet.
2. The number of magnets in the Rear Bottom 2-3-4 model has been increased and now it is much better and stronger. this is an important update.
3. The knitting rope line used is 15lbs, better line is also fine.
4. Up to 10 plates can be added, I thought 4 plates were enough for the video.
5. Do not forget to print Rear Bottom 2 and Rear Bottom 3 in ABS or PETG.

Please do not hesitate to send me a message for your questions and suggestions.
[email protected]

Note: I apologize for using DeepL translation because my English is weak.

https://youtube.com/shorts/3D5Hp9gBdIQ?feature=share

Note: The web version does not your files to the internet in any way. It processes the files offline on your computer.