Skip to content

2.25" EXHAUST FABRICATION KIT

Large-Assembly-End.png 2.25" EXHAUST FABRICATION KIT
Large-Assembly-Front.png 2.25" EXHAUST FABRICATION KIT
Large-Assembly.png 2.25" EXHAUST FABRICATION KIT
Expander.png 2.25" EXHAUST FABRICATION KIT
Expolded-View.png 2.25" EXHAUST FABRICATION KIT
whole-Assembly.png 2.25" EXHAUST FABRICATION KIT
IMG_20241121_133020.jpg 2.25" EXHAUST FABRICATION KIT
IMG_20241121_132945.jpg 2.25" EXHAUST FABRICATION KIT
2.25inch-Center-Line-Marker-3-port-Pen-Adjustable-14mm.png 2.25" EXHAUST FABRICATION KIT
2.25inch-Center-Line-Marker-Pen-Adjustable-14mm.png 2.25" EXHAUST FABRICATION KIT
SCH-1.50-Inch1-min.png 2.25" EXHAUST FABRICATION KIT
Pipe-Cut-Marker.png 2.25" EXHAUST FABRICATION KIT
Pipe-Cut-Marker-2.png 2.25" EXHAUST FABRICATION KIT
3.00-Inch-76.2-CLR-Tear-Drop-Exit1.png 2.25" EXHAUST FABRICATION KIT
3.00-Inch-76.2-CLR-Tear-Drop-Exi-2t.png 2.25" EXHAUST FABRICATION KIT
3.00-Inch-76.2-CLR-Tear-Drop-Exit.png 2.25" EXHAUST FABRICATION KIT
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
7 files (ZIP) Close
  • 2.25 Cut Angle Markers.zip
    • 2.25 Inch 57.15 CLR Cut Marker Mirror.stl
    • 2.25 Inch 57.15 CLR Cut Marker.stl
    • 2.25 Inch 85.73 CLR Cut Marker Mirror.stl
    • 2.25 Inch 85.73 CLR Cut Marker.stl
  • 2.25 Inch 57.15 CLR Tear Drop Exit.stl.zip
    • 2.25 Inch 57.15 CLR Tear Drop Exit.stl
  • 2.25 Inch Bends.zip
    • 15 Degree/desktop.ini
    • 15 Degree/Long Radius/2.25 Inch - 15 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 15 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 15 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/2.25 Inch - 30 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 30 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 30 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/2.25 Inch - 45 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 45 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 45 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/2.25 Inch - 60 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 60 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 60 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/2.25 Inch - 75 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 75 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 75 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/2.25 Inch - 90 Degree 85.725 CLR End.stl
    • 15 Degree/Long Radius/2.25 Inch - 90 Degree 85.725 CLR Start.stl
    • 15 Degree/Long Radius/2.25 Inch - 90 Degree 85.725 CLR.stl
    • 15 Degree/Long Radius/desktop.ini
    • 15 Degree/Short Radius/2.25 Inch - 15 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 15 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 15 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/2.25 Inch - 30 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 30 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 30 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/2.25 Inch - 45 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 45 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 45 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/2.25 Inch - 60 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 60 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 60 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/2.25 Inch - 75 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 75 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 75 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/2.25 Inch - 90 Degree 57.15 CLR End.stl
    • 15 Degree/Short Radius/2.25 Inch - 90 Degree 57.15 CLR Start.stl
    • 15 Degree/Short Radius/2.25 Inch - 90 Degree 57.15 CLR.stl
    • 15 Degree/Short Radius/desktop.ini
    • 9 Degree/desktop.ini
    • 9 Degree/Long Radius/2.25 Inch - 18 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 18 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 18 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 27 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 27 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 27 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 36 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 36 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 36 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 54 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 54 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 54 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 63 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 63 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 63 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 72 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 72 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 72 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 81 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 81 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 81 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/2.25 Inch - 9 Degree 85.725 CLR End.stl
    • 9 Degree/Long Radius/2.25 Inch - 9 Degree 85.725 CLR Start.stl
    • 9 Degree/Long Radius/2.25 Inch - 9 Degree 85.725 CLR.stl
    • 9 Degree/Long Radius/desktop.ini
    • 9 Degree/Short Radius/2.25 Inch - 18 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 18 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 18 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 27 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 27 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 27 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 36 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 36 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 36 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 54 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 54 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 54 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 63 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 63 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 63 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 72 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 72 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 72 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 81 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 81 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 81 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/2.25 Inch - 9 Degree 57.15 CLR End.stl
    • 9 Degree/Short Radius/2.25 Inch - 9 Degree 57.15 CLR Start.stl
    • 9 Degree/Short Radius/2.25 Inch - 9 Degree 57.15 CLR.stl
    • 9 Degree/Short Radius/desktop.ini
  • 2.25 Inch Centerline Markers.zip
    • 2.25inch Center Line Marker - Pen Adjustable 14mm.stl
    • 2.25inch Center Line Marker 3 port - Pen Adjustable 14mm.stl
    • Allen Head 15-15 M4.stl
    • Hex Head 15-15 M4.stl
  • 2.25 Inch Expander.zip
    • 2.25 Inch Back Plate.stl
    • 2.25 Inch Clamp.stl
    • 2.25 Inch Expander.stl
  • 2.25 Inch Straight.zip
    • 2.25 Inch - 100mm Straight.stl
    • 2.25 Inch - 105mm Straight.stl
    • 2.25 Inch - 110mm Straight.stl
    • 2.25 Inch - 20mm Straight Start.ipt
    • 2.25 Inch - 20mm Straight Start.stl
    • 2.25 Inch - 20mm Straight.ipt
    • 2.25 Inch - 20mm Straight.stl
    • 2.25 Inch - 25mm Straight.ipt
    • 2.25 Inch - 25mm Straight.stl
    • 2.25 Inch - 30mm Straight Start.stl
    • 2.25 Inch - 30mm Straight.stl
    • 2.25 Inch - 35mm Straight.stl
    • 2.25 Inch - 40mm Straight Start.stl
    • 2.25 Inch - 40mm Straight.stl
    • 2.25 Inch - 45mm Straight.stl
    • 2.25 Inch - 50mm Straight Start.stl
    • 2.25 Inch - 50mm Straight.stl
    • 2.25 Inch - 55mm Straight.stl
    • 2.25 Inch - 60mm Straight.stl
    • 2.25 Inch - 65mm Straight.stl
    • 2.25 Inch - 70mm Straight.stl
    • 2.25 Inch - 75mm Straight.stl
    • 2.25 Inch - 80mm Straight.stl
    • 2.25 Inch - 85mm Straight.stl
    • 2.25 Inch - 90mm Straight.stl
    • 2.25 Inch - 95mm Straight.stl
  • Calculators.zip
    • Exhaust Length Calculator v2.xlsx
    • Runner Length Calculator v2.xlsx

Learn more about the formats
Last update 2025-01-05 at 23:16
Publication date 2024-11-28 at 22:10
Design number 2512933
RkDesigns

RkDesigns

Issue with this design? Report a problem.

3D printer file info

3D model description

This fabrication kit includes everything you need to mock up a 2.25" tubing run. Every bend has a start piece and currently a selection of straight pieces(if you need another size drop a message), with the clips then ready to start your fabrication, then there are a range of angles in 15-degree increments, with two different center line radius. Each is also marked in increments of 15 degrees so you can accurately note the angles at which two pipes sit when translating your design, to further this, it also includes some extra tools for when converting this into metal, the mandrel bend cut markers allow you to turn larger bends like 90 degree into smaller angles, and the center line markers allow to accurately mark either 2 or 3 lines along the length of a 2.25” tube at either 180 degrees or 90 apart respectively.

The kit contains an expander that will fit into an existing pipe or V-band from 53.7-58.4mm, a start piece then attaches to this to allow you to carry on from existing pipe work, or start a new downpipe from scratch. The expander works by using the bolt that the start piece attaches with to compress and expand inside the tube, it also pulls the start piece in to make sure that it doesn’t move while mocking up. Larger systems will need added s. It utilises an o-ring which is used to crip the pipe and also retract the clamps from the inside of the pipe.

Parts Included in this listing:

2.25" expander
53.7-58.4mm expander t for start piece

2.25 Inch, 2.25"(57.15mm) CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
27 degree
30 degree
36 degree
45 degree
54 degree
60 degree
63 degree
72 degree
75 degree
90 degree

2.25 Inch, 3.38"(85.725mm) CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
27 degree
30 degree
36 degree
45 degree
54 degree
60 degree
63 degree
72 degree
75 degree
90 degree

2.25 Inch straight
20mm (Plus Start Piece)
25mm
30mm (Plus Start Piece)
35mm
40mm (Plus Start Piece)
45mm
50mm (Plus Start Piece)
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
95mm
100mm
105mm
110mm

Centerline markers (See my other listing for information on these)
2.25 Inch
https://cults3d.sitegames.net/en/3d-model/tool/centerline-tools-1-to-3

To Be added:

Tubing bend cut guide(See my other listing for information on these)
https://cults3d.sitegames.net/:2168038

Expander BOM:
M8 Allen bolt(Length dependent on clearance 30mm is plenty long enough)
M8 Washer
M8 Nut
O-ring(go no larger than ID50mm x 2mm)
Or small rubber bands also work well

If you want a different pipe size, specific angle or an exhaust flange or turbo Flanges adding to the collectors, drop me a message and I will get back to you as soon as possible.

3D printing settings

See guide availble for free:

https://cults3d.sitegames.net/:2567742

This includes a small description on all files available, it also had a section on printing all of the pieces avalble.

Categories

Machine tools

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.