STOCKING STUFFERS MULTI-PACK - FIDGET KEYCHAIN [PRIVATE USE ONLY] 🧦

PRIVATE USE ONLY

For commercial license and access to additional models, visit my Patreon!

I am super excited for today's release! One of my favorite things to do this time of year is bundle up in front of a cozy fireplace decorated with stockings for all my favorite people! I knew that stocking clickers were an absolute must as they just give me a warm, fuzzy feeling inside! In my family, we all have a stocking with the first letter of our names on it, so in addition to a couple simple designs, I thought it would be cute to create some clicky stockings with letters A-Z! I hope you have some fun with this stocking pack and can't wait to continue to share my festive creations with you all! 🧦

---

Photo Colors 🎨

-Red - Overture Silk Red
-Green - Overture Silk Neon Green
-White - PolyLite Silk White

---

WHAT'S IN THE ?

This pack contains 1 unique base shapes. There are 32 unique flat cap faces and 30 raised variants! Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

---

CLICKER SELECTION

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal s on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

---

LICENSING

This is a PRIVATE USE ONLY license.

Commercial License available on my Patreon

Sharing, remixing or selling of any of the digital files contained in this design is NOT ALLOWED.

---

Stay Pawsitive! 🐾

For model help or other questions, please us at @pawpularprints.com

Layer Height: 0.2mm (recommended)
External Perimeter: 0.33mm (recommended)
Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)
Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

-Small Details (Small Paw Prints, Letters)
-Larger Details (Edge and Toe Banding)
-Everything Else (Base Colors)

I've also found hitting the print with a heat gun right before the main body color starts printing will eliminate any little strings that can cause blemishes on the final design.

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!