Solar Shroom - Space Age Mushroom Lamp 🟠🍄💡🍊✨🔆

Transform your space with the warm and inviting tangerine hues of this juicy and magical 3D printable lamp! Inspired by the iconic Italian Artemide Nesso lamp, it combines bold, organic shapes with a playful, timeless aesthetic. 🟠🍄💡🍊✨🔆

Assembly is simple and requires only the following parts:

• 150-200 gr filament in orange (or any color of your choice)
• To print shade part PLA filament is suggested, it depends on your printer but I couldn't manage to print the shade with PETG but you can print base and shade holder with PETG if you want)
• Lamp cable with an on/off switch
• Generic E14 socket (threaded, 28mm outer width)
• E14 LED bulb (preferably 3000-4000 Kelvin; I tested with cheapest 5W bulb and cheapest generic PLA, which works well without overheating.)
• [Optional] Reusable adhesive tack or dough glue for the bottom of the lamp base (not required but adds extra stability and convenience).

Printing Instructions:
* Use a 3D printer with a print plate size larger than 240mm.
* No s are needed for this design.
* Print the lamp's shade in vase mode. To enhance rigidity, add 3-4 bottom shell layers. Consider increasing the outer wall thickness to 0.50-0.60mm (instead of 0.42mm). I recommend 0.12mm layer height to prevent any overhangs. If you have any issue consider to print slower than other parts. I personally printed with 30-50mm/s speed. Since this is a thin part, also consider reducing the print bed temperature compared to normal settings. For example, when printing with PLA, do not exceed 60°C to prevent any warping.
* Avoid removing prints immediately after finishing. Let the print cool down before detaching it from the print plate to prevent bending or warping due to residual heat.

By purchasing this model you will also have commercial licence to print and sell.

Feel free to DM me anytime with questions or suggestions—I’m here to help 24/7!

Update Log

V2:
* Added higher-resolution STL and STEP files.
* Resolved a minor visual issue with the shade holder that was visible during slicing.
* Improved the constraint design for the Solar Shroom Lamp Base.

V3:
* Introduced a new design for the shade and shade holder, now featuring a pleated surface.
* The pleated design offers a unique aesthetic while addressing the limitations of vase mode printing with flat surfaces, ensuring a stronger and more reliable product.
* Added 3MF files for easier printing with pre-set settings.

Printing Tip: If you encounter issues with your filament while printing the V3 pleated shade, it is recommended to reduce the printing speed and acceleration in your slicer settings for better results.