Kawaii Sun and Clouds STL Files - NO AMS - COMMERCIAL LICENSE

Kawaii Sun and Clouds STL – Adorable 3D Printable Decor (Commercial License)

Bring warmth, joy, and a touch of adorable charm to your space with this Kawaii Sun and Clouds 3D Model! Designed with smooth, rounded features and a cheerful expression, this print is perfect for all ages and makes a fantastic addition to any room.

Licensing:
Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. With this file, you're free to print and sell your finished prints without restriction—ideal for artists, small businesses, and online sellers.

Product Features:
- High-Quality STL Files: Each part of the model, from the rays of the sun to the clouds, is separated into individual pieces for flawless color and detail.
- No AMS Required!: Achieve stunning multi-color prints with simple filament swaps after each color—no AMS (Automatic Material System) needed. A solid model is also included for use with AMS printers.
- Easy to Print: Print pieces by color. This saves time and filament. AND if any part has an issue, you can easily reprint the one piece you need versus reprinting the entire thing!
- Commercial License Included: Print and sell as many as you’d like!
- Puzzle Assembly: Pieces are designed to fit together for an easy, satisfying build. Glue recommended for permanent assembly.

Whether you're decorating a nursery, brightening up your workspace, or selling adorable prints, this Kawaii Sun and Clouds model is the perfect choice. today and start printing happiness! 🌞

SAFETY NOTE:

This model contains small parts that can present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

Assembled Dimensions at full size:
Height: Approx 4.78”
Width: Approx 10.47”
Depth: Approx 1.81"
Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.
Recommended Print Settings:
- s – YES for clouds and rays
- Type - TREE SLIM
- s on Build Plate Only
- Threshold Angle - 30 degrees
- Remove Small Overhangs - NO
- Brim – OUTER – only on small parts unless you have adhesion issues
- Top Z-Distance - .28
- Bottom Z-Distance - .28
- Layer Height – 0.2mm or smaller
- Nozzle Size – 0.4 or smaller
- Seam – NEAREST
- Infill – 15%
- Wall Loops - 2
Print Times with settings above:
1. Rays – 1 hr 2 min
2. Clouds and Eye Highlights – 1 hr 11 min
3. Eyes and Mouth – 13.5 min
4. Cheeks – 7.5 min
5. Sun – 1 hr 7 min