Infinate Desk Tidy For SD, Micro SD and USB

Are you sick of losing your storage media?? Well look no more!!

Print this stacking storage media organiser with infinite expandability!!

Holding a HUGE 9 USB drives on top with a large tray for all your bits and bobs.

Print as many draws as you fancy and stack them into a huge tower!

Each SD draw can hold up to 6 cards per draw!

Each micro SD draw can hold up to 24 cards per draw!

Print 1 top and 1 bottom and then print as many draws as you need. Afterwards print the trays to fit inside them and fill them up!

Print the drawers standing vertically.

print the trays laid flat.

Each tray will have a left and right version, This is the handle location. I recommend printing staggered . if your top tray has the handle on the left then the next will be on the right, left, right, ect……. Otherwise it will be difficult to open the trays.

Once you have completed your magnificent tower I recommend using double sided tape or superglue between each layer to prevent it from coming apart so easily. (although not required)

All of my Designs are covered by a Creative Commons Non-Commercial License. The sale of prints using my designs is the sole right of myself, the designer. Please understand every design is many days of work and multiple prototype prints to ensure quality.

Print using a minimum of 25% infill.

is needed on all files except the SD , micro SD and small trays.