Ghostface - Scream led light box mega bundle

Ghostface / Scream Led box / Plaque

These are designed for multicolour printers but can also be printed on single colour machines.

Are you a horror fan then why not try this quirky / funky LED box light also included is the model which is a plaque 10 mm thick

Also included is a pop out wall art.

3MF files are included for the coloured parts used to print the unit. I would reccomend using your own settings as each printer is different. Printed face down on a textued plate.

There are different variations to the model. See attached images.
Each part or varition which are coloured have a number at the start in brackets [1] [2] etc.
Load the one's with the same number into the slicer at the same time and when prompted load the model as 1, click yes.

Designed around the following lights.

https://amzn.to/3ZR460Z

or alternatively

https://share.temu.com/HoIUZKpuToA

These are to be slid thru the hole in the back plate then fixed around the light internals.

Bring all the front parts into your slicer at the same time and when the prompt lights up to bring in as one, press yes.

3mf file included [Updated]

To be printed on a textured plate.

Alternatives backs also inlcuded with different slot dependeing on how you like to have your lights. wall mounted version has 12 mm holes in the back

I prefer to use the 10 x 1,7 mm slot. Feed the leds all the way thru the back and then lay the back down and peel off the adhesive tape and press around the perimeter of the housing.

Test lights and when happy apply a little dab of glue onto the lip of the back plate.

If you would like to sell this as a physical model, please my patreon: https://patreon.com/?u=54229526

Please help the creative work of each 3D artist and NEVER share or sell a digital file.

0.2 Layer Height