Skip to content

DECORATION FOR FISH TANK AND AQUARIUM, MOBILE SHELL WITH BUBBLES

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
5 files (STL) Close
  • PASADOR.stl
  • PERLA.stl
  • SOPORTE.stl
  • TAPA INFERIOR.stl
  • TAPA SUPERIOR.stl

Learn more about the formats
Publication date 2024-07-22 at 17:20
Design number 2151241
AQUALAND

AQUALAND

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Hello fish tank enthusiasts!

Today I present you this decoration for your fish tank, it is a shell that opens and closes with the use of any aquarium air pump. it has two modes of operation depending on the power of the air pump you use: with a high power pump the shell will open and will not close until the air pump is turned off, with a low power pump the shell will open, let the bubbles out and then close and repeat this cycle indefinitely. You can use an air flow regulator to get the desired effect. I included an additional so you can bury it in the substrate of your aquarium so the shell does not float.

I ed the files separately so you can print them in the color you like, it is important that you print the files as I ed them and do not change the position of any of them because this affects the finish and also affects the pieces do not fit well. Even if it consumes you more material in s do not change the position, I made several prototypes and tests on this model and this is the best result.

This design is for private use with registration and copyright you can not sell, give away, share the file or the printed model. you can not edit the files or imitate their operating mechanisms. If you want to legally sell my designs get a commercial license at this link: Patreon

Don't forget to leave your like on this and the other models, you help me a lot to keep creating.

3D printing settings

There are five files and below I will give you the recommendations for each one:

1: Bottom Cover

Material: PLA or PETG

Layer height: 0.20 mm

Filling: To avoid floating and being very fragile it should be 100%.

: Normal type, just touching the plate with a cantilever angle of 70° (Important: There should be no internal s obstructing the air ducts).

Adhesion: None.

2: Top Cover

Material: PLA or PETG

Layer height: 0.20 mm.

Filling: To avoid floating and being very fragile it should be 100%.

: Normal type, just touching the plate with a cantilever angle of 70°.

Adhesion: None.

3:

Material: PLA or PETG

Layer height: 0.20 mm

Filling: To avoid floating and being very fragile it should be 100%.

: None.

Adhesion: None.

4: ER

Material: PLA OR PETG

Layer height: 0.20 mm

Filling: To prevent it from floating and being very fragile it should be 100%.

: None.

Adhesion: Edge type.

5: PEARL

Material: PLA or PETG

Layer height: 0.20 mm

Filling: To avoid floating and being very fragile it should be 100%.

: normal type, just touching the plate with a cantilever angle of 45°.

Adhesion: Balsa type.

In the model images are the detailed settings you should use.

All parts were designed to fit perfectly however sometimes tolerances change depending on the model and 3d printer configuration.

Remove all traces of s and seams for proper operation, use glue to fix the parts that should no longer move. If the cover does not open easily you will have to sand the necessary parts.

Categories

Pets

Tags

Advertising

Page translated by automatic translation. See the original version.

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.