Tokyo Marui MWS based MK47 Mutant GBBR

https://cults3d.sitegames.net/en/3d-model/game/tm-mws-based-mk47-mutant-gbbr-v2-ar15-pattern

Merged with this post.

Includes STL file with improved resolution.

https://www.youtube.com/watch?v=9v7xUlr7erc&t=1s
https://www.youtube.com/watch?v=Q4kiwgKnGOc
https://www.youtube.com/watch?v=HG84GdAkhuM

This file can be used to create the GBBR shown in this video.

3D printed Tokyo Marui MWS based MK47

Genuine trigger boxes are compatible, but processing is required.
(Photo attached)

never tap new tabs where the screws will go (leave them to thread themselves while assembling them).

Lower receiver thread - standard AR 15 (you can't use MWS buffertube)

Need Tokyo Marui AKM/AKX magazine

I modeled it so that post-processing is not necessary as much as possible, but depending on the circumstances of the printer you have, there may be parts that require processing.

What you need :
Original buffer tube
MWS parts
[buffer spring + buffer, inner barrel , hop-up chamber, nozzle assembly (to transplant the interior to the nozzle for MK47), and GBBR AMK/AKX magazine.]

In addition, you will need a metal rod with a diameter of about 1.7mm to serve as the shaft of various springs and charging handles.

I worked with wire I bought at an RC supply store.

+

MWS trigger box bundle

AR15 buffer tube for real guns (not compatible with MWS buffer tube because it is made based on inch thread)
Castle Nut
end cap
Buffer retainer + Buffer retainer spring

Buffer + buffer spring for MWS

Metal rod with a diameter of 1.7 mm or less

M5-20 nut for grip fixation

Pivot pin/body pin detent + detent spring

For MWS
[Hop-up chamber
Hop-up rubber
Inner barrel
Nozzle bundle]

Additional tools or springs may be required.

Layer hight 0.16mm or less
Wall 6 or more
Infill 25%
Use tree , Overhang 25°