SWS with Cargo Platform & Panzerwerfer 42 Easy Print 1:16 Scale RC

Hello,
this is my design of a SWS / Schwerer Wehrmachtsschlepper

The package contains 3 versions:

SWS with Panzerwerfer
SWS ammunition Transporter (other Rooftop version)
SWS armored Carrier

Its an easy print model with a minimum amount of s.

I printed it on my ender 3 pro, You have to find the right position to print it. :-)

additional Parts to use a Tigertrack. You can use the new Torro tigertracks. They are made from plastic. See Pics in the Folder

Additional Parts to upgrade the old Supsension design. You need to print 10 Bushings and the swingarms.
(Folder Umbauteil alte Variante zu neuer)

You need to build the following hardware:

2x M4x70mm Hexscrews + Nuts for the Sprocketwheel
m3x20 Countersunkscrews (headdiameter roughly 6mm)
m3 Nuts
M3 Washers
1mm wire for hinges and tracks
M3x30 Allenhead or Hex screws for the Roadwheels and Idlerwheel.

4mmx0.5mm Brasstube for Bushings ( Wheels )
5mmx0,5mm Brasstube for the Gearbushings

M3x6mm Grubscrews for the Conegears

20mm Gearmotors (6V 300 rpm)
25mm Gearmotors (6v 300rpm)

unfortunaly i dindt have enough time to build a manual. but i took some pictures.

If you have any questions, fell free to ask me.

https://discord.gg/Q6xudUSz

Drivevideo: https://youtu.be/Xx2vjOIeBxs

Fort big parts:
5 lines
infill 10-20% gyroid
brim
where its needed
0.2 res

small parts:

3-5 lines
10-20 % infill gyroid
where it is needed
0,1 res