SR-1MP conversion kit for KWC pm makarov GBB

One of my big dreams coming true. I've been tinkering with this for about 1.5 years now and finally it's ready for release!

ASSEMBLY VIDEO:
https://youtu.be/l-yy-kZ84ow

I've modelled the latest version of the SR-1 pistol. The real life counterpart was meant as a replacement of the original makarov with a 9x21mm modernised, fixed barrel pistol.

You will need a KWC makarov (BLOWBACK version!!) and some standard components. Some of the components may be hard to find, but I can provide them for you, just let me know.

Suppressor is separate:

https://cults3d.sitegames.net/en/3d-model/game/sr-1mp-rail-mount-suppressor

I've been asked a couple times if I can adopt my PB conversion kit

https://cults3d.sitegames.net/en/3d-model/game/pb-pistol-conversion-kit-for-kwc-makarov

to WE makarov. That may be possible if I had access to that replica. In this case however, this won't ever be possible, because

THE MAG RELEASE IS MOVED TO THE CORRECT POSITION.

It's grabbing into the CO2 capsule cutout on the magazine which means this could only be adopted to CO2 makarov replicas, of which there is only one, the KWC.

The slide is bigger than the makarov slide in every dimensions. That means that the slide has thick walls which make it exceptionally suitable for 3D printing.

PRINTED IN GLASS FILLED NYLON, THE SLIDE IS THE SAME WEIGHT AS THE ORIGINAL KWC SLIDE.

I've increased the slide travel just a bit to add some more realism (9x21 means more slide travel than 9x18 mind you).

There is a separate frame and receiver. On the real steel, the receiver is made of steel. The one on the pictures is 3D printed anodized aluminum. I kept them separate for easier printing and so that you could paint one or use different material so that it replicates the color difference on the real steel. The receiver and the frame is connected by 3 M3 countersunk bolts and hexnuts, but the rear one is actually not necessary, just a backup.
That means you can assemble the fire control parts into the receiver and then move it into the frame.

The slidecatch lever should be bended a little bit (that IS reversible!) so that it fits in it's place. Let me know if you want an exposed slidecatch. If you put the mag in with proper force (nothing violent though), the slide will return to battery, without any action towards the slide catch so that's one more function I managed to add for the sake of realism.

The slidestopper and the takedown lever should be made from the strongest material you have access to. I can provide these parts printed in steel.

The colliding part on the slide can (and should) accept an M2x4mm grub screw which will serve as the point.

The thumb safety is not functional at the moment, just sitting on a spring to be pushed in and look pretty. I'm still working on a wire connection so that it works.

I am working on a trigger safety, that will be added to the VSR compatible hop-up unit I made:

https://cults3d.sitegames.net/en/3d-model/game/kwc-pm-makarov-tdc-vsr-compatible-hop-up-unit

Standard components:

Bolts

• 1 pc M2x4mm grub screw
• 2 pcs M3x10mm countersunk bolt
• 1 pc M3x14-16mm countersunk bolt
• 1 pc M3x18mm countersunk bolt
• 1 pc M2x25mm countersunk bolt
• 1 pc M3x10-20mm grub screw
• 1 pc M3 eye bolt
• 4 pcs M3 hexnut
• 1 pc M2 hexnut
• 1 pc M3 knurled thumb nut

Springs

• 2 pcs 5mm OD 10mm long compression springs (I recommend 0.6mm wire)
• 1 pc 6mm OD 5mm long compression spring (I recommend 0.6mm wire)

Some of these components are hard to find, me and I'll send you every standard component that is needed (for a small fee).