Skip to content

Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical

ezgif-2-a306886068.gif Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3387-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
Required-and-Recommended-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3388-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3393-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3394-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3395-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical
IMG_3397-copy.jpg Scully V2 - Shell Ejecting Toy Foam Dart Blaster - Fully Mechanical

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.2/5 (6 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
5 files (PDF and ZIP) Close
  • Instructions V6.pdf
  • Licence and Safety.pdf
  • Part 1 - Magazine and Trigger Mechanism - V2.zip
    • Trigger Mechanism/8. Hammer.stl
    • Trigger Mechanism/1. Trigger Mechanism Cover Left.stl
    • Trigger Mechanism/3. Trigger.stl
    • Trigger Mechanism/4. Disconnector.stl
    • Trigger Mechanism/6. Handle.stl
    • Trigger Mechanism/7. Trigger Guard.stl
    • Trigger Mechanism/2. Trigger Mechanism Cover Right.stl
    • Trigger Mechanism/5. Magazine Holder.stl
    • Magazine/3. Magazine Carrier.stl
    • Magazine/2. Magazine Top.stl
    • Magazine/7. Magazine Top Bolt (4x).stl
    • Magazine/1. Magazine Bottom Casing.stl
    • Magazine/4. Magazine Carrier Bolt (6x).stl
    • Magazine/6. Magazine Carrier Roller (2x).stl
    • Magazine/5. Magazine Carrier Pulley (6x)/IMPORTANT READ ME.pdf
    • Magazine/5. Magazine Carrier Pulley (6x)/5. Magazine Carrier Pulley (Office Rubber Bands) (6x).stl
    • Magazine/5. Magazine Carrier Pulley (6x)/5. Magazine Carrier Pulley (Wide Band) (6x).stl
  • Part 2 - Frame and Slide System - V4.zip
    • Orange Tip.stl
    • Slide/1. Slide.stl
    • Slide/4. Striker.stl
    • Slide/2. Ejector.stl
    • Frame/6. Top Frame Nuts (2x).stl
    • Frame/9. Stock Screw (Bottom).stl
    • Frame/7. Charging Handle.stl
    • Frame/10. Stock Screw (Top).stl
    • Frame/8. Stock.stl
    • Frame/11. Ejector Rod.stl
    • Frame/2. Mid Frame.stl
    • Frame/4. Frame Bolt (2x).stl
    • Frame/5. Frame Bolt Nut (2x).stl
    • Slide/3. Extractor/IMPORTANT READ ME.pdf
    • Slide/3. Extractor/3. Extractor (Reinforced).stl
    • Slide/3. Extractor/3. Extractor (Main).stl
    • Frame/3. Rear Frame/IMPORTANT READ ME.pdf
    • Frame/3. Rear Frame/3. Rear Frame (REINFORCED).stl
    • Frame/3. Rear Frame/3.Rear Frame (Classic).stl
    • Frame/1. Front Frame/IMPORTANT READ ME.pdf
    • Frame/1. Front Frame/1. Front Frame (LIMITED REINFORCEMENT) V2.stl
    • Frame/1. Front Frame/1. Front Frame (FULL REINFORCEMENT) V2.stl
    • Frame/1. Front Frame/1. Front Frame (Classic) V2.stl
  • Part 3 - SIghts and Cartridge - V2.zip
    • Cartridge/1. Main Cartridge Body.stl
    • Cartridge/3. Inner Platform.stl
    • Cartridge/7. Rubber Band Holder (2x).stl
    • Cartridge/8. Loader.stl
    • Cartridge/6. Dart Platform.stl
    • Cartridge/5. Shell Trigger.stl
    • Cartridge/0. Shell Trigger Tester.stl
    • Cartridge/2. Main Cartridge Cap.stl
    • Sights/5. Rear Sight Holding Bolt.stl
    • Sights/2. Rear Sight Plate.stl
    • Sights/4. Rear Sight Body Nut.stl
    • Sights/1. Rear Sight Body.stl
    • Sights/7. Front Sight Body Nut.stl
    • Sights/6. Front Sight Body.stl
    • Sights/3. Adjustment Screw.stl
    • Sights/8. Front Sight Holding Bolt.stl
    • Cartridge/4. Hook/IMPORTANT READ ME.pdf
    • Cartridge/4. Hook/4. Hook (Max Tolerance).stl
    • Cartridge/4. Hook/4. Hook (MAIN).stl

Learn more about the formats
Last update 2023-05-18 at 15:44
Publication date 2023-01-06 at 21:27
Design number 997046
Leblasto

Leblasto

Certified
Issue with this design? Report a problem.

19 comments

Add a comment

19 comments

ozgurgokhan
ozgurgokhan

What is the foam dart's size ?

Leblasto
Leblasto

Hey, its half length darts. If you dont have them you can take full length dart and then cut them to make it 36mm length

ozgurgokhan
ozgurgokhan

There is only nerf darts in Turkey and It's diameter is 1.2 cm . What is the diameter of darts?

Leblasto
Leblasto

The diameter should be 1.2cm. Length should be around 36mm. You can make this dart from normal size dart.

ozgurgokhan
ozgurgokhan

I'm an engineer and want to assembly for my son. I bought the stl files and instructions and looked them. What a great work. Liked it very much. Thanks for this work. worth every liras.

Leblasto
Leblasto

Cheers mate 🙂
Niconico
Niconico

Hi. Is this possible to be printed with A1 Mini?

Leblasto
Leblasto

Hey,
As per answer for Jester it is possible with splitting parts into two but would be significantly more difficult than for Jester. So if you are going splitting route definitely first try with Jester. And if that works then i would recommend going for Floki instead of Scully as the splitting for Scully might be more complex.

  • 1 like
cultsthrowaway45
cultsthrowaway45

Is the rail mount on top standard picatinny dimensions so that you can use optics from airsoft and such?

Leblasto
Leblasto

Hey! No, dimensions are bit different for printability.
ptannagh
ptannagh

are the infill peramiters in the photo slicing instructions (10%) the absolute needed amount or can i use 20% for a more durable model?

Leblasto
Leblasto

Hey, 20% should be fine. However keep in mind that making certain parts too heavy may cause problems so I recommend not overdoing it and sticking with the original instructions for these particular parts: cartridge, slide, magazine lifter.

  • 1 like
ptannagh
ptannagh

i followed the instructions in the end and chose not to risk it as thats the same conclussion i came to when thinking about it. thanks for the reply i have this printing right now :)
trueknightsoul
trueknightsoul

This! Right here! GENIUS!!! Thank you so much for taking the time to design this!

  • 1 like
JUANB
JUANB

eres un genio, gracias

  • 1 like
balmart3d
balmart3d

Felicitaciones por el diseño, quedo increible!!!! 👏👏👏👏👏👏👏🏆🥇

  • 1 like
fred0slam
fred0slam

Can it be printed with resin?!

Leblasto
Leblasto

I think resin is too weak
Mazer
Mazer

I'd LOVE for a more 40k looking version!

  • 1 like
stroudwillis
stroudwillis

I would recommend adding reinforcement on the rear frame tabs as well even tho they are short they do snap off easily. other then that good print.

Leblasto
Leblasto

Thanks for the ! Sure, will make an optional version with reinforcements 🙂

  • 1 like
Leblasto
Leblasto

Reinforced version has been added :)
TheLordOf3DPrintedEngines
TheLordOf3DPrintedEngines

There might be a lot of complicated mechanisms in that dart blaster! It's a lot like a NERF™ gun.
JPGraphics
JPGraphics

pretty nice :)

  • 1 like
Leblasto
Leblasto

Thank you :)

  • 1 like
YungMarzo
YungMarzo

How much fillament will i need?

Leblasto
Leblasto

I dont know exact numbers but it is around +-2kg

  • 1 like
Jb3rt_113
Jb3rt_113

Warhammer 40k fan sweats

  • 1 like
FreeBug
FreeBug

What is the estimated range with exercise bands?

Leblasto
Leblasto

I get 60-80 fps. Cant tell exact range but it is in par with stock foam dart blaster :)
comodin
comodin

esta muy buena, una bestia jajaja
Boby_Green
Boby_Green

This is crazy xD... Well done!

  • 1 like
Leblasto
Leblasto

Thank you :)
Leblasto
Leblasto

thanks :)
bigovereasy
bigovereasy

👏👏

  • 3 likes
Leblasto
Leblasto

Thanks! 😊

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.