Skip to content

OVLOV L260H

OVLOV-L260H.png OVLOV L260H
Ovlov-l260H3.jpg OVLOV L260H
Ovlov-l260H5.jpg OVLOV L260H
Ovlov-l260H2.jpg OVLOV L260H
Ovlov-l260H4.jpg OVLOV L260H
Ovlov-l260H1.jpg OVLOV L260H
Ovlov-l260H.jpg OVLOV L260H
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • OVLOV L260H electric version.zip
    • Backgroundmusic.url
    • Information filaments Ovlov L260H.xlsx
    • OVLOV L260H building manual.pdf
    • Parts list.pdf
    • READ THIS FIRST BEFORE DOING ANYTHING.txt
    • STL/Arms/Arm Left Inside.stl
    • STL/Arms/Arm left Outside.stl
    • STL/Arms/Arm Right Inside.stl
    • STL/Arms/Arm right Outside.stl
    • STL/Arms/Bigboom Left Ali.stl
    • STL/Arms/Bigboom Left Sicon.stl
    • STL/Arms/Bigboom Right Ali.stl
    • STL/Arms/Bigboom Right Sicon.stl
    • STL/Arms/Cover Middleleft.stl
    • STL/Arms/Cover Middleright.stl
    • STL/Arms/Middle.stl
    • STL/Arms/MiddleLeft.stl
    • STL/Arms/MiddleRight.stl
    • STL/Arms/Reinforced arms 1mm thickness.dxf
    • STL/Arms/SmallboomLeft.stl
    • STL/Arms/SmallBoomright.stl
    • STL/Arms/Wireholder arm.stl
    • STL/Back Chassis/Axleholdback.stl
    • STL/Back Chassis/AxleHoldFront.stl
    • STL/Back Chassis/BackAxle Back.stl
    • STL/Back Chassis/BackAxle Front.stl
    • STL/Back Chassis/Backleft.stl
    • STL/Back Chassis/Backright.stl
    • STL/Back Chassis/Bottom.stl
    • STL/Back Chassis/Box ladder left.stl
    • STL/Back Chassis/Box Ladder right.stl
    • STL/Back Chassis/Box Midleft.stl
    • STL/Back Chassis/Bumper turn.stl
    • STL/Back Chassis/Counterweight long.stl
    • STL/Back Chassis/Counterweightcover long.stl
    • STL/Back Chassis/Cover Step up back left & right.stl
    • STL/Back Chassis/Coverbox Midleft.stl
    • STL/Back Chassis/Cylinder oil leftside.stl
    • STL/Back Chassis/Fenderback left short fender.stl
    • STL/Back Chassis/Fenderback left short.stl
    • STL/Back Chassis/Fenderback right short fender.stl
    • STL/Back Chassis/Fenderback right short.stl
    • STL/Back Chassis/Hold cylinder oil leftside.stl
    • STL/Back Chassis/Ladder large.stl
    • STL/Back Chassis/Ladder left.stl
    • STL/Back Chassis/Ladder medium.stl
    • STL/Back Chassis/Ladder right.stl
    • STL/Back Chassis/Ladder small.stl
    • STL/Back Chassis/Ladder with .stl
    • STL/Back Chassis/Lit box ladder right.stl
    • STL/Back Chassis/Lit Box midleft.stl
    • STL/Back Chassis/MidBack.stl
    • STL/Back Chassis/MidBaseTurnengine.stl
    • STL/Back Chassis/MidBottom.stl
    • STL/Back Chassis/MidFront.stl
    • STL/Back Chassis/MidLeft.stl
    • STL/Back Chassis/Midright.stl
    • STL/Back Chassis/MidTop.stl
    • STL/Back Chassis/MidTopDetail.stl
    • STL/Back Chassis/MidTopsteerEngine.stl
    • STL/Back Chassis/Railing big leftside.stl
    • STL/Back Chassis/Railing big rightside.stl
    • STL/Back Chassis/Railing left fender.stl
    • STL/Back Chassis/Railing left stairs.stl
    • STL/Back Chassis/Railing right fender.stl
    • STL/Back Chassis/Railing right stairs.stl
    • STL/Back Chassis/Side ladder back.stl
    • STL/Back Chassis/Step up left back.stl
    • STL/Back Chassis/Step up right back.stl
    • STL/Back Chassis/Turning block.stl
    • STL/Back cover/Back cover top.stl
    • STL/Back cover/Cover Fenderback left.stl
    • STL/Back cover/Cover Fenderback right.stl
    • STL/Back cover/Coverback.stl
    • STL/Back cover/Coverdetail down left.stl
    • STL/Back cover/Coverdetail down right.stl
    • STL/Back cover/Coverdetail up left.stl
    • STL/Back cover/Coverdetail up right.stl
    • STL/Back cover/CoverLeft.stl
    • STL/Back cover/Coverlights.stl
    • STL/Back cover/CoverRight.stl
    • STL/Back cover/CoverTop.stl
    • STL/Back cover/Exhaust.stl
    • STL/Back cover/Fenderback left.stl
    • STL/Back cover/Fenderback right.stl
    • STL/Back cover/Filter base.stl
    • STL/Back cover/Filter top.stl
    • STL/Back cover/Mudflap Back.stl
    • STL/Back cover/VOLVO logo.stl
    • STL/Bucket/Quick coupler/Cover actuator left.stl
    • STL/Bucket/Quick coupler/Cover actuator right.stl
    • STL/Bucket/Quick coupler/Gear.stl
    • STL/Bucket/Quick coupler/Quick Coupler.stl
    • STL/Bucket/Quick coupler/shaft.stl
    • STL/Bucket/Rehandling bucket flat knife/Attachment flat knife rehandling bucket.stl
    • STL/Bucket/Rehandling bucket flat knife/Base rehandling bucket.stl
    • STL/Bucket/Rehandling bucket flat knife/Flat knife rehandling bucket.stl
    • STL/Bucket/Rehandling bucket flat knife/Rehandling bucket flat knife left side.stl
    • STL/Bucket/Rehandling bucket flat knife/Rehandling bucket flat knife right side.stl
    • STL/Bucket/Rehandling bucket flat knife/Rehandling bucket teeth left side.stl
    • STL/Bucket/Rehandling bucket flat knife/Rehandling bucket teeth right side.stl
    • STL/Bucket/Rehandling bucket with teeth/Base rehandling bucket.stl
    • STL/Bucket/Rehandling bucket with teeth/Knife teeth rehandling bucket.stl
    • STL/Bucket/Rehandling bucket with teeth/Rehandling bucket teeth left side.stl
    • STL/Bucket/Rehandling bucket with teeth/Rehandling bucket teeth right side.stl
    • STL/Bucket/Rehandling bucket with teeth/Teeth.stl
    • STL/Cabin/Arm chair left.stl
    • STL/Cabin/Arm chair right.stl
    • STL/Cabin/Bar right cabin.stl
    • STL/Cabin/Base cabin.stl
    • STL/Cabin/Ceiling cabin.stl
    • STL/Cabin/Chair.stl
    • STL/Cabin/Door.stl
    • STL/Cabin/Floor with pedals.stl
    • STL/Cabin/Front window wiper.stl
    • STL/Cabin/Frontcover cabin.stl
    • STL/Cabin/Handle door.stl
    • STL/Cabin/Hull steeringwheel.stl
    • STL/Cabin/Inner cabin frame.stl
    • STL/Cabin/Inner hull.stl
    • STL/Cabin/Mirror left.stl
    • STL/Cabin/Mirror right.stl
    • STL/Cabin/Outer hull.stl
    • STL/Cabin/Roof.stl
    • STL/Cabin/Steeringwheel.stl
    • STL/Cabin/Window cutouts/Window cutout back cabin.stl
    • STL/Cabin/Window cutouts/Window cutout door.stl
    • STL/Cabin/Window cutouts/Window cutout front left.stl
    • STL/Cabin/Window cutouts/Window cutout front right.stl
    • STL/Cabin/Window cutouts/Window cutout front.stl
    • STL/Cabin/Window cutouts/Window cutout right cabin.stl
    • STL/Front Chassis/Base oil reservoir front chassis.stl
    • STL/Front Chassis/Body actuator.stl
    • STL/Front Chassis/Bottom.stl
    • STL/Front Chassis/Centerback.stl
    • STL/Front Chassis/Detail hydraulic actuator left.stl
    • STL/Front Chassis/Detail hydraulic actuator right.stl
    • STL/Front Chassis/Detail side left.stl
    • STL/Front Chassis/Detail side right.stl
    • STL/Front Chassis/End actuatorbody.stl
    • STL/Front Chassis/Frontaxlecover.stl
    • STL/Front Chassis/Frontaxleleft.stl
    • STL/Front Chassis/Frontaxleright.stl
    • STL/Front Chassis/Frontfender cover left.stl
    • STL/Front Chassis/Frontfender cover right.stl
    • STL/Front Chassis/Frontfender left.stl
    • STL/Front Chassis/Frontfender right.stl
    • STL/Front Chassis/Glass oil reservoir front chassis.stl
    • STL/Front Chassis/I don't know what this is.stl
    • STL/Front Chassis/Left .stl
    • STL/Front Chassis/Liftt.stl
    • STL/Front Chassis/Liftpiece left.stl
    • STL/Front Chassis/Liftpiece right.stl
    • STL/Front Chassis/Lightsleftbase.stl
    • STL/Front Chassis/Lightsleftcover.stl
    • STL/Front Chassis/Lightsrightbase.stl
    • STL/Front Chassis/Lightsrightcover.stl
    • STL/Front Chassis/Locking pin front chassis long.stl
    • STL/Front Chassis/Locking pin front chassis short.stl
    • STL/Front Chassis/Mudflap.stl
    • STL/Front Chassis/Right .stl
    • STL/Front Chassis/Side left.stl
    • STL/Front Chassis/Side Right.stl
    • STL/Front Chassis/Spacer lifting system Left.stl
    • STL/Front Chassis/Top Ali actuator.stl
    • STL/Front Chassis/Top oil reservoir front chassis.stl
    • STL/Front Chassis/Top Sicon actuator.stl
    • STL/Wheels/Inner rim.stl
    • STL/Wheels/Outer rim.stl
    • STL/Wheels/Wheel weight.stl
    • VOLVO L260H brochure.pdf

Learn more about the formats
Last update 2025-03-26 at 12:18
Publication date 2025-01-31 at 21:25
Design number 2696350
Verbati3D

Verbati3D

Certified
Issue with this design? Report a problem.

Template info

3D model description

Build your own remote controlled wheel loader that is inspired by the most popular wheelloader Volvo has. Painting the model is not needed and you don't need a printer that can change filaments midprint. This model is fully electric and does not have hydraulics. It even comes with a quick coupler that allows you to easily switch between buckets.

See the first (short) testride on Youtube

Scale is 1/14

It has a step by step manual that will guide you through the building process. Once you have the files, there is a Facebook groupchat where I'll be personally available to answer any questions you have about the build.

Specifications:
Current weight: 14.4kg

Length 686.88 mm
Width 242 mm
Height 282.72 mm

the facebook group to ask questions and connect with fellow builders:
Facebook group Verbati3D

Here you'll find a list of items of what you'll need to build the loader:
Parts & screw list

What are you buying:
- STL files to 3d print the loader
- List of parts and screws you need to build the loader
- Building manual
- Electrical circuit diagram

What I plan on adding in the future:

  • More buckets
  • Conversion to hydraulic
  • Conversion to steel differential axles

Manufacturing settings

Minimum printbed: You need to be able to print the bucket which has a width of 230mm
Nozzle: 0.4mm
Layer height: 0.10-0.20 depending on how much detail you want on certain parts.
Material:
PETG "Melon Yellow" from Fillamentum 2,8kg
PETG Galaxy black from Prusa 2kg
Prusament PETG Urban Grey 0,5kg

Categories

Game

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.