Monumental Board Game Insert Retail Edition + Both Expansions (Lost Kingdoms, African Empires)

[Edit: Between the similar Production, Coins, Culture trays, one was mislabeled and one was missing. I apologize and thank Cheeznips for bringing this to my attention. I deleted the old ones and ed three new ones, labeled Production, Coins, and Culture.]

This insert was designed to hold the Retail Edition of Monumental and both expansions (Lost Kingdoms and African Empires). There is about one and a half cm of lid lift. The lid lift is well ed around the entire top.

WILL IT THE SHAKE TEST?:
Yes absolutely. But it’s heavy so you’ll get tired.

IT HAS LID LIFT – CAN I PLACE BOXES ON TOP OF IT?:
Yes. Everything is well ed. There might be some slack where the rulebooks go. The only thing I wouldn’t recommend placing on top is a box that is smaller and heavy.

DOES IT FIT SLEEVES?:
I did not design this insert to hold sleeved cards, but I believe you might be able to (See “OPTIONAL PRINTS” section below). I have provided a card box with no dividers. There is about 271mm of space in these boxes. If your sleeved cards stack up to less than 271mm, they will fit in these card boxes. To be clear, this is NOT a guarantee. You will have to do some measuring for yourself. Please comment if you do.

MISC NOTES:
The large-resource token trays on the bottom layer have a ridge to “lock” the card boxes in place against the wall. The one that goes into the corner has a shorter ridge. Make sure to place it accordingly.
The Market tray has 7 slots. One for each market. One for the Lost Kingdoms 4-gold markets. One for the African Empires trade token markets. This is so you don’t have to mix them in when playing without the expansions/larger player counts. If you would like, you can leave the 2 expansion wells empty, as all the wells are deep enough to hold all 7 tokens for each market.
Point the wonders tower towards the Cards to make sure they don’t spill out of the box.
There is extra space in the Building-Solo card box. This is available in case you want to split up any of your other decks, or for future promos, etc.

EDIT:
Minor change since images were taken - I added a rounded cut-out to the “ExpansionExtras” tray.

WHAT SHOULD I PRINT?:
Each item may be printed 1 time, unless the file name is clearly marked with a multiplier (ex 2x.FileName).
Specifically:
2 of the “2x.LargeResource” trays must be printed.
10 of the “10x.Player” must be printed.

Unless you are using the larger card trays, DO NOT PRINT:
OPTIONAL_SleevedWonders
OPTIONAL_SleevedBag
OPTIONAL_5x_SleevedCards

OPTIONAL PRINTS:
Again, I did not design this to hold sleeved cards. But if you measure your stack of sleeved cards to be 271mm or less, they will fit in the alternate Sleeved trays. To print this insert for sleeved cards…
Do NOT print:
Wonders
BagHolder
Cards1.BaseCiv
Cards2.Era
Cards3.LostCive.Monsters
Cards4.African
Cards5.Buildings.Solo

Instead, print
OPTIONAL_SleevedWonders
OPTIONAL_SleevedBag
OPTIONAL_5x_SleevedCards
(Print the last one 5 times)
Again, this is not a guarantee. And there are no dividers in this version of the card trays.

See final model photo for an example