Skip to content

ka-41 (tec 9 inspired)

ka-41-short-tec-9.jpg ka-41 (tec 9 inspired)
ka-41-short-2-tec-9.jpg ka-41 (tec 9 inspired)
ka-41-short-3-tec-9.jpg ka-41 (tec 9 inspired)
ka-41-short-4-tec-9.jpg ka-41 (tec 9 inspired)
ka-41-long-tec-9-long.jpg ka-41 (tec 9 inspired)
ka-41-long-2-tec-9-long.jpg ka-41 (tec 9 inspired)
reciver tube flat top.STL ka-41 (tec 9 inspired)
9x19 mm parabellum.STL ka-41 (tec 9 inspired)
barrel long shroud p1.STL ka-41 (tec 9 inspired)
short barrel shroud.STL ka-41 (tec 9 inspired)
short mag body.STL ka-41 (tec 9 inspired)
stock 2 p1.STL ka-41 (tec 9 inspired)
stock 2 p2.STL ka-41 (tec 9 inspired)
barrel long shroud p2.STL ka-41 (tec 9 inspired)
extended mag body.STL ka-41 (tec 9 inspired)
lower reciver.STL ka-41 (tec 9 inspired)
reciver tube flat top.STL ka-41 (tec 9 inspired)
stock 2 pic adapter.STL ka-41 (tec 9 inspired)
stock pic connector.STL ka-41 (tec 9 inspired)
9x19 mm hollow AP experement.STL ka-41 (tec 9 inspired)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
15 files (STL and ZIP) Close
  • 9x19 mm hollow AP experement.STL
  • 9x19 mm parabellum.STL
  • barrel long shroud p1.STL
  • barrel long shroud p2.STL
  • extended mag body.STL
  • ka-41.zip
    • accessories/bipod/bipod leg.STL
    • accessories/bipod/bipod mount.STL
    • accessories/bipod/bipod pin.STL
    • accessories/bipod/KA 41 Instructions bipod.pdf
    • accessories/flishlight mounts/flashlight mount special v2 p1.STL
    • accessories/flishlight mounts/flashlight mount special v2 p2.STL
    • accessories/flishlight mounts/flashlight mount zip tie p1.STL
    • accessories/flishlight mounts/flashlight mount zip tie p2.STL
    • accessories/flishlight mounts/KA 41 Instructions Flashlight mounts.pdf
    • accessories/grip/grip p1.STL
    • accessories/grip/grip p2.STL
    • accessories/grip/KA 41 Instructions grip.pdf
    • accessories/muzzle attachments/KA 41 Instructions muzzle device.pdf
    • accessories/muzzle attachments/muzzle device lock ring.STL
    • accessories/muzzle attachments/muzzle device.STL
    • accessories/muzzle attachments/suppersor lock ring.STL
    • accessories/muzzle attachments/suppersor simplified.STL
    • accessories/muzzle attachments/suppersor.STL
    • accessories/picitinny rails/13 long pic mount.STL
    • accessories/picitinny rails/5 long pic mount.STL
    • accessories/picitinny rails/9 long pic mount.STL
    • accessories/picitinny rails/KA 41 Instructions picatinny rails.pdf
    • accessories/picitinny rails/pic 13 long.STL
    • accessories/picitinny rails/pic 5 long fore grip.STL
    • accessories/picitinny rails/pic 5 long.STL
    • accessories/picitinny rails/pic 9 long.STL
    • accessories/picitinny rails/pic mount.STL
    • accessories/picitinny rails/short barrel pic 12 fore grip.STL
    • accessories/picitinny rails/short barrel pic 12 mount.STL
    • accessories/picitinny rails/short barrel pic 12.STL
    • accessories/sights/KA 41 Instructions sights.pdf
    • accessories/sights/red dot sight p1.STL
    • accessories/sights/red dot sight p2.STL
    • accessories/sights/scope mount p1.STL
    • accessories/sights/scope mount p2.STL
    • accessories/sights/scope mount p3.STL
    • accessories/sights/scope.STL
    • bolt group/bolt.STL
    • bolt group/extractor screw.STL
    • bolt group/extractor.STL
    • bolt group/hammer spring guide.STL
    • bolt group/KA 41 Instructions bolt group.pdf
    • bolt group/main spring back broad connector.STL
    • bolt group/main spring guide cap.STL
    • bolt group/main spring guide.STL
    • bolt group/spring backer.STL
    • bolt group/striker NO FIRING PIN.STL
    • bolt group/striker.STL
    • lower assembly/bolt catch.STL
    • lower assembly/ejector.STL
    • lower assembly/KA 41 Instructions lower receiver.pdf
    • lower assembly/lower reciver pins long.STL
    • lower assembly/lower reciver pins short.STL
    • lower assembly/lower reciver.STL
    • lower assembly/mag catch extended.STL
    • lower assembly/mag catch.STL
    • lower assembly/pistol grip.STL
    • lower assembly/safety left.STL
    • lower assembly/safety.STL
    • lower assembly/sear.STL
    • lower assembly/tigger.STL
    • lower assembly/trigger sear.STL
    • lower reciver.STL
    • mags/9x19 mm parabellum.STL
    • mags/extended mag body.STL
    • mags/extended mag spring.STL
    • mags/KA 41 Instructions mags.pdf
    • mags/mag base plate catch.STL
    • mags/mag base plate.STL
    • mags/mag follower.STL
    • mags/short mag body.STL
    • mags/short mag spring.STL
    • stocks/fixed stock/KA 41 Instructions fixed stock.pdf
    • stocks/fixed stock/stock 2 p1.STL
    • stocks/fixed stock/stock 2 p2.STL
    • stocks/fixed stock/stock 2 pic adapter.STL
    • stocks/fixed stock/stock pic connector.STL
    • stocks/folding stock/folding stock catch.STL
    • stocks/folding stock/folding stock detent pin.STL
    • stocks/folding stock/folding stock detent.STL
    • stocks/folding stock/folding stock p1.STL
    • stocks/folding stock/folding stock p2.STL
    • stocks/folding stock/folding stock pic adapter p1.STL
    • stocks/folding stock/folding stock pic adapter p2.STL
    • stocks/folding stock/folding stock pivit pin.STL
    • stocks/folding stock/KA 41 Instructions folding stock.pdf
    • upper receiver/barrel conector.STL
    • upper receiver/barrel long p1.STL
    • upper receiver/barrel long p2.STL
    • upper receiver/barrel long p3.STL
    • upper receiver/barrel long shroud p1.STL
    • upper receiver/barrel long shroud p2.STL
    • upper receiver/barrel muzzle.STL
    • upper receiver/barrel pin.STL
    • upper receiver/barrel short.STL
    • upper receiver/charging handle down swept.STL
    • upper receiver/charging handle level swept.STL
    • upper receiver/charging handle.STL
    • upper receiver/front sight lolipop.STL
    • upper receiver/front sight ring type.STL
    • upper receiver/KA 41 Instructions Upper receiver.pdf
    • upper receiver/rear sight.STL
    • upper receiver/reciver tube.STL
    • upper receiver/short barrel shroud.STL
  • lower reciver.STL
  • reciver tube flat top.STL
  • reciver tube flat top.STL
  • short barrel shroud.STL
  • short mag body.STL
  • stock 2 p1.STL
  • stock 2 p2.STL
  • stock 2 pic adapter.STL
  • stock pic connector.STL

Learn more about the formats
Last update 2025-03-15 at 05:20
Publication date 2024-09-30 at 18:28
Design number 2332883
6point16percent

6point16percent

Issue with this design? Report a problem.

3D printer file info

3D model description

This is a shell ejecting, trigger pulling, hammer dropping, NON-FIRING Tec 9 inspired model. Everything should be nice and easy to print and assemble, with as straight forward of a design as I could come up with. With this model you get more than just one configuration, you can make a long barrel version, or short barrel, folding stock or fixed stock, and some sights, grips and flashlight mounts to dress your model up with. But if the provided attachments aren't what you're looking for, all the mounting rails are standard picatinny so you can find what you like, mount it to the rail and customize it even more. This is just a TOY; the barrel is plugged and the firing pin cannot strike a round so there is no way to fire a live round. However it does look real so for everyone's safety don't take it in public or point it at anyone!

Some machine screws, nuts and springs are required, links to which are included in the instruction files.

14/3/2025 update: extractor made stronger and more reliable, added armor piercing hallow pointed sabot 9x19mm round (for fun), ALL parts are in the ZIP file but copies are available to spin in the 3d viewer

3D printing settings

Printed on a FDM printer, layer height 0.2mm, speed 55mm/s, infill 50%, temp 205 C.

https://www.youtube.com/watch?v=B6t3rdrpbzs

Categories

Toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.