Gothic Industrial Train

Ever wanted a train for your tabletop terrain layout? No, I don't mean those other itty-bitty trains out there. I mean a monstrous, about as true scale as you can get onto a printer train! This is it! With a style that fits perfectly within any grimdark universe, the Gothic Industrial Train is just at home in a hive or manufactorum as it is traveling across the open plains. The engine is powerful enough to haul immensely massive loads of materials, or war machines to any destination along its tracks, without fail. Need to transport a contingent of Sororitas armored tanks? Load them onto a reinforced flatbed! Got molten steel to move quickly from smelter furnace to manufactorum? Make use of the crucible-laden smelter car!

And this is only the beginning!

The Gothic Industrial Train is made to be the most impressive piece of terrain on the table. The engine alone is 40cm(~16in) in length when assembled! Sound intimidating? Worry not! Those tech priests have you covered! The engine and each car are broken down into easy-to-print (if not still massive) sections that are made to set flat on the build plate. No, to minimal s are needed, and from the build plate only. All overhangs are either curved or short enough that most printers can easily bridge them without any issue. To that end, there are very thin built-in s for connector peg sockets on the engine parts. Just grab them with a thin pair of pliers and rip them out, or break them with a screwdriver.

Print Instructions:

+FDM PRINTERS+
(Print the following sections of files for FDM. You may also print the more broken up RESIN PRINTER parts, which are hollow, if you prefer.)

++Engine++
- Engine Carriage - Front FDM v2
- Engine Carriage - Rear FDM v2
- Connector Peg - Engine Carriage
- Engine Front - Cab FDM v2
- Engine Front - Mid FDM
- Engine Front - Aft FDM v2
- Engine Rear FDM
- Connector Peg - Engine

++Flatbed Car++
- Flatbed Car - Front
- Flatbed Car - Rear
- Connector Peg - Flatbed Ribs
(This peg fits in between the ribs on the underside of the car. You can use 2-4 pegs, or none. preference!)

++Smelter Car++
- Smelter v2 - Body - Front
- Smelter v2 - Body - Mid
- Smelter v2 - Body - Rear
- Smelter v2 - Crucible 1
- Smelter v2 - Crucible 2
- Smelter v2 - Crucible 3
- Smelter v2 - Crucible Rack - Left
- Smelter v2 - Crucible Rack - Right
- Connector Peg - Smelter Ribs
(This peg fits in between the ribs on the underside of the car. You can use 2-4 pegs, or none. preference!)

++Gondola Car++
- Gondola Car - Base - Front
- Gondola Car - Base - Rear
- Gondola Container - Front
- Gondola Container - Rear
- Gondola Container - Connector x2
- Connector Peg - Flatbed Ribs x2

++enger Gondola Car++
- Gondola Car - Base - Front
- Gondola Car - Base - Rear
- enger Car - Body - Front
- enger Car - Body - Rear
- enger Car - Roof - Front
- enger Car - Roof - Rear
- enger Container - Connector Peg x5
- Connector Peg - Flatbed Ribs x2

++Tracks++
(These will be receiving an update. The included tracks are standard versions. Sci-fi versions will be added in a future update!)
- Track - Straight
- Track - Curved 90 Degree
(You can print and combine these however you want, and glue the tracks together, or use the following connectors:)
- Connector - Straight to Straight
- Connector - Straight to Curved
- Connector - Curved to Curved

+RESIN PRINTERS+
(These files for the Engine are for printers as small as 115x65x155mm and come pre-hollowed.)

++Engine++
- Engine - Cab - Part 1
- Engine - Cab - Part 2
- Engine - Cab - Part 3
- Engine - Cab - Part 4
- Engine Capacitor 1
- Engine Capacitor 2
- Engine Capacitor - Connector
- Engine Powerplant - Part 1
- Engine Powerplant - Part 2
- Engine Powerplant - Part 3
- Engine Powerplant - Deck
- Engine Powerplant - Pipes
- Engine Powerplant - Hatch
- Engine Powerplant -
- Engine Carriage - Front Trucks
- Engine Carriage - Fuel Tank
- Engine Carriage - Rear Trucks