FORD PRO MOD 454 ci SMALL BLOCK V8 Engine 1/8 TO 1/25 SCALE

FORD PRO MOD SMALL BLOCK (DART BLOCK) Nitro Injected V8 Engine 1/8 TO 1/25 SCALE

This is inspired by the Pro Stock engines of the 1990's and early 2000's that later found there way to Pro Mod cars as they get sold off. Sort off a custom build with Pro Stock parts from the 1990's ,with parts found lying around at swap meets and flee markets (combined with some new parts) etc. Well that's my fantasy of how the motor become into being, when deg the motor.

NITRO INJECTED, this Pro Mod Ford Small Block features a DART block and Racing Heads with the big HOLLEY DOMINATOR Carbs, High Rise inlet manifold, and BELT DRIVE CAMSHAFT, plus all the goodies to go fast. Bore and Stroked to a massive 454 ci, this engine will give e'm Big Blocks a run for there money. On Nitro this setup can make well over 2000 plus hp!

Designed to be printed in both FDM (1/12 Scale and above) and Resin (SLA), this model is a must-have for enthusiasts looking to add the best, most detailed Pro Mod high-performance engine replica to their collection.

You need to print about 10 STL's plus (depending on file selection, preassembled or not) to build the complete model. About 32 STL Files are included because you have options for FDM and Small or Large Scales etc. (Some STL Files included are options, for FDM or SLA). Make's you an impressive and fun to build model, that can be used for display by itself, or fitted to your Pro Mod / Hot Rod build. A completely assembled STL file is included as to be used as a assembly guide. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer. Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. An fully assembled STL file is included to serve as an assembly guide. (See Scale Guide in PRINTER SETTINGS Below)

Please note that this is an advanced project requiring the printing of separate parts, similar to a model kit. You'll also need suitable-sized electric wire for spark plug wiring and pipes (Pipe STL files included).

Copyright for the FORD PRO MOD SMALL BLOCK V8 Engine design is retained by BuildandClick.com. This model is intended for personal use and is not to be redistributed. Commercial use, including selling prints, requires a commercial license obtained by ing BuildandClick.com.

Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/18th Scale.
Prints good in RESIN, for some printers small details such as pipes have to be replaced by wire in 1/24 scale and such.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)