Crawler V306 Flatbed SCX6 - 1/6 RC body attachment

Requires a printer with minimum 256x256x256mm build volume (Bambu Lab X1 size).

Please note the V306 SCX6 cab in the pictures is sold separately. Wheels and tyres, 1:10 V306, 1:1 Jimny, are not included.

To pair up with the V306 SCX6 Cab, this flatbed at this scale actually becomes practical! Paired with the V306 SCX6 cab, and it is a truly massive beast. A size comparison between 1:10, and 1:1 are shown in the images.

Haul around an extra crawler rig on the trail! The internal dimensions of the bed is 334mm wide, and 498mm long, with the sideboards being 83mm tall. This means most standard 313mm crawlers will fit in this bed comfortably. Shown in the pictures is the 1/10 scale V306 for scale.

The mounts that are included with the flatbed also have usable cubby holes with hinged doors to store your trail spare parts and tools.

Battery change is by far the easiest of all our bodies (much easier than the stock SCX6’s body)! There’s a built-in battery access hatch on the bed that is secured using magnets. Simply push one side of the hatch down and it tilts and opens.

This body benefits from a slightly lower ride height for more scale stance and CG. The ride height setup shown in the pictures has the front and rear shock lower rod ends mounted in the axles’ lower mounting tabs, at the link mount’s level.
Please note that all inner fenders will have to be removed and replaced with the ones included in the files.

For best weight distribution across the entire truck, it is highly recommended to use the cab together with the flatbed.

Easy printability: the bed is split into 6 easy to print parts and is assembled with hardware to improve stiffness and durability.

The flatbed and cab should be paired with the SCX6’s stock wheelbase of 501mm, tyre to tyre outermost width of 378mm, and 7in to 7.5in diameter tyres.

SCX6 body mounts are also included, which bolt directly onto the chassis rails.

Some of the features and details included:

Super easy battery access
Big bed allows for most 1/0 rigs to fit comfortably
Cubby holes in body mount allows for storage
2x exhaust system
Custom designed inner fenders included, with 2 different versions for the rear
Fully functional light buckets

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:
View the link below to the assembly instructions
https://www.aheadrc.com/manual

FDM printing:
PLA+ or PETG filament
0.2-0.4mm layer heights
30-50% infill density
s are necessary