Building Bricks

Hello friend, today on my profile I wanted to bring buildings for children and not only, even for us adults, we can build something that we like.

The buildings are 31, all different, in the package you will find the high buildings, and the low ones, the angular roofs, or the round ones, also I made two models of bases, one 150mm and another 100mm.

The buildings come together perfectly, you can see it from the demo video that I left in the image section as gif, moreover, if you follow step by step the parameters that I will put you, always in the photo section, you can print perfectly these beautiful bricks, without the aid of the s, you will print only the brick, I also leave you a gif where you can see with your own eyes, like my printer, print the piece without s.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

Noozle 0.4
Temp. 205 / 55 "View Pictures"
Layer 0.10 / 0.15
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
No
Speed 50/60 mm/s