Big Tracked Grav Tank Squad

Big Tracked Grav Tank Squad (Display Model)

Pre-oriented and designed with FDM printer best practices in mind for easy printing and assembly.
Parts include magnet holes for optional magnetization: 5.5 mm × 2.25 mm (about 0.22 in × 0.09 in).

Features:
Tracked and Old-School Tank Versions
Various Tank Configurations

7 Cannon Variants
15 Sponson Variants
3 Top Weapon Systems

Dimensions:
Height: 100 mm (3.94 in)
Width: 105 mm (4.13 in)
Length: 165 mm (6.50 in)

Printing Tips:
Enable ironing for smoother surfaces, especially on the side track s.

When printing the side tracks, adjust the overhang angle (specific to your slicer) to avoid unnecessary s inside the track and wheel areas.

Inspiration:
Inspired by World War I Mark I tank tracks and the US Bradley armored personnel carrier.

This model was created entirely from scratch using 3D modeling software — no scans or replicas of copyrighted designs.

Printing Preferences:
-Use 3 wall perimeters.
-Set layer height to 0.15
-Use at least 25% lightning infill.
-To enhance bed adhesion, use brim.
-For improved surface quality on the top face, consider utilizing ironing.
-If you are familiar with your printer and slicer, adjust the angle to 65% to eliminate most of the unnecessary s.
-Optionally, printing outer walls before inner walls increases print quality.