Skip to content

Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE

BBC.002b.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.001.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.008.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.005.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.007.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.002.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.017.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.003.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.003b.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.004.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.006.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.008.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.009.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.010.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.012.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.013.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.015.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
BBC.016.jpg Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Big-Block-Chevy-Engine-with-ITBs-STLs.zip
    • 00 ASM/BIG BLOCK CHEVY ASM.stl
    • 00 ASM/BuildandClick Design Copyright.txt
    • 01Block/BBC RACE SUMP.stl
    • 01Block/BBC RACING CYLINDER BLOCK.stl
    • 01Block/Cam Drive Cover.stl
    • 01Block/Crank Front Piece.stl
    • 01Block/Flywheel.stl
    • 01Block/Harmonic Damper + Pulley.stl
    • 02 Heads/BBC Both Covers - CHEV RACING FINNED.stl
    • 02 Heads/BBC Both Covers - CHEVROLET RACING.stl
    • 02 Heads/BBC Both Covers - DART RACING.stl
    • 02 Heads/BBC RACE HEADS (2OFF).stl
    • 02 Heads/BBC RH EXHAUST.stl
    • 02 Heads/BBC-LH (Driver Side) EXHAUST.stl
    • 02 Heads/Breather v2.stl
    • 02 Heads/CLASSIC EXH BRANCH LH (Driver Side).stl
    • 02 Heads/CLASSIC EXH BRANCH RH.stl
    • 03 Inlet/BBC FUEL RAILS ASM.stl
    • 03 Inlet/FI INLET Manifold.stl
    • 03 Inlet/FI Throttle Body ONE PIECE.stl
    • 03 Inlet/FI Throttle Body SMALLER SCALES -ONE PIECE.stl
    • 03 Inlet/FI Throttle Body SMALLER SCALES.stl
    • 03 Inlet/FI Throttle Body.stl
    • 03 Inlet/FUEL FEED ASM.stl
    • 03 Inlet/FUEL RAIL BRACKETS.stl
    • 03 Inlet/FUEL RAIL LH.stl
    • 03 Inlet/FUEL RAIL RH.stl
    • 03 Inlet/FUEL RAILS.stl
    • 03 Inlet/Inlet Manifold Water Main A.stl
    • 03 Inlet/INLET Velocity Stack (8 OFF).stl
    • 03 Inlet/THROTTLE LINKS ASM.stl
    • 03 Inlet/THROTTLE LINKS SPLIT.stl
    • 04 Alternator/Alternator Belt - STRESS RELIEVED.stl
    • 04 Alternator/Alternator Belt.stl
    • 04 Alternator/Alternator for BIGGER SCALES.stl
    • 04 Alternator/Alternator for SMALL SCALES.stl
    • 04 Alternator/ALTERNATOR PLATE SPACER.stl
    • 04 Alternator/ALTERNATOR PLATE.stl
    • 04 Alternator/OPTION 2 - Alternator Body.stl
    • 04 Alternator/OPTION 2 - Alternator Pulley.stl
    • 99 Other/Dipstick.stl
    • 99 Other/Distributor MSD -3 piece.stl
    • 99 Other/Distributor MSD.stl
    • 99 Other/Electric Waterpump FOR ALTERNATOR PLATE.stl
    • 99 Other/Electric Waterpump NO ALTERNATOR PLATE.stl
    • 99 Other/Oil_Filter.stl
    • 99 Other/STARTER.stl

Learn more about the formats
Publication date 2024-03-06 at 13:11
Design number 1837180
buildandclick

buildandclick

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Big Block Chevy V8 motor with ITB's. 1/8 TO 1/25 SCALE

DISCOUNTED FOR A FEW DAYS ONLY!

Stunning Fuel injection setup atop a Big Block Chevy V8 with 8 itb's! This Mark 4 Big Block with Full Race Heads and Block is ready for the fastest quarter miles, or that very custom Hot Rod! Old School with a modern twist. Electronic Fuel injection Plus an Electric Water-pump to save more crank Horsepower. MSD Racing Distributor and more Racing Goodies.

CUSTOMIZE THE LOOK AS YOU WISH!
With Choice of 3 Custom Valve Covers Chevy Racing, Finned Chevy and Dart Racing Valve Covers.
Two Styles of Exhaust Manifolds. Twisty Racing Version PLUS Classic Racing Style Headers.

This model represent an Big Block Chevy V8 Engine as would be used for Oval Track Racing, Track Racing, Hot Rods and Drag Racing. Also will be fitting for some Bonneville racers.

About 45 STL Files are included, to make you a impressive and fun to build model, that can be used for display by itself, or fitted to your Hot Rod build. (Some STL Files included are options, making about 40 to print) A completely assembled STL file (and many Pic's) is included as to be used as a assembly guide. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer. Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. See the Scaling Guide Below.

This is an advanced project that require printing of separate parts, almost like a model kit. To use suitable sized electric wire for spark plug wiring.

Chevrolet Big Block V8 Engine with ITBs.
Copyright retained by BuildandClick.com, Intended for personal use, not to be redistributed. No Mods, Remixes or Digital Variants to be sold. To sell Prints you need to me for an commercial license.

3D printing settings

3D printer file information ( 160 MB Zip File)
Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/12th Scale.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)

Categories

RC vehicles

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.