Skip to content

AEAZSS01 - Starter Set

AEAZSS01-Cover.jpg AEAZSS01 - Starter Set
1.jpg AEAZSS01 - Starter Set
2.jpg AEAZSS01 - Starter Set
3.jpg AEAZSS01 - Starter Set
4.jpg AEAZSS01 - Starter Set
5.jpg AEAZSS01 - Starter Set
6.jpg AEAZSS01 - Starter Set
7.jpg AEAZSS01 - Starter Set
8.jpg AEAZSS01 - Starter Set
9.jpg AEAZSS01 - Starter Set
10.jpg AEAZSS01 - Starter Set
11.jpg AEAZSS01 - Starter Set
12.jpg AEAZSS01 - Starter Set
13.jpg AEAZSS01 - Starter Set
14.jpg AEAZSS01 - Starter Set
DRAGONBITE This product is licensed to use the Dye Teledu lt Ma eS CUCL Mg a ete Cr imeem tel) with Dragonlock™ terrain sets. AEAZSS01 - Starter Set
openlock.png AEAZSS01 - Starter Set
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • AEAZSS01-Aztlan Sewer Starter Set-03072025.zip
    • AEAZSS01 - Floor Grate.stl
    • AEAZSS01 - Low Sludge Fill.stl
    • AEAZSS01 - Portcullis Gate Bars.stl
    • AEAZSS01 - Portcullis Gate Cap.stl
    • AEAZSS01 - Scatter Full Column.stl
    • AEAZSS01 - Scatter Half Column.stl
    • AEAZSS01 - Sludge Spout Fill.stl
    • AEAZSS01 - Wall Grate.stl
    • AEAZSS01 - Wall Spout.stl
    • AEAZSS01 Ree.pdf
    • Dragonbite/AEAZSS01 - DB2x2 Center Column (Full).stl
    • Dragonbite/AEAZSS01 - DB2x2 Center Column (Half).stl
    • Dragonbite/AEAZSS01 - DB2x2 Corner.stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 1 (Plain).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 2 (Filled Grate).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 3 (Empty Grate).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 4 (Centered).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 5 (Tradition).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor 6 (New Tradition).stl
    • Dragonbite/AEAZSS01 - DB2x2 Floor Sludge.stl
    • Dragonbite/AEAZSS01 - DB2x2 Portcullis Gate Channel.stl
    • Dragonbite/AEAZSS01 - DB2x2 Portcullis Gate Wall.stl
    • Dragonbite/AEAZSS01 - DB2x2 Post (Torch).stl
    • Dragonbite/AEAZSS01 - DB2x2 Post.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Channel 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Channel 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Channel Corner 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Channel Corner 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Corner Edge 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Corner Edge 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge End 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge End 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Entry 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Entry 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Fourway 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Fourway 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Post 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Post 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Straight Edge 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Straight Edge 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Threeway 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Sludge Threeway 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Channel Spout).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Grate).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Ladder).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Stairs).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Stone Snake Ozomel).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall (Torch).stl
    • Dragonbite/AEAZSS01 - DB2x2 Wall.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 1.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 2.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 3.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 4.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 5.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 6.stl
    • Dragonbite/AEAZSS01 - DB2x2 Water 7.stl
    • Dragonbite/AEAZSS01 - DB4x4 Water 1.stl
    • Dragonbite/AEAZSS01 - DB4x4 Water 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Center Column (Full).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Center Column (Half).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Corner.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 1 (Plain).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 2 (Filled Grate).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 3 (Empty Grate).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 4 (Centered).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 5 (Tradition).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor 6 (New Tradition).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Floor Sludge.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Portcullis Gate Channel.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Portcullis Gate Wall.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Post (Torch).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Post.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Channel 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Channel 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Channel Corner 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Channel Corner 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Corner Edge 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Corner Edge 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge End 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge End 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Entry 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Entry 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Fourway 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Fourway 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Post 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Post 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Straight Edge 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Straight Edge 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Threeway 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Sludge Threeway 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Channel Spout).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Grate).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Ladder).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Stairs).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Stone Snake Ozomel).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall (Torch).stl
    • OpenLOCK/AEAZSS01 - OL2x2 Wall.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 1.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 2.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 3.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 4.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 5.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 6.stl
    • OpenLOCK/AEAZSS01 - OL2x2 Water 7.stl
    • OpenLOCK/AEAZSS01 - OL4x4 Water 1.stl
    • OpenLOCK/AEAZSS01 - OL4x4 Water 2.stl

Learn more about the formats
Last update 2025-03-07 at 20:40
Publication date 2021-05-21 at 18:46
Design number 432587
AetherStudios

AetherStudios

Issue with this design? Report a problem.

3D printer file info

3D model description

Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.

This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s personal favorite set and the idea of trying to do a set of sewers built by a race of snakefolk was a big goal for 2021. After his hard work on Pharaoh Fantasy Villages, Will asked Carl to take the helm for this next massive expansion. In one month together they produced over 200 models, including the 50+ included in this free set.

All of us at Aether thank Carl for breathing life into this project and helping us start the most dynamic set of sewer terrain ever.

3D printing settings

TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/s​: None

MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/s: None

Categories

Construction toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.