Skip to content

AEJUNK11 - Recycle Factory

aejunk11.jpg AEJUNK11 - Recycle Factory
1.jpg AEJUNK11 - Recycle Factory
2.jpg AEJUNK11 - Recycle Factory
3.jpg AEJUNK11 - Recycle Factory
4.jpg AEJUNK11 - Recycle Factory
5.jpg AEJUNK11 - Recycle Factory
6.jpg AEJUNK11 - Recycle Factory
7.jpg AEJUNK11 - Recycle Factory
8.jpg AEJUNK11 - Recycle Factory
resize-wukprji.jpg AEJUNK11 - Recycle Factory
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • AEJUNK11 - Recycle Factory - 07282023.zip
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Conveyer Left.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Conveyer Right.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Conveyer Straigt.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Coolant Tank (Large).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Coolant Tank (Small).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Pillar.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Pillars (Four).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Pillars (Three).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Pillars (Two Diagonal).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Pillars (Two Parallel).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corner Wall.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corridor Corner.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corridor Straight.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Corridor T-Junction.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Doorway (Closed, Bumpout).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Doorway (Closed, Inset).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Doorway (Open).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Floor Hatch.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Floor Pipes.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Floor Vent.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Corner (Closed).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Corner (Open).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Corridor (Closed).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Corridor (Open).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing End (Closed).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing End (Open).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Straight (Closed).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Railing Straight (Open).stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Riser 1.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Riser 2.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Stairs.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Straight Wall 1.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Straight Wall 2.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Straight Wall 3.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Straight Wall 4.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Trackway Corner.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Trackway Floor End.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Trackway Straight.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Trackway Wall End.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Wall Pillar Left.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x2 Wall Pillar Right.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x4 Conveyer End.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x4 Conveyer Start.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 2x4 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 4x4 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 4x6 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 6x6 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - 8x8 Floor.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - Clip-In Stairs.stl
    • AEJUNK11 -Recycle Factory/AEJUNK11 - Hover Minecart.stl
    • AEJUNK11 Ree.pdf

Learn more about the formats
Publication date 2024-08-23 at 21:23
Design number 2230222
AetherStudios

AetherStudios

Issue with this design? Report a problem.

3D printer file info

3D model description

Deep in the bowels of Junk Planet there is a rumble... things are moving and fast! The recycling factory is running and all the ... ahem is getting sorted, tagged, refurbished or... recycled.

Junk Planet 11 takes off of the surface and down to the belly of the junk world. The Recycle Factory is where all things are finally sorted, sifted, or slagged.

Multiple options are included for getting your junk from point A to B. As always, additional models for this set will be coming in future releases and immediate help is only a discord request away.

3D printing settings

TERRAIN RECOMMENDED PRINT SETTINGS

Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
s: None

Categories

RPG tabletop

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.