Skip to content

AECATA11 - Bone Barrows

AECATA11-1.jpg AECATA11 - Bone Barrows
1.jpg AECATA11 - Bone Barrows
2.jpg AECATA11 - Bone Barrows
3.jpg AECATA11 - Bone Barrows
4.jpg AECATA11 - Bone Barrows
5.jpg AECATA11 - Bone Barrows
6.jpg AECATA11 - Bone Barrows
7.jpg AECATA11 - Bone Barrows
8.jpg AECATA11 - Bone Barrows
OLDB.png AECATA11 - Bone Barrows
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • AECATA11-Bone Barrows-05292025.zip
    • AECATA11 - Door Left.stl
    • AECATA11 - Door Right.stl
    • AECATA11 - Scatter Book The Stitchitudes.stl
    • AECATA11 - Scatter Ossuary.stl
    • AECATA11 Ree.pdf
    • Dragonbite/AECATA11 - DB2x2 Corridor 1 (Plain).stl
    • Dragonbite/AECATA11 - DB2x2 Corridor 2 (Empty Alcoves).stl
    • Dragonbite/AECATA11 - DB2x2 Corridor 3 (Full Alcoves).stl
    • Dragonbite/AECATA11 - DB2x2 Corridor End 1.stl
    • Dragonbite/AECATA11 - DB2x2 Corridor End 2 (Bones).stl
    • Dragonbite/AECATA11 - DB2x2 Doorway.stl
    • Dragonbite/AECATA11 - DB2x2 Posts 1 (Two Parallel).stl
    • Dragonbite/AECATA11 - DB2x2 Posts 2 (Two Parallel).stl
    • Dragonbite/AECATA11 - DB2x2 Posts 3 (Two Diagonal).stl
    • Dragonbite/AECATA11 - DB2x2 Posts 4 (Two Diagonal).stl
    • Dragonbite/AECATA11 - DB2x2 Wall 1.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 2.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 3.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 4.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 5.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 6.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 7.stl
    • Dragonbite/AECATA11 - DB2x2 Wall 8.stl
    • Dragonbite/AECATA11 - DB2x4 Floor.stl
    • Dragonbite/AECATA11 - DB2x4 Ossuary.stl
    • Fingerling Miniatures/AECATA11 - Fingerling 1 (Resin ed).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 1 (Uned).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 1.lys
    • Fingerling Miniatures/AECATA11 - Fingerling 2 (Resin ed).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 2 (Uned).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 2.lys
    • Fingerling Miniatures/AECATA11 - Fingerling 3 (Resin ed).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 3 (Uned).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 3.lys
    • Fingerling Miniatures/AECATA11 - Fingerling 4 (Resin ed).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 4 (Uned).stl
    • Fingerling Miniatures/AECATA11 - Fingerling 4.lys
    • OpenLOCK/AECATA11 - OL2x2 Corridor 1 (Plain).stl
    • OpenLOCK/AECATA11 - OL2x2 Corridor 2 (Empty Alcoves).stl
    • OpenLOCK/AECATA11 - OL2x2 Corridor 3 (Full Alcoves).stl
    • OpenLOCK/AECATA11 - OL2x2 Corridor End 1.stl
    • OpenLOCK/AECATA11 - OL2x2 Corridor End 2.stl
    • OpenLOCK/AECATA11 - OL2x2 Doorway.stl
    • OpenLOCK/AECATA11 - OL2x2 Posts 1 (Two Parallel).stl
    • OpenLOCK/AECATA11 - OL2x2 Posts 2 (Two Parallel).stl
    • OpenLOCK/AECATA11 - OL2x2 Posts 3 (Two Diagonal).stl
    • OpenLOCK/AECATA11 - OL2x2 Posts 4 (Two Diagonal).stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 1.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 2.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 3.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 4.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 5.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 6.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 7.stl
    • OpenLOCK/AECATA11 - OL2x2 Wall 8.stl
    • OpenLOCK/AECATA11 - OL2x4 Floor.stl
    • OpenLOCK/AECATA11 - OL2x4 Ossuary.stl

Learn more about the formats
Publication date 2025-05-29 at 21:40
Design number 3033830
AetherStudios

AetherStudios

Issue with this design? Report a problem.

3D printer file info

3D model description

It is fair to say that we cut our teeth on catacombs at Aether Studios. Before even conjuring the idea of our own studio, Colin and Will , were besieged with requests for damned locations on the old FDG Forum.
This set is the third of four from our team in May 2025. If four catacomb sets seems like a lot in a month, I promise we didn’t plan it that way. Originally, this was the only set planned, but we found many opportunities to improve the previous sets along the way.
Nasos Maloudis sculpted this set, and all the wonderful bits you see in this set are due to his hard work and effort. This set is totally him, and it is a special letter of love to our patrons and tribers.

3D printing settings

TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/s​: None

Categories

RPG tabletop

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.