ADS conversion kit for AEG AK

A realy unique piece of hardware!

FNV workshop proudly presents the ADS amphibious assault rifle airsoft conversion kit with built-in grenade launcher for AK AEGs.

This is the AEG version.
GBBR version:
https://cults3d.sitegames.net/en/3d-model/game/ads-conversion-kit-for-we-well-ak-gbbr

ASSEMBLY VIDEO (It's for the GBBR version, for AEGs it's actually a lot simpler, the forend assembly is exactly the same)

https://www.youtube.com/watch?v=LL5SBaTWxwo

To my knowledge it should fit EVERY AEG AK that has a full length (rifle length) outer barrel. Of course if the gas block and front sight is not removable that's gonna cause a problem. LET ME KNOW if you have fitment issues, for example barrel cutouts not lining up and I will add files tailored to your needs! I included two stocks, one for folding stocks, and one for fixed stocks. The pictures show the GBBR version, the AEG version will have a large bump on the stock to house the motor cage, see my groza kit:
https://cults3d.sitegames.net/en/3d-model/game/ots-14-groza-kit-cyma-aeg

That means you don't need to cut and rearrange the gearbox.

The whole thing is VERY balanced with the launcher in the front.

You'll also need a Double Bell GP-25 (the grenade launcher is actually optional, I included a "plug" in case you don't want to use a built in grenade launcher).

You're going to need some modification to the launcher, such as cutting of the grip frame. I really tried to keep it intact, but it just wouldn't look good.

The charging handle is 3-position, left, top, right.

The TRIGGER MUST BE WIRED TO THE FRONT, I recommend using 2.5mm spring wire with two square bends. As opposed to the GBBR version of this kit, the wire is lead on the outer left side of the replica, just like with my groza kit. Fix the wire with an M4x12-20mm round cap head/pan head bolt to the left side of the receiver. The original trigger should be replaced by the gearboxtrigger included in the files. This is not absolutely necessary, you can wrap the wire around the original trigger and it will work.

You're gonna need a quick release ball pin, I recommend aliexpress/ebay/amazon as a source, included a picture to help you find it.

I recommend using the trigger guard as a sling swivel.

There is a picatinny rail on top.

I included a realistic compensator and a threaded supressor adapter.

I INCLUDED A STORAGE COMPARTMENT that goes into the pistol grip, and holds all the necessary allen keys and bunch of CR2032, two CR123A , or one 16850 battery.

This replica is modelled from the original version of the rifle. I will add the newest version with the slightly different forend and longer top rail as an additional paying content soon.

List of standard components:

Bolts
4pcs M4x5-6mm grub screw (GP-25 additional top cover, charging handle)
3pcs M4x4-6mm ball head grub screw (charging handle, fire selector, storace compartment)
1pc M4x12-16 grub screw (bolt carrier gas plug connection)
2pcs M4x20mm grub screw (top rail front mount, GP-25 trigger extension)
1pc M4x25mm grub screw (top rail rear mount)
3pcs M4x35 grub screw (forend front mount, GP-25 handguard mounting)
2pcs M4x10mm button head bolt (forend rear mount)
1pc M4x12-20mm round cap head/pan head bolt (trigger rod fixture to the forend)
1pc M6x20-22mm countersunk head bolt
2pcs M4 hexnut
1pc M6 hexnut

Washers
1pc M4x12mm aluminum spacer (GP25 trigger extension)

Pins
1pcs M3x16mm knurled pins (front sight, you should have these pins in the gas block of your replica)
1pc M5x10mm knurled pin (gas block)
1pc M5x35mm knurled pin (trigger)
1pc quick release ball lock pin (VCN114-6, grip length 10mm) (dust cover fixture)

Longest part is the dust cover, clocking in at 285mm length.