1/14 RC Drawbar Equipment Trailer

A 1/14 Equipment drawbar trailer to be pulled by tractors, trucks and dump trucks to haul goods and RC machinery.

UPDATE 10/03/2024 - Fixed front flag size.

Usable bed/deck dimensions of around 700mm by 195mm with the possibility to extend width to 225mm.
Trailer length not including A frame is around 780mm by 195mm.

I have tried to add as much detail as possible without compromising strength. It has
-Individual axle suspension with dummy airbags, the suspension can be adjusted to suit different carrying capacity weight by simply swapping springs.
-Electric raising and lowering ramps with realistic remote controlled actuators.
-Reinforced chassis with M10 threaded rod provides the trailer with the strength needed to haul your machines (tested at 12KG).
-3D printable wheels, axles and suspension (except springs).
-Extendable deck allows for wider machines to be transported with Wooden or 3D printed extension boards.
-With this, extendable flags to suit the width of the load
-Extension board storage in middle of deck for when not in use.
-Option to mount lights such as beacons.
-Parts have been oriented ready for printing.

The trailer has been designed to be able to be printed on a 220x220 mm print bed.

Full 43 step build manual included in PNG and PDF format.
List of all screws included and parts list included.

Your and will contribute towards keeping my coffee cup full so I can design new machinery so thank you.

If you would like to get in touch with any problems or to share your build as well as give ideas on how to improve this or future designs, please get in touch with me on Facebook.

https://www.facebook.com/T1ago.RC

ALL PARTS MUST HAVE 0 WARP

Suggested settings for all Structural parts:
4 walls (minimum)
20% infill (minimum),
1.2mm top and bottom layer thickness.