Skip to content

Stallion – High performance 3D printed twin-motor fixed-wing

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • STALLION FILES.zip
    • V1/DRILL/BOOM DRILL FUS.STL
    • V1/DRILL/BOOM DRILL TAIL.STL
    • V1/FUSELAGE/BATTERY PAD.STL
    • V1/FUSELAGE/BOOM FUS MOUNT.STL
    • V1/FUSELAGE/FRONT REINFORCEMENT.STL
    • V1/FUSELAGE/FUS 1 L.STL
    • V1/FUSELAGE/FUS 1 R.STL
    • V1/FUSELAGE/FUS 2 L.STL
    • V1/FUSELAGE/FUS 2 R.STL
    • V1/FUSELAGE/FUS 3 L.STL
    • V1/FUSELAGE/FUS 3 R.STL
    • V1/FUSELAGE/FUS 4 L.STL
    • V1/FUSELAGE/FUS 4 R.STL
    • V1/FUSELAGE/FUS 5 L.STL
    • V1/FUSELAGE/FUS 5 R.STL
    • V1/FUSELAGE/FUS ROOT L.STL
    • V1/FUSELAGE/FUS ROOT R.STL
    • V1/FUSELAGE/HATCH FRONT 1.STL
    • V1/FUSELAGE/HATCH FRONT 2.STL
    • V1/FUSELAGE/HATCH REAR 1.STL
    • V1/FUSELAGE/HATCH REAR 2.STL
    • V1/FUSELAGE/LOCK 1.STL
    • V1/FUSELAGE/LOCK 2.STL
    • V1/FUSELAGE/NOSE CLEAN.STL
    • V1/FUSELAGE/NOSE VTX COVER.STL
    • V1/FUSELAGE/NOSE.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/AILERON L.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/AILERON R .STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 1.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 2.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 3.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 4.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 5.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/RUDDER L.STL
    • V1/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/RUDDER R.STL
    • V1/STALLION MANUAL V1.pdf
    • V1/STEP/AILERON R.STEP
    • V1/STEP/FUS 5.STEP
    • V1/STEP/HATCH FRONT.STEP
    • V1/STEP/HATCH REAR.STEP
    • V1/STEP/NOSE CLEAN.STEP
    • V1/STEP/RUDDER R.STEP
    • V1/STEP/SERVO COVER.STEP
    • V1/STEP/TAIL.STEP
    • V1/TAIL/BOOM TAIL MOUNT.STL
    • V1/TAIL/RUDDER 1 L.STL
    • V1/TAIL/RUDDER 1 R.STL
    • V1/TAIL/RUDDER 2 L.STL
    • V1/TAIL/RUDDER 2 R.STL
    • V1/TAIL/TAIL 1 (LED).STL
    • V1/TAIL/TAIL 1 (NO LED).STL
    • V1/TAIL/TAIL 2 (LED).STL
    • V1/TAIL/TAIL 2 (NO LED).STL
    • V1/TAIL/TAIL 3 (LED).STL
    • V1/TAIL/TAIL 3 (NO LED).STL
    • V1/TAIL/V TAIL 1 L.STL
    • V1/TAIL/V TAIL 1 R.STL
    • V1/TAIL/V TAIL 2 L.STL
    • V1/TAIL/V TAIL 2 R.STL
    • V1/TAIL/V TAIL TIP L.STL
    • V1/TAIL/V TAIL TIP R.STL
    • V1/WINGS/AIL 1 L.STL
    • V1/WINGS/AIL 1 R.STL
    • V1/WINGS/AIL 2 L.STL
    • V1/WINGS/AIL 2 R.STL
    • V1/WINGS/MOTOR MOUNT F60.STL
    • V1/WINGS/MOTOR MOUNT F90.STL
    • V1/WINGS/SERVO COVER.STL
    • V1/WINGS/WING 1 L.STL
    • V1/WINGS/WING 1 R.STL
    • V1/WINGS/WING 2 L.STL
    • V1/WINGS/WING 2 R.STL
    • V1/WINGS/WING 3 L.STL
    • V1/WINGS/WING 3 R.STL
    • V1/WINGS/WING LED COVER L.STL
    • V1/WINGS/WING LED COVER R.STL
    • V1/WINGS/WING ROOT L.STL
    • V1/WINGS/WING ROOT R.STL
    • V1/WINGS/WINGLET L (NO LED).STL
    • V1/WINGS/WINGLET R (NO LED).STL
    • V1/WINGS/WINGLET L (LED).STL
    • V1/WINGS/WINGLET R (LED).STL
    • V2/FUSELAGE/BATTERY PAD.STL
    • V2/FUSELAGE/BOOM FUS MOUNT.STL
    • V2/FUSELAGE/FRONT REINFORCEMENT.STL
    • V2/FUSELAGE/FUS 1L.STL
    • V2/FUSELAGE/FUS 1R.STL
    • V2/FUSELAGE/FUS 2L.STL
    • V2/FUSELAGE/FUS 2R.STL
    • V2/FUSELAGE/FUS 3L.STL
    • V2/FUSELAGE/FUS 3R.STL
    • V2/FUSELAGE/FUS 4L.STL
    • V2/FUSELAGE/FUS 4R.STL
    • V2/FUSELAGE/FUS 5L.STL
    • V2/FUSELAGE/FUS 5R.STL
    • V2/FUSELAGE/FUS ROOT L.STL
    • V2/FUSELAGE/FUS ROOT R.STL
    • V2/FUSELAGE/HATCH FRONT 1.STL
    • V2/FUSELAGE/HATCH FRONT 2.STL
    • V2/FUSELAGE/HATCH REAR 1.STL
    • V2/FUSELAGE/HATCH REAR 2.STL
    • V2/FUSELAGE/LOCK 1.STL
    • V2/FUSELAGE/LOCK 2.STL
    • V2/FUSELAGE/LOCK SPRING.STL
    • V2/FUSELAGE/NOSE CLEAN.STL
    • V2/FUSELAGE/NOSE GIMBAL .STL
    • V2/FUSELAGE/NOSE TOP GIMBAL.STL
    • V2/FUSELAGE/NOSE TOP.STL
    • V2/FUSELAGE/NOSE.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/AILERON L.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/AILERON R .STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 1.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 2.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 3.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 4.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/FUS 5.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/RUDDER L.STL
    • V2/FUSELAGE + AILERONS + RUDDERS (NOT DIVIDED)/RUDDER R.STL
    • V2/STALLION SAMPLE WIRING DIAGRAM.pdf
    • V2/STEP/AILERON L.STEP
    • V2/STEP/FUS 4.STEP
    • V2/STEP/FUS 5.STEP
    • V2/STEP/HATCH FRONT.STEP
    • V2/STEP/HATCH REAR.STEP
    • V2/STEP/MOTOR MOUNT F60.STEP
    • V2/STEP/MOTOR MOUNT F90.STEP
    • V2/STEP/NOSE GIMBAL .STEP
    • V2/STEP/NOSE SOLID.STEP
    • V2/STEP/NOSE.STEP
    • V2/STEP/RUDDER L.STEP
    • V2/STEP/SERVO COVER L.STEP
    • V2/STEP/TAIL 1.STEP
    • V2/STEP/TAIL 2 .STEP
    • V2/STEP/TAIL 3.STEP
    • V2/STEP/V TAIL 1 R.STEP
    • V2/STEP/WING LED COVER SOLID.STEP
    • V2/TAIL/BOOM FUS INSERT.STL
    • V2/TAIL/BOOM KNOB.STL
    • V2/TAIL/BOOM TAIL INSERT.STL
    • V2/TAIL/RUDDER 1L.STL
    • V2/TAIL/RUDDER 1R.STL
    • V2/TAIL/RUDDER 2L.STL
    • V2/TAIL/RUDDER 2R.STL
    • V2/TAIL/TAIL 1.STL
    • V2/TAIL/TAIL 2 .STL
    • V2/TAIL/TAIL 3.STL
    • V2/TAIL/V TAIL 1 L.STL
    • V2/TAIL/V TAIL 1 R.STL
    • V2/TAIL/V TAIL 1L (inverded servo).STL
    • V2/TAIL/V TAIL 1R (inverded servo).STL
    • V2/TAIL/V TAIL 2 L.STL
    • V2/TAIL/V TAIL 2 R.STL
    • V2/TAIL/V TAIL TIP L.STL
    • V2/TAIL/V TAIL TIP R.STL
    • V2/WING/AILERON 1L.STL
    • V2/WING/AILERON 1R.STL
    • V2/WING/AILERON 2L.STL
    • V2/WING/AILERON 2R.STL
    • V2/WING/MOTOR MOUNT F60.STL
    • V2/WING/MOTOR MOUNT F90.STL
    • V2/WING/SERVO COVER L.STL
    • V2/WING/SERVO COVER R.STL
    • V2/WING/WING 1 L.STL
    • V2/WING/WING 1 R.STL
    • V2/WING/WING 2L.STL
    • V2/WING/WING 2R.STL
    • V2/WING/WING 3 L NO LED.STL
    • V2/WING/WING 3 L.STL
    • V2/WING/WING 3 R NO LED.STL
    • V2/WING/WING 3 R.STL
    • V2/WING/WING LED COVER L.STL
    • V2/WING/WING LED COVER R.STL
    • V2/WING/WING LOCK BASE.STL
    • V2/WING/WING LOCK FRONT L.STL
    • V2/WING/WING LOCK FRONT R.STL
    • V2/WING/WING LOCK REAR L.STL
    • V2/WING/WING LOCK REAR R.STL
    • V2/WING/WING ROOT L.STL
    • V2/WING/WING ROOT R.STL
    • V2/WING/WINGTIP L LED.STL
    • V2/WING/WINGTIP L NO LED.STL
    • V2/WING/WINGTIP R LED.STL
    • V2/WING/WINGTIP R NO LED.STL

Learn more about the formats
Last update 2025-05-07 at 00:46
Publication date 2024-01-30 at 12:37
Design number 1748914
Flightory

Flightory

Issue with this design? Report a problem.

3D printer file info

3D model description

Meet Stallion: 3D-printed fixed wing UAV. The aircraft is configured with 2 tractor motors, a single tail boom, and a V-Tail, emphasizing optimal performance and compact design. Its geometry undergoes careful design and optimization using CFD and real test flights. With modularity as a key focus, the airframe features a fully detachable nose, allowing adaptation to various payloads. The default setup is equipped for a standard 19x19mm FPV camera. All printing files are available in STL format, with select files in STEP, facilitating easy customization of components like mounts, antenna outputs, and sensors. Equipped with the recommended motors and battery, the Stallion achieves excellent performance coupled with low power consumption. Stable flight is attainable at just under 40% throttle. For extended flight times, a large 21Ah 4S6P Li-Ion battery is recommended. In a lightweight configuration, the aircraft can even operate with 3S batteries. The choice of motors and battery voltage is left to the and plays a crucial role in tailoring the aircraft's performance for specific purposes. The Stallion stands as a versatile and adaptable aerial platform, offering a balance of performance and customization for a range of applications. All parts can be printed on a 220x220mm print bed. However, for s with more capacious printers, larger fuselage segments are available, reducing the number of printed components.

3D printing settings

  • layer height: 0,25 mm
  • single wall 0,4mm thickness
  • 3% Gyroid infill.
  • Temperature: 235 degrees,
  • flow 60%
  • fan speed: 0%

Full Optimal LW-PLA Print Settings:
https://flightory.com/lw-pla-print-settings/

Categories

Robots

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.