Skip to content

SD Card & micro SD Card Box with USB Stick Holder

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (3 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
22 files (STL and ZIP) Close
  • COMPACT FLASH I CARDBOX SINGLE COVER.STL
  • COMPACT FLASH II CARDBOX SINGLE COVER.STL
  • COMPACTFLASH_I CARD DRAWER.STL
  • COMPACTFLASH_I CARD DRAWER.STL
  • COMPACTFLASH_II CARD DRAWER.STL
  • COMPACTFLASH_II CARD DRAWER.STL
  • LITTLE STUFF DIVIDER.STL
  • LITTLE STUFF DRAWER W. DIVIDER.STL
  • LITTLE STUFF DRAWER.STL
  • Micro SD Card Drawer.STL
  • Micro SD Card Drawer.STL
  • Parasolid X_B.zip
    • CompactFlash_II_Card_Drawer.x_b
    • CompactFlash_I_Card_Drawer.x_b
    • Compact_Flash_II_CardBox_Single_Cover.x_b
    • Compact_Flash_I_CardBox_Single_Cover.x_b
    • LITTLE STUFF DIVIDER.x_b
    • LITTLE STUFF DRAWER W. DIVIDER.x_b
    • LITTLE STUFF DRAWER.x_b
    • Micro_SD_Card_Drawer.x_b
    • SD_CardBox_Single_Cover.x_b
    • SD_CardBox_top.x_b
    • SD_CardBox_top2.x_b
    • SD_CARDBOX_TOP2STRONGER.x_b
    • SD_CardBox_top3.x_b
    • SD_CardBox_topStronger3.x_b
    • SD_Card_Drawer.x_b
    • STUFF DRAWER COVER.x_b
  • SD CARDBOX TOP2.STL
  • SD CARDBOX TOP2STRONGER.STL
  • SD CARDBOX TOP3.STL
  • SD CARDBOX TOPSTRONGER3.STL
  • SD Card Drawer.STL
  • SD Card Drawer.STL
  • SD CardBox Single Cover.STL
  • SD CardBox top.STL
  • SD CardBox top2stronger_Slottest.STL
  • STUFF DRAWER COVER.STL

Learn more about the formats
Last update 2025-02-06 at 11:01
Publication date 2021-03-08 at 02:54
?
Published to Thingiverse on: 2021-03-05 at 11:56
Design number 324933
findusdwarf

findusdwarf

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

This is a stackable box with drawers for SD and micro SD cards, optional with a USB stick holder as top plate.
You can stack together as many drawer modules as needed to create the complete box.
(you may find additional file formats and updated informations at thingiverse: https://www.thingiverse.com/thing:4784411

I have now redesigned the top part do reduce the material: (SD CARDBOX TOP2)

Additional:

I have added boxes and drawers for compact flash card type I and II
I do not have any of these card, so I could not test this. If you find any mistake please give me a note.

Additional 2:

I have added a modified version of the "SD CardBox top2": the "SD CardBox top2Stronger", with smaller slots for SD and micro SD cards to prevent floating of the cards.
The small part "SD CardBox top2stronger_Slottest" is a section of "SD CardBox top2stronger" to test if the cards fit.

Additional 3:

Today I have created the new "SD CardBox top3", which contains 3 additional slots for USB C sticks. It's also available as as stronger version "SD CardBox topStronger3" with a little smaller card slots.

Additional 4:

Changes/corrections (thanks to Hans Dampf "The HummingBird" for the hint):

All drawers have been given a small rise on the handle to make them easier to pull out.
Compact Flash_I Card Drawer: The recess has been corrected to 3.5mm depth- The Compact Flash I card is 3.3mm thick.

Additional 5:

  • Drawers for small parts ("Little stuff) added. One simple drawer and one drawer with variable dividers.
  • Base plate for 2 "towers" added. Two "SD CARD BOX" structures can be placed next to each other.
  • zipped parasolid files

3D printing settings

PLA, Infill 40%

Printing direction:

  • SD_Card_Drawer and Micro_SD_Card_Drawer flat on the bed, no

  • SD_CardBox_Single_Cover vertically standing on the back face, with material for the snap-in studs

  • SD CARDBOX TOP and SD CARDBOX TOP2... difficult:
    -- If your printer is calibrated accurately, place it on a side surface, This will create the smallest amount of material.
    -- If not, then place vertically on the back surface, in the same orientation as the covers.

The problem is the snap-ins, they do not fit if the printer is not exactly aligned.

Categories

Computers

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi ๐Ÿ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the siteโ€™s revenues are paid back to the platformโ€™s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.