Skip to content

Pluto V2.0 - A Fully 3D Printed ATV Rover Remixed From nahueltaibo's Rover Tracks v2 Design

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
12 files (STL) Close
  • Enclosure_A_Left_Side.stl
  • Enclosure_A_Right_Side.stl
  • Modified_MRT_Connector_V2.stl
  • Nah_Enclosure_C_v2.stl
  • Nah_MotorMount_A_v2.stl
  • Nah_MotorMount_B_v2.stl
  • Nah_Track_v1.stl
  • Nah_WheelDrive_v2.stl
  • Nah_WheelSlave_v2.stl
  • Rover_Base_v3.stl
  • Rover_Cover_V3.0.stl
  • Track_Grip_V2.stl

Learn more about the formats
Last update 2020-05-05 at 12:46
Publication date 2020-04-14 at 12:54
?
Published to Thingiverse on: 2020-04-11 at 12:17
Design number 134493
jidiparts

jidiparts

Issue with this design? Report a problem.

3D printer file info

3D model description

Hey!
Here is another Jidi Parts Thing!

This design was inspired by nahueltaibo's 'Rover Tracks v2' Design

I wanted to make an all terrain vehicle that could be totally 3d printed using only PLA filament. I succeeded in this creating what you see above in the photos: an ATV (All Terrain Vehicle) that is fully radio controlled and can run for over 5 hours on a 1000 milliamp 2-3s battery.

It has some pretty cool features:
- It can be flipped over and still drive without any problems (great for robot combat)
- Has plenty of room to add lots of upgrades - LED lights, a FPV system, a servo grabber, Vacuum Cleaning Attachment Anyone?
- Has super grippy tracks thanks to the TPU grips.

For how to print this design and how many of each file you need to print see the section bellow: 'Parts To Print'

What You'll Need For This Build

#####...Parts To Buy

If your just making the Chassis:

  1. Yellow Gear Motors x 2
  2. All the 3D Printed Parts (Please see the Parts To Print section bellow)

If you want to make the full build you will need:

  1. A RC transmitter I recommend to use the FlySky FS-i6 transmitter also known as the Turnigy TGY-i6
  2. A receiver that is compatible with your transmitter I am using the FlySky FS-iA6B Receiver also known as the Turnigy TGY iA6B
  3. 2 x 10A Car ESCs (forward/backward)
  4. A Mini Power Distribution Board
  5. As Well as the Yellow Gear Motors x 2

Here is a 'Transcript' of the video (Coming Soon...) demonstrating how to configure the Flysky FS-i6 Transmitter so you can drive Pluto with ease:

The Table Bellow shows the necessary changes to the Mix settings in the Functions Menu of your Transmitter:

Mix No. Mix is: Master Channel: Slave Channel: Positive Mix: Negative Mix: Offset:
1 ON Ch 2 Ch 4 100% 100% 0%
2 ON Ch 1 Ch 2 0% -100% 0%
3 ON Ch 1 Ch 4 100% 0% 0%

In some cases the your might need to change the Forward and reverse of one of the Chassis' motors. This can be done by swapping the wires around on one of the motors, or by changing some settings in the transmitter by going to the Functions Setup Menu in the transmitter, then selecting Reverse and then following the table bellow for the changes needed:

Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 Ch 6
Nor Rev Nor Nor Nor Nor

Nor = Normal, Rev = Reverse

Parts to Print
Part Name: No. to Be Printed Colour Material Infill nahueltaibo's Orignial Design?
Nah_WheelSlave_v2.stl 4 (2 FESOR) DM PLA 25 -50% Yes
Nah_WheelDrive_v2.stl 4 (2 FESOR) DM PLA 25 -50% Yes
Nah_Track_v1.stl 44 22 Blue, 22 Grey PLA 50% Yes
Nah_MotorMount_A_v2.stl 2 (1 FESOR) DM PLA 25 - 50% Yes
Nah_MotorMount_B_v2.stl 2 (1 FESOR) DM PLA 25 - 50% Yes
Nah_Enclosure_C_v2.stl 4 (2 FESOR) DM PLA 50% Yes
Enclosure_A_Left_Side.stl 1 for left side of rover Please see section bellow for colour info PLA 25 - 50% No
Enclosure_A_Right_Side.stl 1 for right side of rover Please see section bellow for colour info PLA 25 - 50% No
Track_Grip V2.stl 44 White TPU 50% No
Rover_Base v3.stl 1 Copper PLA 75% No
Rover_Cover V3.0.stl 1 Blue PLA 75% No
Modified_MRT_Connector V2.stl 2 (1 FESOR) Copper PLA 75% No

DM = Doesn't Matter
PLA = PolyLactic Acid
FESOR = For Each Side Of Rover

####Other Information
This is a great project to demonstrate how awesome 3d printing is and what is can be used for. If you have any problems with anything to do with this project please comment on this page. Please follow me or give me a tip so I can continue to design and create these things for you to print and make!
Thanks for checking our my work!

My Website: https://jidiparts.wordpress.com
My YouTube Channel: https://www.youtube.com/channel/UCyQlOYE4O-wP-TB5IszEQ

Vincent Hopf - Jidi Parts

Categories

Robots

Meta tags

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.