Pistol Grip Model 17 for Meta Quest 3 & Quest Pro Oculus

UPDATES:

//16.11.2024 // Added optional moving slide for Full grip version. The slide can push the controller joystick back, allowing to rack the slide in some applications. Here's a short youtube video showing assembly process:
https://www.youtube.com/watch?v=_M2gcxO-cgA
Any would be appreciated!

//09.10.2024 // Added alternative Slide version that can fit 2x AA batteries instead of AAA inside the barrel.

// 27.07.2024 // Fixes to the slide and grip for all models. Patched two holes in the grip that would show up in some slicers as pointed out by one of the s and tightened up tolerances for slide model so it secures the controller better and reduces the wiggle.

// 14.05.2024 // Few of my Etsy customers reported that the grips are also compatible with Quest Pro! I have no way of testing it myself but it seems like the fit is perfect and even though one of the tracking cameras is obscured, it doesn't affect the tracking negatively in any way. If you own Quest Pro and have tested it, I would greatly appreciate some !

3D Printed Pistol Grip for Meta Quest 3 controllers

Quick and easy assembly with minimal tools
Tools and hardware needed:
-Pliers
-1x spring from a pen
-Superglue or epoxy
-Some kind of a clamp or binder clip to hold the glued piece in place

Elevate your VR gaming experience with this 3D printed pistol grip attachment designed specifically for Meta Quest 3 controllers. Modeled after the dimensions of a real Series 17 pistol, this accessory adds a new level of immersion to your virtual adventures.

Key Features:
Realistic Feel: Mimicking the handling of a real Series 17 pistol, this pistol grip provides a natural holding angle for more comfortable aiming.

Secure Fit: The controller is effortlessly secured using a slide mechanism with a spring-loaded lock, reminiscent of a real Glock handgun. To remove the slide, simply press the release buttons on both sides and slide it out for quick and easy controller detachment.

Additional Functionality:
Removable Muzzle Compensator: The muzzle tip can be unscrewed, revealing a hidden compartment. Insert 2 AAA batteries into the barrel and secure them with the compensator. This allows to add some extra weight to further enhance realism.

Two Versions Included:
Full Version: Ideal for games like Pistol Whip, this version offers a more realistic look and allows for a higher, tighter, and more secure grip at the cost of compromising button access.

Button Access Version: Recommended for games requiring the use of analog sticks and buttons, providing a balance between realism and functionality.

Included files:
- Assembly instructions with pictures
- STL files for both versions (Full and Button Access) in Left and Right handed variants
- 3MF file for Bambu Slicer with custom s and print settings

Also available printed and assembled:

https://kriso3design.etsy.com

My filament of choice: eSun PLA+/Bambu PLA basic
0.2mm layer height
2 walls
10-15% infill (gyroid)
Tree s - only touching the build plate
//Recently I've been printing them with 3 walls and 5% gyroid infill with very good results. The slide fits in a bit tighter without any wobble and it saves few g of filament while maintaining structural integrity. 3 walls only recommended for finely tuned printers or if you think the slide is too loose