Skip to content

pi-HYDROPONICS - The DIY hydroponic system controller

pi-hydroponics.3.jpg pi-HYDROPONICS - The DIY hydroponic system controller
20231112_161538.jpg pi-HYDROPONICS - The DIY hydroponic system controller
20231116_233551.jpg pi-HYDROPONICS - The DIY hydroponic system controller
20231116_233615.jpg pi-HYDROPONICS - The DIY hydroponic system controller
20231117_000900.jpg pi-HYDROPONICS - The DIY hydroponic system controller
20231119_192240ddd.jpg pi-HYDROPONICS - The DIY hydroponic system controller
ap.png pi-HYDROPONICS - The DIY hydroponic system controller
Capture_enclosure.png pi-HYDROPONICS - The DIY hydroponic system controller
DASHBOARD.png pi-HYDROPONICS - The DIY hydroponic system controller
pcb.png pi-HYDROPONICS - The DIY hydroponic system controller
pcb_sensor.png pi-HYDROPONICS - The DIY hydroponic system controller
Settings.png pi-HYDROPONICS - The DIY hydroponic system controller
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
3 files (ZIP) Close
  • STL.zip
    • case_hydroponics.stl
    • cover_hydroponics.stl
  • Schematic_gerber.zip
    • BOM_pi-hydroponics_2023-11-27.csv
    • pi-hydroponics_gerber.rar
    • Schematic_pi-hydroponics_2023-12-02.pdf
    • Schematic_pi-hydroponics_V1.pdf
  • pi-hidroponics_20231202.zip
    • pi-hidroponics_20231202.img

Learn more about the formats
Publication date 2023-12-02 at 23:01
Design number 1618132
andiserax

andiserax

Issue with this design? Report a problem.

3D printer file info

3D model description

pi-Hydroponics The DIY hydroponic controller

Compatible with:
- Raspberry Pi Zero W
- Raspberry Pi2 Zero W
- Raspberry Pi 2
- Raspberry Pi 3b+
- Raspberry Pi 4

pi-Hydroponics makes your hydroponics system management easy and professional.

Key features:
- Compact design
- Affordable - about 100$ (ten time less than professional hydroponic system)
- Professional and reliable pH and Temperature readings (electrical isolated probes)
- up to 12 power outlets
- Modern dashboard (also for mobile and tablet)
- Push notifications
- Remote control
- Can work on existing wifi network or in AP mode.
- Import / export system telemetry
- On board Buzzer alert
- Configurable alerts (water level, pH, temperature etc)
- Outlets scheduler
- Power consumption monitor (for enabled tasmota hardware)
- OLED display
- Temperature controlled internal super silent fan
- pH probe calibration tool
- Electrical conductivity measurement
- Smart nutrient doser (optional)
- CO2 Carbon dioxide measurement (optional)

You can easily control up 12 power outlets, monitor power usage, monitor temperature and pH measurements and control the water level using no- sensors.

Then you can control remotely your system using an elegant and powerful dashboard and receive push notification on your mobile if something is wrong on your tank.

You can also import / export your system telemetry.

pi-Hydroponics is compact and easy to make.

You won't have any electrical noise coming from your system system (like pumps, led and heater/cooler) since the sensors are electrically isolated).

The controller is composed by:

  • Raspberry Pi Zero W or Raspberry Pi 3b+ or Raspberry Pi 4 + Raspberry computer module
  • Aquarium Controller
  • Up to 12 power outlets (4 x 3 modules)
  • Ph Probe sensor
  • Temperature sensor
  • Ambient temperature / umidity sensor
  • Electrical conductivity (EC) measurement
  • up x 3 Co2 Carbone dioxide measurement (optional)
  • 2 x Water Level sensors

Visit OCEANBERRY to learn more!

What's in the package?

  • Schematics
  • PCB Gerber files for Controller
  • Raspberry OS Image
  • Controller enclosure 3D Step Model and STL
  • Doser complete project (schematics, stl, BOM etc)
  • Co2 sensor complete project and instructions

This is not a good project for beginner electronics hobbyists. I would rate it as intermediate to advanced. See the skills list below for a better idea of what is involved.

Recommended Skills List:
- Soldering - All components are either tenth inch spacing through-hole or SMD components readily available as modules with tenth inch headers, but you will need to solder.
- Construction and wiring of electronics
- You'll have to make a chassis somehow, either by using my STL files and a 3D printer
- You'll need to get printed circuit boards
- Familiarity with electronics

Categories

Electronics

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.