Game Daddy: A Better Back For Your Pocket

Introducing the GAME DADDY v.1.0.

From the minds of Cupojoe252 and JustThatJay

A custom back and shoulder buttons for the Analogue Pocket.

Features:
- An enlarged cartridge slot for a stable cartridge connection.
- Center pivoting shoulder buttons for added comfort and reliable control.
- Seamless edges along the side and bottom of the console.
- A more reliable fitting multiplayer port.

Disclaimer: This mod is not compatible with the Analogue Pocket cartridge adapters. Only Game Boy, Game Boy Color, and Game Boy Advance games are compatible with the Game Daddy. Assemble and use at your own risk! The makers of the Game Daddy are not responsible for any damage done to your Analogue Pocket.

Link to the YouTube Video:
https://www.youtube.com/watch?v=JD9NG-6XIPo

Installation:
Tools Required: T6 screw driver, scissors, and a piece of cardstock paper.
- Remove original back plate from the Analogue Pocket using a T6 screw driver.
- Cut a 1cm x 0.5cm piece of cardstock paper. This paper piece needs to be inserted in-between the buttons as this acts as a shock absorber for the buttons.
- Insert the tips of the buttons into the holes first, the tail ends of the buttons should be sticking upwards out of the frame.
- Add the small piece of cardstock paper in-between the two tail ends, and firmly press the tail ends into the frame.
- The tail ends should firmly press against each other with the paper held in-between
At this point everything should be assembled, and the buttons should have a bouncy press to them.
- Finally, use the original screws to install the Game Daddy onto your Analogue Pocket.

No 3D printer? No problem

Instructions on how to order/print your own Game Daddy.

1. Go to craftcloud3d.com

2. 3 print files, STLs or OBJs. (GD_Button_L.obj/GD_Button_R.obj/GD_Frame.obj). Make sure to as Centimeters for the file unit.

You may need to scale each model to 10% on craftcloud3d, you should get these dimensions:
Exact dimensions should be:
GD_Frame: 8.85cm x 11.21cm x 1.83cm
GD_Buttons: 4.42cm x 1.41cm x 1.66cm

1. Select a Material: SLS Nylon PA12

2. Select a Finish: Shot Peened

3. Select a Color: I recommend using solid white or solid black. These "solid" options use white or black plastic as opposed to white plastic that is dyed.

Printing at home:
-If you do decide to print your Game Daddy at home, here are a couple of recommended tips and settings:

-Highly recommend printing at 100% infill as some areas are thin.
-s will be required depending on the angle you’re printing this. The screw holes are the trickiest part to have print correctly so keep that in mind.
-The frame and buttons should be printed separately.
-PLA works just fine, but we recommend our craftcloud3d guide for smoother results.