Replacement shell for Super Nintendo and Super Famicom (PAL/NTSC), Super Mario, Zelda, Pokemon, case, housing

Replacement shell for Super Nintendo and Super Famicom (PAL/NTSC)

---

A new shell for the best gameing console in the world.

Many Super Nintendos are now in poor condition, so I measured all Super Nintendo motherboards and designed a new shell.

The shell is very easy to print, needs no s, and has color separated parts.

The design is a bit more modern, but it also have elements of the original design.

PAL and NTSC cartridges fit into the cartridge slot.

The open design actually improves cooling compared to the original case.

The parts are simply glued together. The motherboard, the switch, and the two case parts can be assembled using the original screws. It is also possible to attach the original rubber feet to the printed feet.

The includes all the parts you need and prepared 3MF files. All upper visible surfaces lie on the print bed. If you use a textured print bed, you'll get a very nice surface. You can also add a matching fuzzy skin to the exterior. This is already included in the 3mf files.

The following parts are required:

Super Nintendo motherboard PAL or NTSC (The very first Japanese version with a separate sound module will not fit. -> Coming soon)

Controller port (the US port will not fit because it is wider)

Original screws from the old Super Nintendo (or equivalent)

Original LED cover/insert

Original rubber feet (optional)

Have fun!!!

Wall thickness: 0.8 - 1.2 mm
Layer height: 0.08 - 0.2mm
Infill: 0 - 15 %
Layer base: 5 - 7
Top layers: 5 - 7
No s