Skip to content

Temple Guard Concept Art Armor Sets - 3D Print Files

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Temple Guard Concept Armor Sets V1 - Galactic Armory.zip
    • Set 1/Baldric.stl
    • Set 1/Buckle.stl
    • Set 1/Calf Left 1.stl
    • Set 1/Calf Left 2.stl
    • Set 1/Calf Right 1.stl
    • Set 1/Calf Right 2.stl
    • Set 1/Chest Plate.stl
    • Set 1/Forearm Left Plate 1.stl
    • Set 1/Forearm Left Plate 2.stl
    • Set 1/Forearm Left Plate 3.stl
    • Set 1/Forearm Left Underside.stl
    • Set 1/Forearm Right Plate 1.stl
    • Set 1/Forearm Right Plate 2.stl
    • Set 1/Forearm Right Plate 3.stl
    • Set 1/Forearm Right Underside.stl
    • Set 1/Hip Plate Left.stl
    • Set 1/Hip Plate Right.stl
    • Set 1/Knee Left.stl
    • Set 1/Knee Right.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Baldric 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 1 - 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Left 2 - 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 1 - 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Calf Right 2 - 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Chest Plate 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Underside 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Underside 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Underside 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Left Underside 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Underside 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Underside 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Underside 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Forearm Right Underside 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Left 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 5.stl
    • Set 1/Pre-Cut for Smaller Printers/Hip Plate Right 6.stl
    • Set 1/Pre-Cut for Smaller Printers/Knee Left 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Knee Left 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Knee Right 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Knee Right 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Set 1 Mask 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Set 1 Mask 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Set 1 Mask 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Set 1 Mask 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 2 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 2 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 3 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 3 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 3 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Left 3 - 4.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 1 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 1 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 2 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 2 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 3 - 1.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 3 - 2.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 3 - 3.stl
    • Set 1/Pre-Cut for Smaller Printers/Shoulder Right 3 - 4.stl
    • Set 1/Set 1 Mask.stl
    • Set 1/Shoulder Left 1.stl
    • Set 1/Shoulder Left 2.stl
    • Set 1/Shoulder Left 3.stl
    • Set 1/Shoulder Right 1.stl
    • Set 1/Shoulder Right 2.stl
    • Set 1/Shoulder Right 3.stl
    • Set 2/Buckle.stl
    • Set 2/Calf Left 1.stl
    • Set 2/Calf Left 2.stl
    • Set 2/Calf Right 1.stl
    • Set 2/Calf Right 2.stl
    • Set 2/Chest - Combined.stl
    • Set 2/Chest 1.stl
    • Set 2/Chest 2.stl
    • Set 2/Forearm Left Plate 1.stl
    • Set 2/Forearm Left Plate 2.stl
    • Set 2/Forearm Left Plate 3.stl
    • Set 2/Forearm Left Plate 4.stl
    • Set 2/Forearm Left Underside.stl
    • Set 2/Forearm Right Plate 1.stl
    • Set 2/Forearm Right Plate 2.stl
    • Set 2/Forearm Right Plate 3.stl
    • Set 2/Forearm Right Plate 4.stl
    • Set 2/Forearm Right Underside.stl
    • Set 2/Hip Plate Left.stl
    • Set 2/Hip Plate Right.stl
    • Set 2/Knee Left.stl
    • Set 2/Knee Right.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 1 - 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Left 2 - 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 1 - 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Calf Right 2 - 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 10.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 11.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 12.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 7.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 8.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest - Combined 9.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 10.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 11.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 12.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 7.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 8.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 1 - 9.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Chest 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Underside 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Underside 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Underside 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Left Underside 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 3 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Plate 3 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Underside 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Underside 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Underside 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Forearm Right Underside 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Left 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 5.stl
    • Set 2/Pre-Cut for Smaller Printers/Hip Plate Right 6.stl
    • Set 2/Pre-Cut for Smaller Printers/Knee Left 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Knee Left 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Knee Right 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Knee Right 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Set 2 Mask 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Set 2 Mask 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Set 2 Mask 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Set 2 Mask 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Left 2 - 4.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 1 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 1 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 2 - 1.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 2 - 2.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 2 - 3.stl
    • Set 2/Pre-Cut for Smaller Printers/Shoulder Right 2 - 4.stl
    • Set 2/Set 2 Mask.stl
    • Set 2/Shoulder Left 1.stl
    • Set 2/Shoulder Left 2.stl
    • Set 2/Shoulder Right 1.stl
    • Set 2/Shoulder Right 2.stl
    • Set 3/Buckle.stl
    • Set 3/Calf Left 1.stl
    • Set 3/Calf Left 2.stl
    • Set 3/Calf Right 1.stl
    • Set 3/Calf Right 2.stl
    • Set 3/Chest - Combined.stl
    • Set 3/Chest 1.stl
    • Set 3/Chest 2.stl
    • Set 3/Forearm Left Plate 1.stl
    • Set 3/Forearm Left Plate 2.stl
    • Set 3/Forearm Left Plate 3.stl
    • Set 3/Forearm Left Plate 4.stl
    • Set 3/Forearm Left Underside.stl
    • Set 3/Forearm Right Plate 1.stl
    • Set 3/Forearm Right Plate 2.stl
    • Set 3/Forearm Right Plate 3.stl
    • Set 3/Forearm Right Plate 4.stl
    • Set 3/Forearm Right Underside.stl
    • Set 3/Hip Plate Left.stl
    • Set 3/Hip Plate Right.stl
    • Set 3/Knee Left.stl
    • Set 3/Knee Right.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 1 - 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Left 2 - 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 1 - 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Calf Right 2 - 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 10.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 11.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 12.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 7.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 8.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest - Combined 9.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 10.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 7.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 8.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 1 - 9.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Chest 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Underside 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Underside 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Underside 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Left Underside 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 3 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Plate 3 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Underside 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Underside 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Underside 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Forearm Right Underside 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Left 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 5.stl
    • Set 3/Pre-Cut for Smaller Printers/Hip Plate Right 6.stl
    • Set 3/Pre-Cut for Smaller Printers/Knee Left 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Knee Left 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Knee Right 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Knee Right 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Set 3 Mask 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Set 3 Mask 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Set 3 Mask 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Set 3 Mask 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 1 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 1 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Left 2 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 1 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 1 - 2.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 1 - 3.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 1 - 4.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 2 - 1.stl
    • Set 3/Pre-Cut for Smaller Printers/Shoulder Right 2 - 2.stl
    • Set 3/Set 3 Mask.stl
    • Set 3/Shoulder Left 1.stl
    • Set 3/Shoulder Left 2.stl
    • Set 3/Shoulder Right 1.stl
    • Set 3/Shoulder Right 2.stl
    • Set 4/Buckle.stl
    • Set 4/Calf Left 1.stl
    • Set 4/Calf Left 2.stl
    • Set 4/Calf Right 1.stl
    • Set 4/Calf Right 2.stl
    • Set 4/Chest.stl
    • Set 4/Forearm Left Plate 1.stl
    • Set 4/Forearm Left Plate 2.stl
    • Set 4/Forearm Left Plate 3.stl
    • Set 4/Forearm Left Underside.stl
    • Set 4/Forearm Right Plate 1.stl
    • Set 4/Forearm Right Plate 2.stl
    • Set 4/Forearm Right Plate 3.stl
    • Set 4/Forearm Right Underside.stl
    • Set 4/Hip Plate Left.stl
    • Set 4/Hip Plate Right.stl
    • Set 4/Knee Left.stl
    • Set 4/Knee Right.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 1 - 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Left 2 - 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 1 - 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Calf Right 2 - 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 10.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 7.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 8.stl
    • Set 4/Pre-Cut for Smaller Printers/Chest 9.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Underside 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Underside 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Underside 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Left Underside 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Underside 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Underside 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Underside 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Forearm Right Underside 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Left 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 5.stl
    • Set 4/Pre-Cut for Smaller Printers/Hip Plate Right 6.stl
    • Set 4/Pre-Cut for Smaller Printers/Knee Left 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Knee Left 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Knee Right 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Knee Right 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Set 4 Mask 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Set 4 Mask 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Set 4 Mask 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Set 4 Mask 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 1 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 1 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 2 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Left 2 - 4.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 1 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 1 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 2 - 1.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 2 - 2.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 2 - 3.stl
    • Set 4/Pre-Cut for Smaller Printers/Shoulder Right 2 - 4.stl
    • Set 4/Set 4 Mask.stl
    • Set 4/Shoulder Left 1.stl
    • Set 4/Shoulder Left 2.stl
    • Set 4/Shoulder Right 1.stl
    • Set 4/Shoulder Right 2.stl
    • Set 5/Buckle.stl
    • Set 5/Calf Left 1.stl
    • Set 5/Calf Left 2.stl
    • Set 5/Calf Right 1.stl
    • Set 5/Calf Right 2.stl
    • Set 5/Chest - Combined.stl
    • Set 5/Chest 1.stl
    • Set 5/Chest 2.stl
    • Set 5/Forearm Left Plate 1.stl
    • Set 5/Forearm Left Plate 2.stl
    • Set 5/Forearm Left Plate 3.stl
    • Set 5/Forearm Left Underside.stl
    • Set 5/Forearm Right Plate 1.stl
    • Set 5/Forearm Right Plate 2.stl
    • Set 5/Forearm Right Plate 3.stl
    • Set 5/Forearm Right Underside.stl
    • Set 5/Hip Plate Left.stl
    • Set 5/Hip Plate Right.stl
    • Set 5/Knee Left.stl
    • Set 5/Knee Right.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 1 - 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Left 2 - 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 1 - 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Calf Right 2 - 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 10.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 11.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 12.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 13.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 7.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 8.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest - Combined 9.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 1 - 7.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Chest 2 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Plate 3 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Underside 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Underside 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Underside 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Left Underside 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Plate 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Underside 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Underside 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Underside 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Forearm Right Underside 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Left 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 5.stl
    • Set 5/Pre-Cut for Smaller Printers/Hip Plate Right 6.stl
    • Set 5/Pre-Cut for Smaller Printers/Knee Left 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Knee Left 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Knee Right 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Knee Right 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - Solid 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - Solid 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - Solid 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - Solid 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - View Holes 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - View Holes 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - View Holes 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Set 5 Mask - View Holes 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Left 2 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 1 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 1 - 2.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 1 - 3.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 1 - 4.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 2 - 1.stl
    • Set 5/Pre-Cut for Smaller Printers/Shoulder Right 2 - 2.stl
    • Set 5/Set 5 Mask - Solid.stl
    • Set 5/Set 5 Mask - View Holes.stl
    • Set 5/Shoulder Left 1.stl
    • Set 5/Shoulder Left 2.stl
    • Set 5/Shoulder Right 1.stl
    • Set 5/Shoulder Right 2.stl

Learn more about the formats
Publication date 2024-11-08 at 15:14
Design number 2451505
GalacticArmory

GalacticArmory

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

3D Print Files in STL format of 5 different Temple Guard armor sets based off released concept art.

5 armor sets in 1! When these Temple Guard concepts dropped I knew I had to make them, they include 3 male sets and 2 female sets!

Each one includes a unique mask with some additional parts that make each set unique. There are some shared parts between sets such as the calves, hip plates, and belt buckles. The Male sets are default scaled to around 6' tall 180 lbs. and female sets to 5'6" 150 lbs.

Each set includes its relevant parts pre-cut for smaller printers.

Set 5 also includes 2 versions of the mask: 1 that truly blocks 100% of your vision, and 1 with thin slits cut along the groove lines to slightly un-obscure your vision.

These files and ALL my other models may be obtained through an annual subscription to the Specialist tier of my Patreon here: https://patreon.com/galacticarmory

Categories

Masks

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.