Mara Sov Queen of the Awoken - by SPARX

A shared commission piece that is now available for you to .
Not really a Destiny Game player myself but got lots of references from client who wanted a more Destiny 1 game outfit, so here she is.
The commission chair was very large so I have added a smaller chair that the model fits into also.
Interchangeable upper, lower torso’s and heads as listed below, compatible with the add-ons also to create your own clothing pose

NSFW ADD-ON pack ;

https://cults3d.sitegames.net/en/3d-model/naughties/mara-sov-adult-add-ons-by-sparx

The model is 1/6th scale and seated in Large Chair is 230mm height x 270 width x 210mm deep
Placed in Small chair 190mm height x 270 width x 200mm deep, but a lot less material!

As normal when sculpting a lot of test prints of the ts are made to test fit, but I have not printed a full model or painted . . .as I mentioned, not a huge fan. I will some of my clients pics when I receive them. .

Parts:
1 Upper Torso Suited and armour
2 Lower Torso’s with & without bottom of tunic under belt.
Loose belt also included should you wish to fix Mara to her set.
4 Heads (plus head pin)
2 Right Shins, (armoured and feet)
3 Left shins
1 Left Arm Suited
1 Large Base plate
1 Large Chair
1 Large chair cushion
1 Small Base plate
1 Small Chair with Cushion (single part)

1 Bonus Head Stand for spare Heads

21 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces .
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less s than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print, make, enjoy.

3D PRINTING SETTINGS
Based on Test prints . .
Resin Printing;
Hollow 2.40 Raft 100%
Head, Legs, Shins

Hollow 2.70 Raft 100%
Upper & Lower torso

DO NOT Hollow
Arms

FDM
Arm, Head, 80% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint separate before ing should you wish.
Fit Upper to lower torso, then fit left arm before head . .