Skip to content

F40 Racecar - 1:10 SCALE

IMG_7721.jpg F40 Racecar - 1:10 SCALE
IMG_7724.jpg F40 Racecar - 1:10 SCALE
IMG_7734.jpg F40 Racecar - 1:10 SCALE
IMG_7729.jpg F40 Racecar - 1:10 SCALE
IMG_7728.jpg F40 Racecar - 1:10 SCALE
IMG_7726.jpg F40 Racecar - 1:10 SCALE
IMG_7730.jpg F40 Racecar - 1:10 SCALE
IMG_7731.jpg F40 Racecar - 1:10 SCALE
IMG_7733.jpg F40 Racecar - 1:10 SCALE
IMG_7727.jpg F40 Racecar - 1:10 SCALE
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • F40 - By STLLabs.zip
    • 01 - Pre-sliced parts/Doors.3mf
    • 01 - Pre-sliced parts/Engine Frame.3mf
    • 01 - Pre-sliced parts/Engine.3mf
    • 01 - Pre-sliced parts/Front bumper and bonnet.3mf
    • 01 - Pre-sliced parts/Front suspension.3mf
    • 01 - Pre-sliced parts/Rear clamshell.3mf
    • 01 - Pre-sliced parts/Tub.3mf
    • 01 - Pre-sliced parts/Wheels.3mf
    • 02 - Tub/Chair.stl
    • 02 - Tub/Front suspension lower arm L.stl
    • 02 - Tub/Front suspension lower arm R.stl
    • 02 - Tub/Front suspension upper arm L.stl
    • 02 - Tub/Front suspension upper arm R.stl
    • 02 - Tub/Front wheelhub.stl
    • 02 - Tub/Frunk.stl
    • 02 - Tub/Monocoque.stl
    • 02 - Tub/Steering rack.stl
    • 03 - Engine/Charge coolers.stl
    • 03 - Engine/Engine block.stl
    • 03 - Engine/Engine cover long.stl
    • 03 - Engine/Engine cover short.stl
    • 03 - Engine/Engine intake middle.stl
    • 03 - Engine/Engine intake side L.stl
    • 03 - Engine/Engine intake side R.stl
    • 03 - Engine/Exhaust manifold L.stl
    • 03 - Engine/Exhaust manifold R.stl
    • 03 - Engine/Filter.stl
    • 03 - Engine/Gearbox.stl
    • 03 - Engine/Small tube L.stl
    • 03 - Engine/Small tube R.stl
    • 03 - Engine/T-split tube.stl
    • 03 - Engine/Tailpipes.stl
    • 03 - Engine/Turbo L.stl
    • 03 - Engine/Turbo R.stl
    • 04 - Engine Frame/Engine frame connection-frame.stl
    • 04 - Engine Frame/Engine Frame L.stl
    • 04 - Engine Frame/Engine Frame R.stl
    • 04 - Engine Frame/Left rear suspension arm lower.stl
    • 04 - Engine Frame/Left rear suspension arm upper.stl
    • 04 - Engine Frame/Left rear suspension spring.stl
    • 04 - Engine Frame/Rear parcel-shelf.stl
    • 04 - Engine Frame/Rear suspension wheelhub.stl
    • 04 - Engine Frame/Right rear suspension arm lower.stl
    • 04 - Engine Frame/Right rear suspension arm upper.stl
    • 04 - Engine Frame/Right rear suspension spring.stl
    • 04 - Engine Frame/Turbo intake L.stl
    • 04 - Engine Frame/Turbo intake R.stl
    • 05 - Rear Bumper/Rear bumper.stl
    • 05 - Rear Bumper/Rear Radiator.stl
    • 06 - Front bumper and bonnet/Bonnet.stl
    • 06 - Front bumper and bonnet/Front bumper spacer.stl
    • 06 - Front bumper and bonnet/Front bumper.stl
    • 06 - Front bumper and bonnet/Front splitter.stl
    • 06 - Front bumper and bonnet/Headlight L.stl
    • 06 - Front bumper and bonnet/Headlight R.stl
    • 06 - Front bumper and bonnet/Popup headlight L.stl
    • 06 - Front bumper and bonnet/Popup headlight R.stl
    • 07 - Doors/Door frame L.stl
    • 07 - Doors/Door frame R.stl
    • 07 - Doors/Door L.stl
    • 07 - Doors/Door R.stl
    • 07 - Doors/Inner Door liner L.stl
    • 07 - Doors/Inner Door liner R.stl
    • 07 - Doors/Mirror L.stl
    • 07 - Doors/Mirror R.stl
    • 08 - Roof and rear clamshell/Dashboard.stl
    • 08 - Roof and rear clamshell/Rear clamshell back (with integrated wing).stl
    • 08 - Roof and rear clamshell/Rear clamshell back.stl
    • 08 - Roof and rear clamshell/Rear clamshell front.stl
    • 08 - Roof and rear clamshell/Rear clamshell louvers.stl
    • 08 - Roof and rear clamshell/Rear grille.stl
    • 08 - Roof and rear clamshell/Rear Light.stl
    • 08 - Roof and rear clamshell/Rear Radiator chute R.stl
    • 08 - Roof and rear clamshell/Rear Radiator L.stl
    • 08 - Roof and rear clamshell/Rear Wing.stl
    • 08 - Roof and rear clamshell/Roof.stl
    • 08 - Roof and rear clamshell/Steering wheel.stl
    • 09 - Wheels/Bearing Replacement.stl
    • 09 - Wheels/Brakedisk.stl
    • 09 - Wheels/Front Rim.stl
    • 09 - Wheels/Front tyre full.stl
    • 09 - Wheels/Front tyre inner.stl
    • 09 - Wheels/Front tyre outer.stl
    • 09 - Wheels/Rear Rim.stl
    • 09 - Wheels/Rear tyre full.stl
    • 09 - Wheels/Rear tyre inner.stl
    • 09 - Wheels/Rear tyre outer.stl
    • 00 - F40 - Assembly Guide.pdf

Learn more about the formats
Last update 2024-07-22 at 13:31
Publication date 2024-06-25 at 17:07
Design number 2089803
STLLabs

STLLabs

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

The F40 racecar is a large 1:10 scale display model inspired by popular vintage racecars.

SIZE / WEIGHT:

  • Total assembly: Roughly 43 x 20 cm
  • Filament: We used roughly 1 kg of filament using 5% infill.

MAKEABLE FOR EVERYONE:

  • Largest single part: 143 x 164 x 62 mm
  • Includes an assembly guide

FEATURES:

  • Rolling wheels
  • Steerable wheels
  • Fully detailed engine
  • Openable doors and s
  • Can be disassembled
  • Easily swappable parts

ADDITIONAL PARTS:

  • M3x6 (2x)
  • M3x8 (10x)
  • M3x10 (32x)
  • M3x12 (4x)
  • M3x16 (4x)
  • M3x20 (4x)
  • M3x25 (6x)
  • M3x30 (6x)
  • M3x35 (8x)
  • M4 hex nut (8x)
  • M4x20 (4x)
  • 2.5 mm Allen wrench
  • 3.0 mm Allen wrench
  • CA-glue

RECOMMENDED SETTINGS:

  • Resolution: 0.2 mm layerheight
  • Infill: 5%, or lightning infill
  • s: Yes, we recommend using organic s!
  • Brim: Advised against warping, not mandatory!

NOTES:

  • Assembly: The model contains an assembly guide, please follow this guide with care.
  • Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!

:

Incase of any problems or questions please us via a private message on here, or over on Instagram or via email: [email protected]

Feel free to share your makes with us on here, or over on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)

Categories

Scans & Replicas

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.