Skip to content

COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)

0.gif COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)
1.jpg COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)
2.jpg COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)
3.jpg COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)
4.jpg COLLAPSING KATANA - KYOJURO RENGOKU - DEMONSLAYER - (PRINT IN PLACE + ASSEMBLY VERSION)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (4 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
1 file (ZIP) Close
  • Rengoku_Collapsing_katana.zip
    • Assembly_version/Blade1.stl
    • Assembly_version/Blade2.stl
    • Assembly_version/Blade3.stl
    • Assembly_version/Blade4.stl
    • Assembly_version/Closer.3mf
    • Assembly_version/Closer.stl
    • Assembly_version/Rengoku_assembly.3mf
    • Assembly_version/Rengoku_assembly.stl
    • New_Method/READ_ME.pdf
    • New_Method/Rengoku_katana.stl
    • blade_print_test.stl
    • Rengoku_katana_print_in_place.stl

Learn more about the formats
Last update 2023-11-28 at 00:49
Publication date 2023-07-06 at 21:56
Design number 1310403
PlayArt3D

PlayArt3D

Certified
Issue with this design? Report a problem.

7 comments

Add a comment

7 comments

talldonkey
talldonkey

Hi! I printed the handle so far and it's huge for a 9 year old. I'd like to print a smaller one. What scaling has worked?

PlayArt3D
PlayArt3D

Hi! The model is not resizable. But you can do it anyway, you might need to do some adjustment to the blades in order to make them work normally. I would say it can reduce up to 70% at most, if you want to try it please go for the assembly version, and see if the blades work correctly, if not please DM me so i can give you the settings to fix it, in case if the blades extend too much or not enough.
JaaYLivE
JaaYLivE

i just recently bought this file and it came out amazing but after a few times of opening it the blade sections come out how do i fix that?

PlayArt3D
PlayArt3D

Hi! Every printer has different tolerances some just need adjustment for the blades, what is your printer and slicer?

JaaYLivE
JaaYLivE

Creality K1 Max and i use Creality print....the sword came out great it just comes apart when slinging it open any help would be great thanks alot

PlayArt3D
PlayArt3D

When slicing the blades, edit your Parameter Config-> Shell -> "Horizontal expansion" and add 0,05 mm. This will make your blade a little thicker. Print just 2 blades and check if they work ok, if not you will need to adjust the value. When you get it right, use the same setting for the other blades. If you need help in detail feel free to DM me on my instagram :)

  • 1 like
klhbalance
klhbalance

Question, we have a Tina 2 which is too short to print at full size. We can make the handle smaller and it sliced and printed with Wiibuilder, but when we try to make the blade files smaller, they do not slice and the image just disappeared. When we slice the blade at full size, it works, but the image is too tall for our small printer. Do you have any tips? Thank you!
Franco777
Franco777

Hola, tienes el molde o fotos de como los pintaste, porfa, para no estar haciendo un dibujo a mano todo el rato. Gracias
oflasalp
oflasalp

Quick question, I just have SLA printer (anycubic photon m3 ) do you have any specific file for this or all files compatible with both SLA and FDM?

PlayArt3D
PlayArt3D

Sorry for the late response, but unfortunately i only have files for FDM printers
julesmathelindelzano
julesmathelindelzano

Bonjour je voudrais savoir combien de temps dure l'impression du modèle
Merci d'avance

PlayArt3D
PlayArt3D

Hi! The katana and blade take around 18hours in total to print at 60mm/s. Around 6hourst at 200mm/s for highspeed printers

julesmathelindelzano
julesmathelindelzano

Thank you for your reply
3DPion
3DPion

how can u make pattern on the blade ?

PlayArt3D
PlayArt3D

I use painters tape to cover it, i draw the pattern and cut it out and then i use spray paint and spray vernish to paint the pattern

Other designs you may like

All

Check out similar designs

Collection(s) associated with this 3D model

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.