Kirche / Church "Klein Wesenberg"

Made a little church for a winter and christmas diorama as a Present. Inspiration was the "Kirche zu Klein Wesenberg" for the main style, only the back part is smaller, because the original would have been to big for my project.
Made in SketchUp 2017 (file in , if you would like to change something)

Hopefully you like it and/or use it for your model town.

Handpainted an lighting via 4x SMD LED warmwhite.
If you want the light it, paint the interior with 1-2 coats of a black paint, else the whole builing is glowing.

I don´t know if it works on filament-style printers.

The building fits into the build volume auf my Mars 2 (the green one) and bigger resin printers.
If you want to print it, place the two many Parts and the top of the belltower directly on the buildplate without or raft to guarantee a flat bottom.

• You do not need for the main parts, because the little stones in the walls print fine without.
• Every part with "Glass" need to be printed transparent
• Every part with "NUMBER + X" in it, print it multiple times accordingly.
• The "roof decor parts" need to be printed in standard an mirrored orientation (left and right) -The main building has a extra wall inside to prevent warping (my first print tried to become a spherical)

#HALOTBUILDING

For Building parts:
60s bottom exposure / 10 layers
3,5s normal layer exposure

For glass parts:
50sbottom exposure / 10 layers
2,5 normal layer exposure