Skip to content

Infinite Palace Set -1 (FOUNDATION) final update

foundation360.gif Infinite Palace Set -1 (FOUNDATION) final update
PIC1.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_154548637.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_155014830.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_155510090.jpg Infinite Palace Set -1 (FOUNDATION) final update
MegabridgesystemADVERT.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230804_125011222.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230804_124843682.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_154347839.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_154454725.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_154910147.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_155512633.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_155553213.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_155614816.jpg Infinite Palace Set -1 (FOUNDATION) final update
IMG_20230919_153934990.jpg Infinite Palace Set -1 (FOUNDATION) final update
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
6 files (ZIP) Close
  • 25% Completely reworked.zip
    • Arch/Arch1.stl
    • Arch/Arch1Bars.stl
    • Arch/Arch1Shutters.stl
    • Arch/ArchTop0rail.stl
    • Arch/ArchTop1rail.stl
    • Arch/ArchTop2rails.stl
    • Bridge/Smallskybridge1Top0rail.stl
    • Bridge/Smallskybridge1Top1rail.stl
    • Bridge/Smallskybridge1Top2rails.stl
    • Bridge/SmallskybridgePTA.stl
    • Bridgecolumns/Bridgecolumn(ALT)0railTOPS.stl
    • Bridgecolumns/Bridgecolumn(ALT)1railTOPS.stl
    • Bridgecolumns/Bridgecolumn(ALT)2railTOPS.stl
    • Bridgecolumns/Bridgecolumn0railTOPS.stl
    • Bridgecolumns/Bridgecolumn1railTOPS.stl
    • Bridgecolumns/Bridgecolumn2railTOPS.stl
    • Bridgecolumns/Bridgecolumnfloor1.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)2trellis.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)3trellis.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)4trellis.stl
    • Bridgecolumns/BridgecolumnStacker2trellis.stl
    • Bridgecolumns/BridgecolumnStacker3trellis.stl
    • Bridgecolumns/BridgecolumnStacker4trellis.stl
    • Floors/Floor1square1nuk.stl
    • Floors/Floor1square2nuk.stl
    • Floors/Floor1square4nuk.stl
    • Floors/Floor1squareFULL.stl
    • Halfwallblocks/HalfBlock1R1.stl
    • Halfwallblocks/HalfBlock1R2CORNER.stl
    • Halfwallblocks/HalfBlock1R2CORNERNOCORNS.stl
    • Halfwallblocks/HalfBlock1R2STRAIGHT.stl
    • Halfwallblocks/HalfBlock1R3.stl
    • Halfwallblocks/HalfBlock1R3NOCORNS.stl
    • Halfwallblocks/HalfBlock1R4.stl
    • Halfwallblocks/HalfBlockFrame.stl
    • Halfwallblocks/HalfBlocKStairway1.stl
    • How to print and glue.rtf
    • How to Use.rtf
    • Maindoor.stl
    • Towerstacker.stl
    • TOWERTOP.stl
    • Wall1block4R4CORN.stl
    • Wall1Frame.stl
    • Wall1R1.stl
    • Wall1R2CORNER.stl
    • Wall1R2CORNERNOCORN.stl
    • Wall1R2STRAIGHT.stl
    • Wall1R3.stl
    • Wall1R3NOCORN.stl
    • Wall1stacker1Trellis.stl
    • Wall1stacker2TrellisCORNER.stl
    • Wall1stacker2TrellisSTRAIGHT.stl
    • Wall1stacker3Trellis.stl
    • Wall1stacker4Trellis.stl
    • Xroof1.stl
    • Xroof1dooradaptor.stl
  • 30% Completely reworked.zip
    • Arch/Arch1.stl
    • Arch/Arch1Bars.stl
    • Arch/Arch1Shutters.stl
    • Arch/Arch1Top0rail.stl
    • Arch/Arch1Top1rail.stl
    • Arch/Arch1Top2rails.stl
    • Bridge/Smallskybridge1PTA.stl
    • Bridge/Smallskybridge1Top1rail.stl
    • Bridge/Smallskybridge1Top2rails.stl
    • Bridge/Smallskybridge1TopOrail.stl
    • Bridgecolumns/Bridgecolumn(ALT)0railTOPS.stl
    • Bridgecolumns/Bridgecolumn(ALT)1railTOPS.stl
    • Bridgecolumns/Bridgecolumn(ALT)2railTOPS.stl
    • Bridgecolumns/Bridgecolumn0railTOPS.stl
    • Bridgecolumns/Bridgecolumn1railTOPS.stl
    • Bridgecolumns/Bridgecolumn2railTOPS.stl
    • Bridgecolumns/Bridgecolumnfloor1.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)2trellis.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)3trellis.stl
    • Bridgecolumns/BridgecolumnStacker(ALT)4trellis.stl
    • Bridgecolumns/BridgecolumnStacker2trellis.stl
    • Bridgecolumns/BridgecolumnStacker3trellis.stl
    • Bridgecolumns/BridgecolumnStacker4trellis.stl
    • Floors/Floor1square1nuk.stl
    • Floors/Floor1square2nuk.stl
    • Floors/Floor1square4nuk.stl
    • Floors/Floor1squareFull.stl
    • Halfwallblocks/HalfBlock1Frame.stl
    • Halfwallblocks/HalfBlock1R1.stl
    • Halfwallblocks/HalfBlock1R2CORNER.stl
    • Halfwallblocks/HalfBlock1R2CORNERNOCORNS.stl
    • Halfwallblocks/HalfBlock1R2Straight.stl
    • Halfwallblocks/HalfBlock1R3.stl
    • Halfwallblocks/HalfBlock1R3NOCORNS.stl
    • Halfwallblocks/HalfBlock1R4.stl
    • Halfwallblocks/HalfBlockStairway1.stl
    • How to print and glue.rtf
    • How to Use.rtf
    • Maindoor.stl
    • Towerstacker.stl
    • TOWERTOP.stl
    • Wall1block4R4CORN.stl
    • Wall1Frame.stl
    • Wall1R1stl.stl
    • Wall1R2CORNER.stl
    • Wall1R2CornerNOCORN.stl
    • Wall1R2Straight.stl
    • Wall1R3.stl
    • Wall1R3NOCORN.stl
    • Wall1stacker1Trellis.stl
    • Wall1stacker2TrellisCORNER.stl
    • Wall1stacker2TrellisSTRAIGHT.stl
    • Wall1stacker3Trellis.stl
    • Wall1stacker4Trellis.stl
    • Xroof1.stl
    • Xroof1dooradaptor.stl
  • IP-SET1-100%.zip
    • SET 1 - WHOLE SET READY TO PRINT/BARS1.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNFACE.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNFLOOR.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNHEAVY.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNLIGHT.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNTRELL.stl
    • SET 1 - WHOLE SET READY TO PRINT/BCOLUMNTRELL-B.stl
    • SET 1 - WHOLE SET READY TO PRINT/BLOCK1FRAME.stl
    • SET 1 - WHOLE SET READY TO PRINT/BPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET READY TO PRINT/BPATTERNSTONELEFT.stl
    • SET 1 - WHOLE SET READY TO PRINT/BPATTERNSTONERIGHT.stl
    • SET 1 - WHOLE SET READY TO PRINT/CAPCORNERRAIL.stl
    • SET 1 - WHOLE SET READY TO PRINT/CAPSTRAIGHTRAIL.stl
    • SET 1 - WHOLE SET READY TO PRINT/DOORADAPTORCAP.stl
    • SET 1 - WHOLE SET READY TO PRINT/FLOORSLAB1.stl
    • SET 1 - WHOLE SET READY TO PRINT/GENRAIL1.stl
    • SET 1 - WHOLE SET READY TO PRINT/GROUNDARCH1.stl
    • SET 1 - WHOLE SET READY TO PRINT/HALFBLOCK1.stl
    • SET 1 - WHOLE SET READY TO PRINT/LOCKINGKEY.stl
    • SET 1 - WHOLE SET READY TO PRINT/OPTIONALSTAIRWAYLOCK.stl
    • SET 1 - WHOLE SET READY TO PRINT/QROOF.stl
    • SET 1 - WHOLE SET READY TO PRINT/RAILPATTERNSTONE1.stl
    • SET 1 - WHOLE SET READY TO PRINT/RAILPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET READY TO PRINT/ROAD1CORNER.stl
    • SET 1 - WHOLE SET READY TO PRINT/ROAD1STRAIGHT.stl
    • SET 1 - WHOLE SET READY TO PRINT/ROADSLOPE.stl
    • SET 1 - WHOLE SET READY TO PRINT/SHUTTER1.stl
    • SET 1 - WHOLE SET READY TO PRINT/SKYBRIDGE1.stl
    • SET 1 - WHOLE SET READY TO PRINT/SKYBRIDGE1PARTB.stl
    • SET 1 - WHOLE SET READY TO PRINT/STAIRSTACK1.stl
    • SET 1 - WHOLE SET READY TO PRINT/STAIRWAY1.stl
    • SET 1 - WHOLE SET READY TO PRINT/STAIRWAYDOOR.stl
    • SET 1 - WHOLE SET READY TO PRINT/STONELEFT1.stl
    • SET 1 - WHOLE SET READY TO PRINT/STONERIGHT1.stl
    • SET 1 - WHOLE SET READY TO PRINT/WALL1.stl
    • SET 1 - WHOLE SET READY TO PRINT/XROOF1FLANK.stl
    • SET 1 - WHOLE SET READY TO PRINT/XROOFDOORADAPTOR.stl
    • SET 1 - WHOLE SET READY TO PRINT/XROOFRIBCENTER.stl
    • SET 1 - WHOLE SET READY TO PRINT/XROOFRIBS.stl
    • TUTORIAL.mp4
    • UNED VERSIONS OF ED/BCOLUMNFACE.stl
    • UNED VERSIONS OF ED/BPATTERNSTONELEFT.stl
    • UNED VERSIONS OF ED/BPATTERNSTONERIGHT.stl
    • UNED VERSIONS OF ED/CAPCORNERRAIL.stl
    • UNED VERSIONS OF ED/CAPSTRAIGHTRAIL.stl
    • UNED VERSIONS OF ED/GENRAIL1.stl
  • IP-SET1-85%.zip
    • SET 1 - WHOLE SET - READY TO PRINT/BARS1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFACE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFLOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNHEAVY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNLIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL-B.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BLOCK1FRAME.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONELEFT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONERIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPCORNERRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPSTRAIGHTRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/DOORADAPTORCAP.stl
    • SET 1 - WHOLE SET - READY TO PRINT/FLOORSLAB1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GENRAIL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GROUNDARCH1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/HALFBLOCK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/LOCKINGKEY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/OPTIONALSTAIRWAYLOCK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/QROOF.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1CORNER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1STRAIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROADSLOPE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SHUTTER1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1PARTB.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRSTACK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAY1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAYDOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONELEFT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONERIGHT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/WALL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOF1FLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFDOORADAPTOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBCENTER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBS.stl
    • TUTORIAL.mp4
    • UNED VERSIONS OF ED/BCOLUMNFACE.stl
    • UNED VERSIONS OF ED/BPATTERNSTONELEFT.stl
    • UNED VERSIONS OF ED/BPATTERNSTONERIGHT.stl
    • UNED VERSIONS OF ED/CAPCORNERRAIL.stl
    • UNED VERSIONS OF ED/CAPSTRAIGHTRAIL.stl
    • UNED VERSIONS OF ED/GENRAIL1.stl
  • IP-SET1-90%.zip
    • SET 1 - WHOLE SET - READY TO PRINT/BARS1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFACE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFLOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNHEAVY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNLIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL-B.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BLOCK1FRAME.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONELEFT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONERIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPCORNERRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPSTRAIGHTRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/DOORADAPTORCAP.stl
    • SET 1 - WHOLE SET - READY TO PRINT/FLOORSLAB1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GENRAIL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GROUNDARCH1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/HALFBLOCK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/LOCKINGKEY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/OPTIONALSTAIRWAYLOCK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/QROOF.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1CORNER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1STRAIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROADSLOPE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SHUTTER1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1PARTB.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRSTACK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAY1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAYDOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONELEFT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONERIGHT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/WALL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOF1FLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFDOORADAPTOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBCENTER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBS.stl
    • TUTORIAL.mp4
    • UNED VERSIONS OF ED/BCOLUMNFACE.stl
    • UNED VERSIONS OF ED/BPATTERNSTONELEFT.stl
    • UNED VERSIONS OF ED/BPATTERNSTONERIGHT.stl
    • UNED VERSIONS OF ED/CAPCORNERRAIL.stl
    • UNED VERSIONS OF ED/CAPSTRAIGHTRAIL.stl
    • UNED VERSIONS OF ED/GENRAIL1.stl
  • IP-SET1-95%.zip
    • SET 1 - WHOLE SET - READY TO PRINT/BARS1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFACE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNFLOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNHEAVY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNLIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BCOLUMNTRELL-B.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BLOCK1FRAME.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONELEFT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/BPATTERNSTONERIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPCORNERRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/CAPSTRAIGHTRAIL.stl
    • SET 1 - WHOLE SET - READY TO PRINT/DOORADAPTORCAP.stl
    • SET 1 - WHOLE SET - READY TO PRINT/FLOORSLAB1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GENRAIL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/GROUNDARCH1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/HALFBLOCK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/LOCKINGKEY.stl
    • SET 1 - WHOLE SET - READY TO PRINT/OPTIONALSTAIRWAYLOCK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/QROOF.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/RAILPATTERNSTONEBLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1CORNER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROAD1STRAIGHT.stl
    • SET 1 - WHOLE SET - READY TO PRINT/ROADSLOPE.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SHUTTER1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/SKYBRIDGE1PARTB.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRSTACK1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAY1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STAIRWAYDOOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONELEFT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/STONERIGHT1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/WALL1.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOF1FLANK.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFDOORADAPTOR.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBCENTER.stl
    • SET 1 - WHOLE SET - READY TO PRINT/XROOFRIBS.stl
    • TUTORIAL.mp4
    • UNED VERSIONS OF ED/BCOLUMNFACE.stl
    • UNED VERSIONS OF ED/BPATTERNSTONELEFT.stl
    • UNED VERSIONS OF ED/BPATTERNSTONERIGHT.stl
    • UNED VERSIONS OF ED/CAPCORNERRAIL.stl
    • UNED VERSIONS OF ED/CAPSTRAIGHTRAIL.stl
    • UNED VERSIONS OF ED/GENRAIL1.stl

Learn more about the formats
Last update 2024-04-27 at 13:44
Publication date 2023-08-03 at 17:10
Design number 1361350
garethmryan

garethmryan

Issue with this design? Report a problem.

3D printer file info

3D model description

BUILD AS HIGH OR AS WIDE AS YOU LIKE!!! Truly huge set, with truly infinite possibilities.

Printed on an ANYCUBIC RESIN PRINTER. Reworked so all are just open and print. No rotating or messing. New roads and locking key included. Also many changes to save on resin supplies. You can follow me on here, or on my FB page on the link button at top of my profile or, if you wish, you can my FB private group "Architects of the emperor" on facebook for any questions, requests or maybe even show off your own builds with these sets.

Tutorial vid included for larger scales. Word document tutorials for 30% and 25% as completely reworked for easy printing at these sizes

minimum build plate size -

100% 127.68 X 119.51 X 168.93 MM = good for 32mm and 28mm minis
95% 121.29 X 113.53 X 168.93 MM = good for 32mm and 28mm minis
90% 114.91 X 107.56 X 168.93 MM = good for 32mm and 28mm minis
85% 108.53 X 101.58 X 168.93 MM = good for 32mm and 28mm minis

30% good for 10mm minis
25% good for 8mm minis

Those few that need s have the ed versions and non ed versions included in there own folder.

STLS IN .............
BARS1
BCOLUMNFACE
BCOLUMNFLOOR
BCOLUMNHEAVY
BCOLUMNLIGHT
BCOLUMNTRELL
BCOLUMNTRELL-B
BLOCK1FRAME
BPATTERNSTONEBLANK
BPATTERNSTONELEFT
BPATTERNSTONERIGHT
CAPCORNERRAIL
CAPSTRAIGHTRAIL
DOORADAPTORCAP
FLOORSLAB1
GENRAIL1
GROUNDARCH1
HALFBLOCK1
LOCKINGKEY
OPTIONALSTAIRWAYLOCK
QROOF
RAILPATTERNSTONE1
RAILPATTERNSTONEBLANK
ROAD1CORNER
ROAD1STRAIGHT
ROADSLOPE
SHUTTER1
SKYBRIDGE1
SKYBRIDGE1PARTB
STAIRSTACK1
STAIRWAY1
STAIRWAYDOOR
STONELEFT1
STONERIGHT1
WALL1
XROOF1FLANK
XROOFDOORADAPTOR
XROOFRIBCENTER
XROOFRIBS

non ed versions of the ed
BCOLUMNFACE
BPATTERNSTONELEFT
BPATTERNSTONERIGHT
CAPCORMERRAIL
CAPSTRIAGHTRAIL
GENRAIL1

30% and 25% Scale STLS completely reworked and designed for easy printing and modularity. All STLS below are available in both these scales.
Maindoor
Towerstacker
TOWERTOP
Wall1block4R4CORN
Wall1Frame
Wall1R1
Wall1R2CORNER
Wall1R2CornerNOCORN
Wall1R2Straight
Wall1R3
Wall1R3NOCORN
Wall1stacker1Trellis
Wall1stacker2TrellisCORNER
Wall1stacker2TrellisSTRAIGHT
Wall1stacker2Trellis
Wall1stacker3 Trellis
Wall1stacker4Trellis
Xroof1
Xroofdooradaptor
Arch1
Arch1Bars
Arch1Shutters
Arch1TOP0rail
Arch1Top1rail
Arch1Top2rails
Smallskybridge1PT1
Smallskybridge1Top1rail
Smallskybridge1Top2rails
Smallskybridge1Top0rail
Floor1square1nuk
Floor1square2nuk
Floor1square4nuk
Floor1squareFull
Bridgecolumn(ALT)0railTOPS
Bridgecolumn(ALT)1railTOPS
Bridgecolumn(ALT)2railTOPS
Bridgecolumn0railTOPS
Bridgecolumn1railTOPS
Bridgecolumn2railTOPS
Bridgecolumnfloor1
Bridgecolumnstacker(ALT)2trellis
Bridgecolumnstacker(ALT)3trellis
Bridgecolumnstacker(ALT)4trellis
Bridgecolumnstacker2trellis
Bridgecolumnstacker3trellis
Bridgecolumnstacker4trellis
HalfBlock1Frame
HalfBlock1R1
HalfBlock1R2CORNER
HalfBlock1R2CORNERNOCORNS
HalfBlock1R2Straight
HalfBlock1R3
Halfblock1R3NOCORNS
HalfBlock1R4
HalfBlockStairway1

Happy printing and look forward to seeing what people do :D ing pics of your work anywhere on internet with links to my page would be so helpful and would be greatly appreciated, which will also allow me to bring you more and keep the price super low. If have any questions please don't hesitate to ask and I will get back to you as soon as I am able, I monitor my feeds daily, so will not be to long before you get a response :D

3D printing settings

Designed and tested by myself many times on a resin printer. Others have done in FDM but I will not be able to advice myself with FDM. I have a very gradual group growing on Facebook you are more than welcome to if wish to ask questions. As there will be people there more than happy to help if I cannot.

Categories

Castles

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.