Der Zeit überdrüssig

Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for 3D-Printing models. Get started with the Ultimate STL platform!

Click here to STLFLIX

Round, rubbery, and somehow punctual. Wall or table, your time, your track.

This STL file is recommended for FDM Printers!
3D Printing Time : Monocolor 10 cm - 03 Hours, 44 Minutes*  (may vary according to you printer model)
Monocolor 20 cm - 10 Hours, 17 Minutes*  (may vary according to you printer model)
Multicolor 10 cm - 13 Hours, 57 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multicolor 20 cm - 01 Days, 08 Hours, 32 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Approximate Measurements: Wall Type - 20 x 20 x 40 cm, and Table Type - 10 x 10 x 30 cm

*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note:  If the clock mechanism comes with a metal bracket used to mount the clock on the wall, do not use it. For the second hand, use the model that comes with the clock engine.

You'll need: Clock Mechanism (Maximum dimension 56mm x 56mm x 16cm)  Amazon - AliExpress

ATTENTION: If your 3D Printer and your Slice Profile has the "Bridge" settings properly calibrated, you can disregard the "s" mode. More information in the "How to Slice" video.

COPYRIGHT & SELLING RIGHTS

This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.

To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited s, and marketing content for every single file.

Go commercial and skyrocket your own store with STLFLIX!

GO COMMERCIAL!

USEFUL LINKS

Get to know us a little better!

Website | Instagram | TikTok | Twitter

What are you waiting for? thousands of other makers from all around the world.

HAPPY PRINTING!

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.16 mm
Recommended Layer Height:  0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 5% (Gyroid)
Needs : Yes. (Tree) mode.
Build Plate Adhesion: No.
Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!