Not sure why your 5M Pro nozzle case has such a low rating? I gave it a 5 Star
Would be even better if you could remove the seem. Or a case that can hold like 6 at the same time. :)
- 0 likes
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇨🇭 Benutzerland: Schweiz
🌐 Bevorzugte Sprache des Mitglieds: Deutsch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
19 Kommentare
Hello! 👋
Thank you for your interest.
There is not enough space in the housing to accommodate more than 3 nozzles horizontally.
That is why there is a second model that can be attached to the top (different ). Then you would have a total of 6 brackets.
You asked if I could remove something, but I didn't understand what you meant in detail.
- 1 like
I was referringto the cylinder case for the nozzles. I love them! I have printed about 6 of them. I was curious if you could remove the seem that is in the case though? And I was also suggesting that you might be able to design an another case that s 6 nozzles at once. Keep up the awesome work!
- 0 likes
Hi! That's an interesting suggestion. Something like that is easy to create. Best regards!
- 0 likes
Easy for you maybe, lol.
- 0 likes
no funciona, falta parte de la rosca hembra.
- 0 likes
El modelo está perfectamente bien. No falta la parte de la rosca interna, no hace falta guiar un tornillo. El espacio se creó para reducir el saliente, de modo que el tornillo encaje y no sea necesario volver a trabajar el modelo.
- 0 likes
My Spanish isn't that good, so I'll say it again in English:
The model is perfectly fine. The part with the internal thread is not missing, it is not needed to guide a screw. The gap was created to reduce overhang so that the screw fits and the model does not have to be reworked.
- 0 likes
Hello,
could you provide me with the .prt or .step file of this star? I would like to change a few little things.
Thanks
- 0 likes
Hello, thank you for your interest. The model is too old and I no longer have any datasets.
- 0 likes
Hi, I'm just wondering with the siku tracks, I don't see a groove for the wheels so just wondering how the trains/trams stay on track when you push them along. Does the track guide them somehow or do the trams fall off if you're not careful? Thank you!
- 0 likes
hello, 👋 I don't know what is meant by grove. I have now printed around 250 Siku track elements for my children. Everything works perfectly. I can't say how it works with trains from other manufacturers. If you are not sure, please buy or a different set. Thank you for your interest
- 0 likes
Can I ask you for a license to put your products on my eBay site? I offer you 5% of every sale for every product you own. I can leave you an Instagram or an email where you can ask for information whenever and however you want. Let me know.
I am ing you on behalf of the EcoPrintingSolution company. these are the details.we are growing little by little and we hope you can help us. Thank you
- 0 likes
Hello, thank you for your interest in my models. Unfortunately, someone is already selling my models without a license (eBay England, violation has been reported), so I'm not happy about it. I invested a lot of my own time modeling them. The models ed here are primarily intended for private s (Cults community). So, no. I'm sorry.
- 0 likes
Hi, I understand, if we can still come to an agreement we are also willing to release any telephone numbers or e-mails to be on the safe side.
or talk for a higher percentage on resale.
Thank you in any case for your reply .
Good work
- 0 likes
What model do you have in mind? In which country do you want to offer it? I am a private person and a conversation (language?) outside of this platform would be better.
- 0 likes
https://www.ebay.it/usr/nitroprints?_trksid=p4429486.m3561.l2559
https://www.instagram.com/ecoprintingsolution?igsh=amN2cTFyaTk5NDF4
hello,here you can see my instagram channel and my ebay site where I sell products. If you want to me in private
- 0 likes
LET ME KNOW PLEASE
- 0 likes
I'm sorry that I'm getting back to you so late. I don't want to market my models commercially. Please don't take offense. The models are intended for private use only and are available to the cults community. Thank you for your interest. So, no.
- 0 likes
ok thank you
- 0 likes
RE: UNDERCOVER 3G0805777A WHEEL HOUSE COVER
Hi, can you advice on how to print the file? I'm using Cura, the main plate of the model seem to float without any .
- 0 likes
And also the width is 3mm shorter comparing to the original
- 0 likes
Hello, I printed it a long time ago, but I don't use Cura. I will check the model and update if there are any differences. You can of course the update free of charge.
- 0 likes
Hello, I have added two new versions. An improved model + an easy printable version.
- 0 likes
Hi, Which file is the updated filament holder? I printed it with three different materials and the roller always breaks off of the screw part, leaving the screw in the holder. Is that the part that has been fixed? Thanks!
- 0 likes
I have reinforced the attachment (in my case PLA, 3 layers, 25% infill) on the printer. It broke when I used a 2kg filament roll. I printed the single-screw roll itself from ABS (4 layers and 40% infill) and it has been stable so far.
- 0 likes
Printed your Thermomix Spatula, PLA 5% infill, came out very nicely!
Wirklich sehr stabile Arbeit muss ich sagen. Hast du hauptberuflich auch mit CAD Modelling zu tun? (Medizintechnik Student hier aus der Schweiz).
- 0 likes
Vielen Dank für das Lob, ich weiß es zu schätzen! Der Beruf hat auch etwas damit zu tun 😉.
Grüße in die Schweiz!
- 0 likes
How is this mounted? I'm wondering if it would be compatible with the Adventurer 4?
- 0 likes
tobimat tobimat
I don't have Adventurer 4, I can't say. The model is for the Adventurer 3. You have to remove a small screw in the middle of the bottom. Then you can remove the fan duct.
- 0 likes
It is possible to attach a caravan housing instead of the side wall. Yes, I haven't taken any pictures of the caravan yet. It's been online for a long time now and I just overlooked it.
- 0 likes
for the little car trailer, there is the wheels, the frame, the sides, but what is the bigger box for? u dont have a photo of it on the trailer
- 0 likes
Hi ! :-)
Great rail! thank you!
Is that possible to design a curve as well? :-)
Greetings,
Fred
- 0 likes
Is in progress, but not yet finished.
Unfortunately, I do not have the time at the moment.
- 0 likes
HelIo, bought your great Tonie. Do you also have the stl in individual parts? I would like to print them in different colors and glue them together for private use.Thank you! Julie
- 0 likes
Darf ich ihre Designs für gewerbliche Zwecke nutzen ihre Daten werden selbstverständlich nicht verkauft nur die fertigen Produkte
- 0 likes
Das möchte ich nicht und bitte um Verständnis.
In die hier veröffentlichten Modelle wurde viel persönliche Zeit investiert.
Trotzdem bedanke ich mich für Ihr Intersse und nehme das anerkennent an. MfG
- 0 likes
Na gut ihre Wahl. Schade eigentlich.
- 0 likes
Und sie verlieren leider eine Kundin. Es freut mich das sie es anerkennen
- 0 likes
Bonjour
merci pour le suivi
Cordialement
- 0 likes
Ils ont aussi des modèles très beaux et créatifs ! respect pour son talent.
- 0 likes
Hello, can you provide me with a 3D model for Garmin Tempe? Thank you
- 0 likes
I will the model to cults, then you can it. Regards!
- 0 likes
Hey, kurze Frage ist es möglich von dir auch eine andere Datei als STL zu erhalten?
Gruß
- 0 likes
Hey ;-) Du hast nicht durch Zufall eine Kreativ Tonie Figur als STL gebaut? Ich würde mir gerne einen übergroßen Tonie aufs Regal setzen und bin jetzt noch nicht fündig geworden.....
Viele Grüsse
Kai
- 0 likes
Are you still interested in a creative Toni figure?
I would let you have it free of charge. Can you tell me how good the model looks printed?
- 0 likes
Hallo, ich würde gerne den Lego duplo LED-Leuchtbaustein (neue Version mit Mikroschalter)
bearbeiten. Gibt es dafür die Möglichkeit das sie mir eine f3d Datei oder ähnliches zukommen lassen?
Liebe Grüße
Mit dem Dateiformat f3d kann ich leider nicht dienen.
Als Alternativ könnte ich eine STP (step) Datei anbieten.
Wäre das eine adequate Lösung für Sie?
Ja, das ist auch eine gute Lösung.
Die step Dateien wurden in einer ZIP Datei hinzugefügt. Viele Grüße
Vielen Dank